SNAP-ON Said It Couldn't Be Done!! PowerDrawer Install On A 68" Epiq
HTML-код
- Опубликовано: 28 фев 2018
- SNAP-ON Said It Couldn't Be Done!! PowerDrawer Install On A 68" Epiq
Excluding the power tool insert the cost for this retrofit is $536.55 USD
**Please do not attempt this unless you are certain you can**
Link to PowerDrawer Install : drive.google.com/open?id=1qg7...
Intro and outro song is Cemetery Gates by Pantera
• Pantera - Cemetery Gat...
New Snap-on Tool Review Merch is available for purchase here:
teespring.com/stores/the-snap...
Merch for the Snap-on Collectors Facebook page is available for purchase here:
teespring.com/stores/snap-on-...
Check out the new Patreon page designed to give you fans some cool stuff that you cannot get anywhere else!!
Click / snapontoolreview to show your love and support for what I do on RUclips!!
BE ONE OF THE FIRST TO GET A CUSTOM STAINLESS TOP FROM SHARK!! sharkequipment.com/password
Please Consider leaving a donation if you like the videos. Every Donation helps the channel get better! Click the link below and start supporting!! Thank you!
www.paypal.me/SnaponToolReview
Thank you for watching! As always leave a like, comment and subscribe!! Everything helps.
I do not work for or sponsored by Snap-on or any other tool company. I have spent my own money on making these videos and all the tools you see in them.
If you have a product you would like to get featured on this channel you can email me directly at toolwhore78@gmail.com
For Fan Mail(please no anthrax or death threats) please forward it to this address:
Joel Neufeld
204-2175 Shaughnessy St.
Port Coquitlam BC
Canada
V3C3C7
SNAP-ON Said It Couldn't Be Done!! PowerDrawer Install On A 68" Epiq 
Авто/Мото
After 22 years in the trade I have been going through the motions...what's the point kind of thing but since i found your channel I have been hyped again. I have been buying tools again based of your recommendations, I just bought a work centre for my Epiq and started a reorganizing. Now I want a power drawer. Your costing me a fortune, Thanks? Seriously, thanks.
Hahaha yeah thanks man I appreciate it.
How much extra was it? And was it worth the extra money or is it worth giving it a go yourself?
In 1989 I screwed a power strip inside a drawer. Cost $5 took 10 minutes including a smoke.
You could have struck big money if you beat them to the idea 😂
I did one in 1982.
Now it just needs some Milwaukee tools to make it worthwhile ;)
Bahaha nah I’m good.
HI Trevor
MotionAutoTv
Milwaukee? You should feel pretty stpid for saying that
Snap on likes Milwaukee , because they got sued by Milwaukee for stealing their battery technology.
Cmon man that drill you were using was pathetically slow, I wasnt worried about you drilling into your hand one bit with how you were using it lol ;P Those m12 fuels really kick ass!
I’ve got a KRL1023 and I love the power drawer... I just couldn’t bring myself to cut into a 15k$ box... You got balls Joel! I’ve been buying snappy tools for 20 years. Great product! Keep up the awesome videos/content ! Thank you!
Awesome Dude! You just gave me the kick in the ass to add a power strip to my top box, a 54" Heritage.
Great vid. Gives the confidence to do it. One thing I sometimes do is cut an x in the square and bend the metal to cut away from the surface.
Very nice. Other brands just bolt into the box with only a couple holes. This is a good space saver.
Do make sure you paint up the cut edges as others have said.
“Zap Strap”. That’s a new one for me. Where I’m from we call that a “cat choker”
For a DIY project that’s gonna pay dividends in saved time and steps not running to a battery bank 10-25 feet away for a fresh pack, you certainly had a reasonable incentive to do this mod.
This is the more reasonable alternative than outright purchase of a new box, and you did an excellent job in getting it all square and cut.
