Wow i think this + conversion kit is the complete look of Dynames. I have been putting off Dynames as I felt it didnt look "soldier" enough with its lean legs and rather empty backpack. This seals the deal for me. Thanks Domaki for showcasing!
Thank you for this amazing review. I love that you are reviewing daban kits and third parties, as nowadays they have a far more complete experience for a cheaper price
Seems like i'm not the only one having trouble mounting the mega launchers onto the back of Dynames. FYI for those intending to make the same build as the video: 1. Mega launcher provides 2 back connector O1 & O2. O1 is just sliding into the back with minimal contact and strongly unable to support the 2 launchers (the back connector will just fall off). 2 . O2 is a back connector with clips at the end, but the issue is that Dynames back armor does not have any grooves/gap for the connector to clip on, unless you purposely pull out the back armor halfway for the connector to clip on and pray that entire back doesn't pop off. I'm thinking of cementing the back connector but it wouldnt work as the plastic-on-plastic contact is too little to support 2 mega launcher. Hope Domaki sees this and show us how its done
Hi Domaki Sir. Can I ask you a few questions? 1) which back adaptor (O1 or O2) did you use? 2) which connectors set up (step 19~30+ in the manual) to go with the adaptors in Question(1)? 3) mind me ask which connector did you use to connect the GN shield to the GN launcher @5:35? Thanks a lot! Hope to hear from you 🙏 Loved your contents btw, been a fan! 😝
Both O1 and O2 may be used, however you must remove the lock for the gn drive in order for it to fit and be secure. Concerning the connections. They're all suitable for dynames. It depends on your desired style; you may use both short and long you can also combine them, depending on the pose you want to achieve. just try to explore it more. thank you for the support!
@@DOMAKI_officialjust to follow up on the O1/O2 back pack thing, I’ve tried but it doesn’t seem to work as the pegs for the O1/2 seems to be short and doesn’t fit into the existing body 🥹 will your side able to show picture/video on how you attach it? Tried multiple times and gave up 🥹 I’m using daban dynames plus xx model conversion kit as per your vid too. But don’t know why mine doesn’t fit 🥲
Hey love the review! Neither O1 or O2 fit dynames and I have removed the gn drive's lock, they are too loose for mounting. Do I need to do something else for O1 or O2 to fit?
hi domaki, i notice that your build always have a clean nubmarks, do you have tips on how to remove the nubmark cleanly, especially the one in an awkward or small location without damaging the surrounding surface?
I made a video showing how I remove nub marks and the tools I use when building kits. Look for the phrase "gunpla toolkit" in my earlier videos. Thank you
So what's next? Supreme Evolution Eternal Star (Stargazer Gundam)? In Era+ Thunderbolt? In Era+ Trailblazer? Iron Toys Star Destroyer (Amazing Exia)? Or Daban 8828 Destiny Gundam?
Wow i think this + conversion kit is the complete look of Dynames. I have been putting off Dynames as I felt it didnt look "soldier" enough with its lean legs and rather empty backpack. This seals the deal for me. Thanks Domaki for showcasing!
Yes, I agree, and thank you enjoy building, targeted and firing!
Thank you for this amazing review. I love that you are reviewing daban kits and third parties, as nowadays they have a far more complete experience for a cheaper price
Yes, Daban and other third parties have frequently requested that I build. Yes, since it is less expensive. Thank you!
I am convinced danban makes the best gunpla
Seems like i'm not the only one having trouble mounting the mega launchers onto the back of Dynames. FYI for those intending to make the same build as the video:
1. Mega launcher provides 2 back connector O1 & O2. O1 is just sliding into the back with minimal contact and strongly unable to support the 2 launchers (the back connector will just fall off).
2 . O2 is a back connector with clips at the end, but the issue is that Dynames back armor does not have any grooves/gap for the connector to clip on, unless you purposely pull out the back armor halfway for the connector to clip on and pray that entire back doesn't pop off.
I'm thinking of cementing the back connector but it wouldnt work as the plastic-on-plastic contact is too little to support 2 mega launcher. Hope Domaki sees this and show us how its done
Nice build 👏
Thank you!
Fuckin wow. All those extras, but yet simply plain and badass. Goes to show, you dont have to over do a gundam build to make it phenomenal❤
Another poison😅.... Nice build bro and still waiting for the next project
Coming soon! Thank you.
