This man is a credit 👏 to the construction industry and which ever way he goes he will succeed cause he's a proper grafter and nothing comes for free unless you have a silver spoon 😉
Back in the later part of the 1960s I drove a Matbro Mastiff FE loading shovel, loading tunnel blue clay tipped off a conveyor belt into a pile. The Matbro was powered by a Ford 6 cylinder turbo through a power shift 4 x drive gearbox. Artic steering, disc brakes. fitted with a yard and half bucket. Loading a fleet of Guy Warrior double rear axle tipper with 11 Cu Yard bodies'. It took me 3 mins to load each lorry with 5 scoops, I would purposely dig into the pile more to the right side of the bucket twice and dump onto the front of the truck, followed by two to the left into the rear, lastly one square on the level the load. Pat down side away from me and the the near side. Truck out of the gate, another truck had backed in on the other side of the pile and I was right on loading him. The Victoria Line Tube was being excavated by two Tunnel Boring Machine's that each advance on average 25 ft. per 8hr shift. 24 hrs. x 5. Loading muck away was only done on day shift so time was critical to have tipping room in the yard for the night shifts. The muck away company paid me a bonus to not overload the trucks and trim the load to save the drivers time, plus the owner drivers would pay me 2 shillings to be loaded before my shift start time as the roads were quieter and they could get more trips in. My boss had no problem with that and so I stated at 5 am instead of 7am. I know 2 bob easily bought a pint, maybe even a gallon of petrol so life was good for a teenager.
I’ve watched a couple of business owner videos and they really don’t talk about anything business related just showing their wealth and how cool their office is. You my good friend Danny I enjoy your videos because you actually discuss what type of business you operate and you know the ins and outs of everything and is actually hands on and.
the way these videos are presented is awesome, show you in-depth about these machines and how they work yet keeping the videos entertaining , keep up the good work Dan.
Wonderful seeing brick-and-mortar (literally) businesspeople sharing their knowledge and experience with others. I remember when one of my cousins was younger, he would be crazy about construction site machines. He would've loved your channel!
Bro do more day in life episodes it is so inspiring how you control your day and not let your day to control you! You have tons of stuff to fulfill and you still manage to finish all of them, but there are people who cant do even 1/4 of it... Looking forward to more Day in Life episodes!
Daniel: Love your posts, very educational and entertaining. Also great to see you build your business with quality equipment and practices and be successful. Greetings from Portland Oregon USA
Brilliant Content As Always!! Well Done for the efforts @AshVille & to the main man himself Daniel!! We’d love to see something along the lines of Lorry Attachments & HGV’ing in particular!! Keep it up :D
Dan you really show just how good the machines that you have for the work your guys need to do. Great knowledge and shows the passion of your job which I salute you. I’ve got a lot more respect for the construction industry in the machinery that is evolving for working with materials safely and more efficiently 👏🏾👍🏾
Can you make a video about your life, how did you start the business, what did you study in Uni, what were the challenges while working on the business and yourself, I'm a fan from Dubai that studies in the Uk.
This man has just shown everyone how to make the perfect video. Lie her should give him a brand new machine as a gift for being able to use his video to promote their products. He could sell snow to the Eskimo’s and sand to the Arabs any day of the week.
Yo bruv I really enjoy your videos! I have absolutely no interest in construction but this shit is entertaining af. I'm going to watch all of your videos, like, and leave this comment on all of them. Keep going bro!
Why do they have Blue strobe lights on the rear ? I know the green light is to signify the operator is, or should be, wearing their seatbelt, if they havn't over-ridden the system.
The L586 is a beast ! what are you're thoughts on the John Deere or Caterpillar equivalent ? had my ticket to drive these bad boys for awhile now.. The hydrologic pressure on these lines are no joke, seen some nasty accidents due frayed lines. do you're safety checks people !!
Super cool video some how I came across this in recommendation. Maybe it’s because I own a few loaders newest is the 870k hydraulic but yes it’s only a very expensive Rc
How did you learn about all this you seem very well versed about everything construction. Have you been doing this all your life our did you learn construction in school.
Green flashlight on the cab is from the seat belt ! Pretty much everyone ad this light on the machines to make sure every operator is working safe and use it correctly! You can’t tell that from a RUclips video but this machine has to do some work and sometimes is quite dangerous climbing on the uneven surface till you put the counterbalance on the ground ! SAFETY FIRST!!!
I love a hot, sexy man who knows his stuff whether it be about his machines, cars, renovating flats/houses or anything ... he's just super knowledgeable unlike many running their own businesses. Daniel is one of a kind 💕
Another great video! When we wrapping these? 👀
I would love to be in a video
Wrap it in chrome blue as a prank 👍
It’s good to see a business man that actually knows the ins and outs of the equipment he uses 👌🏼 top man
Coblesmith Electrical that is really true
100% Agree.
Agreed.
Dude, the driver is right next to him, check how many cuts are in the reel.