Forgive me for saying so, but your drawer inserts are divine!~
Some touch up paint on the edges would help keep the rust away. And a swivel coupler would help keep that air hose out of the way, makes easier to work with. Nice work.
I was lucky, my snap on box came with a power drawer. I just got my box 3 weeks ago and I love it. Snap on classic.
I'm over in the UK. We don't get the power drawers or the power tops over here due to being 240v and our CE Standards not signing off on it. So we are already on the back foot!
I've got around it by utilising one of the holes that are in the underneath of the toolbox and running the power lead up and securing it to the back of the box with millions of sticky pads and zip ties through them. This makes sure the power lead doesn't come away from the back of the box and catch on the drawers. It's a pretty clean install and means I don't have to cut into my 84". You're a brave man for cutting into yours!!
You not thought of adding a touch of paint to the freshly cut edges to stop them from rusting!?
Surgery on the Epic. The operation was a success !! Excellent video, Joel.
I've had the same box in my possession for all of 7 hours, this is happening!, Box needs to be organized but that drawer be not used as I thought a few hours ago. Thanks for your work!
One of your best videos. IMO. Fun to watch. I want one in my Husky! LOL
Brave man. I would have a really hard time cutting a hole in my epiq. Well done.
Looks bad ass dude! It takes a lot of balls to cut into something so beautiful like that, I wish this was possible to put in my KRL722 .
I own a 68" epic and want to do the same thing excellent job
Just ordered a 68", even though you cant get a powerdrawer, BUT i will follow this GREAT tip. Thanks a million!
You are welcome sir!
Excellent video, awsome install man !!!! Looks great !!!!!
I did my own as well power drawer in my epiq as well but made it all myself
Rock n Roll brother!!! That's awesome stuff Joel!🤘🏻🤘🏻
Thanks brother.
The last pilot hole you drilled made me worried you were gonna drill into the palm of your hand lol. Good looking custom work.
Great post and great job sir, Looks like a great update to a use box, my mind is thinking, thank for showing us all
Thanks and you’re welcome!
8:08 "Hey Tyler, I had a warranty question..."
Bahahaha
So nice i think my epic is a 60 but im gonna look in to if the drawer size is the same i think it is i know the set up of drawrs is the same.as yours nice viseo i now have the re assurance i can do this seeing it been done. Thank you thank you
Great vid and great to watch brilliant job
great video! nice job and I'm so jealous of that Epiq!
So a month ago you did a review on the new extended 3/8 drive 14.4v ratchet. I picked up the standard length one today. Man it is the shit! So happy I got it!
Damn I like that. I wonder if I could adapt that to the box I have... it's not a snap on but similar in size. I must find this out and possibly add to mine as well!!
Mad respect on you! 🙇
thats cool man ! love yo channel too keep pushing it
Hmm. Now you got me thinking. I have been trying to figure out a way to stick a powerbank cabinet onto my KRL7022, and this may be my option! If only my dealer could be bothered to come by more often than every 6 months.
Awesome job man very well done 👍
Nice addition man, it looks good.
great job, looks great! Cuts were right on the money
Thanks man
I have had a 84” epiq triple bank flor 3 years. I just got my hutch today , stainless power top has always been on it but never secured . I just found out there’s holes if u take out the top drawer to secure the top. Then mount the hutch to the top. However I have a gloss black with the silver trim like that one . But this is my question , How do I go about getting the red and carbon fiber ? Is that just vinyl or tape? I have tons of finger nail scratches in my box and it drives me crazy! Thank you in advance love the videos !
Honestly you nailed! Great work! Looks awesome.Enjoy!
Thanks bro.
Men!!!! I just GET A CALL AND I JUST WIN THE SNAP ON TRIPLE PLAY AND MONDAY I WILL GET MY TRAXXASS SNAP ON TRUCK!!!!
You did a very nice job👍👍👍
Awesome!!!thank you for the video
How did you get a cut off wheel on that 90 degree grinder is there a adapter
Do you have a partsist?
I have a older kr1000 I want to convert.
Thank you
Nice job!!!i have a kmp1163 it has the power drawer and power tool organizer.which is cool and all,but the power drawer is in a separate drawer.so it feels like a wasted drawer,wish they could of fit it in one drawer.
Nice video. What's the part number for that magnet you got on the flashlight ? Not the one on the battery, the other one
How many inches of space do you have behind the drawer to the back of the cabinet? For some reason I can see that power particular drawer having a total tool meltdown when batteries burst into flames from charger failures or battery failures and some boxes causing electrocution from improper installs but I hope everything goes smoothly for everyone Maybe a rubber mat in the drawer and an oversized rubber mat for the floor.
Nice,
Great job... but y didnt you hook the ground up in the back side of the stainless where the power chain screwed in?
THAT WAS GREAT THANKS .
Shit. It’s not even my tool box and I’m having anxiety!!
Nice job but is another way with no need of snapon power drawer parts.
I done a few power drawer style mods on snapon and matco boxes, parts and material around $100 to $150 pending exactly what want in terms of sockets surge protection usb outlets etc
You even don't need cut side of the drawer just hole in the back.
Basically use likes of igus cable link track and make guide trough U piece from alloy or stainless, I used brushed alloy, either tig mounting points on or plan bend formed tabs at ends when doing template cut and brake forming it (can also buy guide troughs if want)
Ones I done had cable exit back and top side as sent into a socket strip side mounted with usb ports as most want that feature added plus made easy hookup/hide cable exit point .
Works as good as snappy one, only advantage with cutting side of drawer is better space usage but it minimal .
I actually don't like power drawers as prefer batteries charging in open environment for better cooling so I have a charge shelf on end, adding fan with some sensor control could be an idea in warmer climates.
security factor of all in drawer is good though and can see why guys as employees in a shop like it as save batteries going for a walk or an exchange lol.
Sweet job and the 68 epic is a damn nice box .
Looks awesome man👍👍👍
Boy is in love with his tool box damn ???????
Does this work with any drawer from snap on's list of box? i have a kra2422PU
I’ve watched all of your videos and I just died watching you cut into that tool box looks great tho
Awesome Joel! You are an absolute legend! Fair play m8! Love it!
Haha thanks man!
Gave a thumbs up after one second just because of Cemetery Gates. Watched the rest of the video and still give it a thumbs up.
Hahaha awesome bro!
Love it man I will be doing the same hack on my krl 1033 at Home I already have power tool holder just going to add power supply with a power strip and plastic cable drag chain carrier, should be under $30 love your tho
Great job! Turned out awesome
Thanks bro. I’m pretty happy with it.
Do you have the dimensions of the silver backing / cable track?
I have a classic 78 box and would like to know if it will fit
That cable track is so neat and clean I would like to buy that on it's own and make rest up with own supplies as power drawer is just new in UK but snap on man doesn't think kit is available to buy so would take risk and buy #36 on parts diag and do rest myself no problem
Very nice tool box...😍
Dis you file the edges or put any paint on the edges?
Does cutting a hole in any drawer on your tool box void the warranty or the trade in options?
Can you do a review / demo on a ct725 14.4 1/4 drive cordless impact ?Keep up the good videos and thanks !
Looks awesome
Great video well done.
You sir have the absolute most gigantic balls I've ever seen on anyone. I have a box that's worth $500 and I'd be too afraid to cut it. I applaud you.
Haha yeah it’s uncomfortable to sit. Thanks man.
I love this, it's like watching someone key there own lambo
greenlight19 more like adding a wide body. To each his own.
Just a thought but if you would be ok with loosing some width to the drawer could have you just bolted the piece u cut the side out for to the existing wall since the cord chain rides within it And just cut the back wall of the drawer and back of the toolbox?
Can this same thing be done on a master series box?