He dosent lol
Why is this so entertaining but i dont know anything about it 😂😂
I feel the same way. Lol
I was about to give the same comment!
same lol
Daniel literally just advertise his company and Liebherr to the point i want one and i don't even work in construction
Man did all this with his brain and hard work, pretty inspiring
This man is a credit 👏 to the construction industry and which ever way he goes he will succeed cause he's a proper grafter and nothing comes for free unless you have a silver spoon 😉
I’m a software developer, what am I doing here? So damn entertaining!
Back in the later part of the 1960s I drove a Matbro Mastiff FE loading shovel, loading tunnel blue clay tipped off a conveyor belt into a pile. The Matbro was powered by a Ford 6 cylinder turbo through a power shift 4 x drive gearbox. Artic steering, disc brakes. fitted with a yard and half bucket. Loading a fleet of Guy Warrior double rear axle tipper with 11 Cu Yard bodies'. It took me 3 mins to load each lorry with 5 scoops, I would purposely dig into the pile more to the right side of the bucket twice and dump onto the front of the truck, followed by two to the left into the rear, lastly one square on the level the load. Pat down side away from me and the the near side. Truck out of the gate, another truck had backed in on the other side of the pile and I was right on loading him.
The Victoria Line Tube was being excavated by two Tunnel Boring Machine's that each advance on average 25 ft. per 8hr shift. 24 hrs. x 5. Loading muck away was only done on day shift so time was critical to have tipping room in the yard for the night shifts. The muck away company paid me a bonus to not overload the trucks and trim the load to save the drivers time, plus the owner drivers would pay me 2 shillings to be loaded before my shift start time as the roads were quieter and they could get more trips in. My boss had no problem with that and so I stated at 5 am instead of 7am. I know 2 bob easily bought a pint, maybe even a gallon of petrol so life was good for a teenager.
I’ve watched a couple of business owner videos and they really don’t talk about anything business related just showing their wealth and how cool their office is. You my good friend Danny I enjoy your videos because you actually discuss what type of business you operate and you know the ins and outs of everything and is actually hands on and.
I know nothing about construction however the clarity and professional quality of these videos got me hooked
the way these videos are presented is awesome, show you in-depth about these machines and how they work yet keeping the videos entertaining , keep up the good work Dan.
Short and sweet and straight to the point. Always happy to learn something new. Thanks for the share.
Wonderful seeing brick-and-mortar (literally) businesspeople sharing their knowledge and experience with others. I remember when one of my cousins was younger, he would be crazy about construction site machines. He would've loved your channel!
Good job in explaining those complicated pieces of equipment
Like I always say, Danny gets out himself! Diggin this mate.
Bro do more day in life episodes it is so inspiring how you control your day and not let your day to control you! You have tons of stuff to fulfill and you still manage to finish all of them, but there are people who cant do even 1/4 of it... Looking forward to more Day in Life episodes!
Can we get 2 uploads a week, would love to see what you get up to during week with those beauties.
Another great video Dan. Love the camera work and the graphics 👍👍👍
Should consider getting a diesel air compressor, we use one everyday to blow the machines clean.
Exactly, blowing out the rads and airfilter are part of the daily pre use checks
Great video Dan. Would you ever do a video on how you scaled your business to where it is today, from construction to aggregates?
Daniel: Love your posts, very educational and entertaining. Also great to see you build your business with quality equipment and practices and be successful. Greetings from Portland Oregon USA
best construction videos on youtube
Worked with loaders a few times at my job. I'm a noob at operating them but damn it's cool as hell.
8:41 the joystick is an additional option, I had a Liebherr 554 2+2 (18 tons and 40kp/h on road) from 2005 and it was controlled by a joystick
from the option / premium packages indeed!
Ashville Aggregates = Great Videos,Reviews and Great Content 👍👍👍
Brilliant Content As Always!! Well Done for the efforts @AshVille & to the main man himself Daniel!! We’d love to see something along the lines of Lorry Attachments & HGV’ing in particular!! Keep it up :D
Top man! Great company and channel, keep up the quality content.
Dan you really show just how good the machines that you have for the work your guys need to do. Great knowledge and shows the passion of your job which I salute you. I’ve got a lot more respect for the construction industry in the machinery that is evolving for working with materials safely and more efficiently 👏🏾👍🏾
Always good learning and entertaining vids.. Good stuff Dan.
The steering wheel adjustment on the 586 is crazy.
Up and Down
Up and Down
Up and Down
Been waiting all week for an update 👌🏼
That old saying "buy cheap buy twice"....Liebherr/Ashville equals quality!! Great content.
Top machine 👍I operate a Case loading shovel now and again when not driving an 8 wheel tipper for a construction firm in Manchester.Good video 👍
Nice job really respect the hustle and drive you have man!
You're such a motivation dawg, thank you for that...
Haha now you need a nice commission cheque from Liebherr. I think I need one for my daily commute
I have no idea what any of this means but it’s so entertaining to watch
Daniel, you are a marketing genius.
A telehandler doing a shovels job that 566 is a blessing
Came here after seeing you on carwow. Great channel and congrats on an amazing business you've built!
This guy is the man! Good content
Excellent content as usual Daniel ! 🌟🌟🌟🌟🌟
Should of put a normal person in the bucket to show the actual size. Not a 7 ft man mountain
Does either machine have joystick steering? Joystick steering is awesome in tight spaces.
As a shovel driver, my preference is the liebherr, great machines 👍 👍
Top notch mate. Truly idol for me 🙌🏻
Hi how did you get to this stage Daniel?Did you go uni,do A levels ?
Love the videos! Keep them coming
Respect the hard work
Great video Daniel!!
Those are big boys toys and man you are Big.
A single joystick for bucket control in the L586 and 3 different ones in the L566?
Great informative video.
always ashville love your talent
Do interview of the driver how they started and tips
Can you make a video about your life, how did you start the business, what did you study in Uni, what were the challenges while working on the business and yourself, I'm a fan from Dubai that studies in the Uk.
Excellent review looks like you had a bit fun .......who knocked the step off ??
How did you know what the weight was in each machine? Is their a scale in the buckets?
Wow mate, just love your videos, have you any mechanical background?
Good shit. All the way from California USA
Cant believe u once used telehandlers
You gotta love shiney metal
Curious to see how many miles or jobs you can put that CVT thru. I’m a transmission mechanic in US, out of 8 lifts, 5 are always CVT’s
Hello I am the driver of the excavator machine and the charging and news 7 and I love the work of 🚜💪🇩🇿
I vote that dan gets his own #Netflix series explaining construction 🚧 absolutely fantastic content.
Comprehensive video bro. We need move vids about your life day to day
This man has just shown everyone how to make the perfect video. Lie her should give him a brand new machine as a gift for being able to use his video to promote their products. He could sell snow to the Eskimo’s and sand to the Arabs any day of the week.
At 9:02, there is a dead tree that looks set to fall into your yard, across the fence.
Yo bruv I really enjoy your videos! I have absolutely no interest in construction but this shit is entertaining af. I'm going to watch all of your videos, like, and leave this comment on all of them. Keep going bro!
Thanks for the upload Dan, update on the crashed Merc truck?
Nate uk where do you know about this?
@@joshcook8586 it happend in a video
Strangely addictive 🤯
I think he was talking to Yianni when he’s saying bigger than any on your sports cars
Why do they have Blue strobe lights on the rear ? I know the green light is to signify the operator is, or should be, wearing their seatbelt, if they havn't over-ridden the system.
The L586 is a beast !
what are you're thoughts on the
John Deere or Caterpillar equivalent ?
had my ticket to drive these bad boys for awhile now..
The hydrologic pressure on these lines are no joke, seen some nasty accidents due frayed lines.
do you're safety checks people !!
Super cool video some how I came across this in recommendation. Maybe it’s because I own a few loaders newest is the 870k hydraulic but yes it’s only a very expensive Rc
Is it possible to give a running cost video on the machinery?
When he started singing the transformers theme song 😂😂
Can you do a review on the Volvo fmx tipper? cheers!
How did you learn about all this you seem very well versed about everything construction. Have you been doing this all your life our did you learn construction in school.
The Liebherr salesman deserver a raise and higher commission!!!
Experience of the operator helps no matter what the make of the the machine is or size!!
LOVE YOUR VIDEOS !!!!!!
I won't ever need such machines, yet I'm intrigued as if I had an aggregate business.
What buckets do you use on your liebherrs?
Success suites you brother, keep it up
Hey can you please
Do more
Videos about your day in your life and doing business deals and such could learn a lot
He should do the crossbar challenge with his loaders 👍🏻👍🏻
Hey Daniel. Tell us how you got started. What was it that got you interested in this business and how you started.
Thank you!
29.5 inch rims. Bigger than any of your car rims
Donks: Hold my beer
Why do you have a green flashing light on the cab when you already have a amber beacon????
Green flashlight on the cab is from the seat belt ! Pretty much everyone ad this light on the machines to make sure every operator is working safe and use it correctly! You can’t tell that from a RUclips video but this machine has to do some work and sometimes is quite dangerous climbing on the uneven surface till you put the counterbalance on the ground ! SAFETY FIRST!!!
Big up Daniel had to subscribe quality content. My brother god bless
Which machinery or vehicle have a Cummins turbo charger
I Prefer either the CAT 980 or the VOLVO L250....much more reliable...and powerful....
I love a hot, sexy man who knows his stuff whether it be about his machines, cars, renovating flats/houses or anything ... he's just super knowledgeable unlike many running their own businesses. Daniel is one of a kind 💕
very nice machinery.... only you have to clean them in site the are very
wedijvert.
Way too underrated.
He gonna end up on Netflix watch ❤️
Who does your videography.
Nice kit another good vid bud hi from brit man in austrailia
Never by a stage 3B (4i) machine! Stage 4f machines with SCR only are at least with liebherr wheel loaders the best choice.