Great video . I’m In the uk? Are parts available for 220 volts ?
Do you think that you could do a video of you cleaning and organizing your tool box
Would this work on the 60" epic as well?
Great job!!!!
Looks good but I couldn't cut up my box. I'll just keep my power strip 3m taped on top lol
Did I miss it in the video? Where do I get the pieces from to install?
Dude, you have some cool videos on your channel. But this one is, by far and away, your best to date! Fuck yes!!!!!!!
Thanks bro!
Nice work looks good love your channel 👍🏻
Thanks man!
Excellent 👍
Wow freaking awesome
Looks like you could do this with any SnapOn box. They have the same slots for the slides.
I get having all snap on components but, you can easily fabricate or get a shop to fabricate that piece and buy a PAT tested powerbar with more outlets for much less money.
Nice job!
That’s bad ass! Would love to add your channels sticker to my new tool cart. Let me know if u got any laying around
Hey wanna do this to mine what’s the part numbers don’t see them in your Description
I installed a power draw in my 84" Epic Yesterday. I used your parts list and it went well. I must say that first cut is stressful. Its a matter of getting the courage to take a cut off wheel to your tool box. But as you say this is not a hard project. Just take your time and its fine. Its very simple metal work.
Something I did that I did not see in your video (but I am sure you did and I may have missed) was to buy a bottle of color matched touch up paint from my Snap-on dealer to paint the exposed metal before finally assembly. I wanted to stop future rust and it makes the cuts look factory.
I wish I could post a picture of how mine came out. Like you I am glad I did it. Thanks very much for making this video.
Glad to hear it went well man!!
Where did you find the parts list?
@@edwoods6392 It is in the link for this video.
One thing I found is that the tool holder listed in the parts list is too tall. I had to cut the bottom off so it would fit as it should. But that was a simple fix.
Robert L I looked for the parts in the list. They are all back ordered. Snap on rep won’t sell them to me either. Keeps trying to get me to buy a $4000 hutch instead.
He can order them. I gave the list to my snapon dealer and he order them through the Rock and Roll cab truck. I had them shipped to my snapon dealer and paid for them in the truck. I don't see why he won't order them. Its money in his pocket. It did take 4 months to get the parts. Like everything for snapon tool boxes.
I would try a different dealer or reach out to the Corporate Rocking Roll Cab truck yourself. Tell them to order them as replacement parts.
It's not cheap like all things snapon.
What are dimensions of the drawer you put the charging station in?
Everybody looked at me crazy cause i cut my top drawer on my classic 72 for a cd player but it works i love it and it jams
Very clean job Joel. It looks factory. Some carbon fiber door mold would look nice covering the bare metal on the notch you cut on the back-left corner of your drawer. I see a nice side job business for you modifying tool boxes with power drawers.
Thanks man!
thought they had side cabinets for that, your power drawer?
Nice job! Its always a bit nerve racking cutting into something nice that you can't go back on.
sure was
Another great video!
Very nice. I just had my guy order all the parts to do this. When will you be doing a how to on the ecko power lock system installation? I’ve got the same box in purple.
Interesting thought. I want ecko lock too. Maybe I’ll look into retrofitting my box. I’m glad I could help with the power drawer bro.
Dude that’s awesome
Nice job
Do you know of anyone adding power to a standard stainless top at all? It’s something I’d really like to do on mine
I'm gunna do this to my krl1032.
now thats organization !
( i got my slayer tickets in sacramento california 5/13/18)i love how snap on went old school and gave you flat head screws they could have given 10mm and made it easier on you great set up now do a tool box tour its been a while since the last one i dont remember if i told you iam changing my channel name to John's tool's and more i left my94silva1 so people would recognize me for now
Nice one keep it up!
Joel first I want to say awesome video second Last weekend Saturday I started working at Hyundai dealership as a lube tech but will be working my way up to a full blown tech
Awesome brother. Thanks