Where you buy the stand?
Hi Domaki Sir. Can I ask you a few questions?
1) which back adaptor (O1 or O2) did you use?
2) which connectors set up (step 19~30+ in the manual) to go with the adaptors in Question(1)?
3) mind me ask which connector did you use to connect the GN shield to the GN launcher @5:35?
Thanks a lot! Hope to hear from you 🙏
Loved your contents btw, been a fan! 😝
Both O1 and O2 may be used, however you must remove the lock for the gn drive in order for it to fit and be secure. Concerning the connections. They're all suitable for dynames. It depends on your desired style; you may use both short and long you can also combine them, depending on the pose you want to achieve. just try to explore it more. thank you for the support!
@@DOMAKI_officialjust to follow up on the O1/O2 back pack thing, I’ve tried but it doesn’t seem to work as the pegs for the O1/2 seems to be short and doesn’t fit into the existing body 🥹 will your side able to show picture/video on how you attach it?
Tried multiple times and gave up 🥹
I’m using daban dynames plus xx model conversion kit as per your vid too. But don’t know why mine doesn’t fit 🥲
Got this and the SJL R3 kit in black to make a custom R3 Dynames.
excuse me, is this compatible with regular MG Dynames without conversion xx models?
Hey love the review!
Neither O1 or O2 fit dynames and I have removed the gn drive's lock, they are too loose for mounting. Do I need to do something else for O1 or O2 to fit?
When attaching it to the rear, it should make a snap sound. I hope you get it. btw are you using bandai or daban dynames?
hi domaki, i notice that your build always have a clean nubmarks, do you have tips on how to remove the nubmark cleanly, especially the one in an awkward or small location without damaging the surrounding surface?
I made a video showing how I remove nub marks and the tools I use when building kits. Look for the phrase "gunpla toolkit" in my earlier videos. Thank you
Great ❤❤❤
Thank you!
Is this also compatible with bandai dynames? i cant find a way to attach the connector at dynames' back 😅
it includes a armor part for the back, replace it with the stock on your dynames.
@@DOMAKI_official ohh thank you so much man! and keep posting videos! i really enjoy watching your builds ☺️
gotta be honest its impressive to see that it was designed to work even with the daban bootlegs
Daban MG Dynames is 100% direct copy of Bandai kit anyway.
Isnit compatible to a MG nu or Hi-nu
is this compatible with bandai mg exia?
yes, it’s compatible
do you think it can work on the metal build dynames repair III and the dynames ?
I'm not sure; I didn't have the pleasure of seeing or having the metal build version of this.
So what's next? Supreme Evolution Eternal Star (Stargazer Gundam)? In Era+ Thunderbolt? In Era+ Trailblazer? Iron Toys Star Destroyer (Amazing Exia)? Or Daban 8828 Destiny Gundam?
All of them! 😉 Stay tuned!
I think you should try reviewing motor nuclear mnp-06, it's very cheap but the quality is as good as bandai products
OH there very cheap you sure about that jn the filipines is not
Yes, it is on my requested builds, and I will make a video on it in future.
Can it fit in mjh mg astray noir?
Hanep boss dom Compatible ba sya sa lahat ng 00 Kits? Balak ko sana ilagay kay Nadleeh hehehe keep it up bossing!!
It does not state that it is compatible with nadleeh, although on 00kits most exia variations and astrea versions do. Salamat!
Does it work for bandai avalanche exia or only daban 8808?
yes, bandai ,daban,hobbystar brands are all compatible. it says in the manual. also other 00 exia bandai kits, like 00 quant , 007 sword etc.
Thanks
5:26 music ?
napa-order aq ng armor add ons at mega launcher dahil sa video na e2 eh. ung stand lodi saan mo nabili?
yung stand kasama siya sa mr.model kits. enjoy building!
compatible with bandai MG type f?
yes, astrea type f, are also compatible
Are these add on kits or like 3rd party builds?
yes its a addon kit.
Plastic therapy time. 😌😌😌
wish there was a 1/144 version of the gn launcher
Unfortunately, this add-on is just for 1/100 scale, however it also states that it may be used with 1/144 scale RG models.
Only thing missing is the double Gatling Guns from the GW_EW Heavy Arms under the shields. Will likely get this kit.
Yes, it will be great also on custom builds as well.
Is this dynames 6653 + xx model conversion kit?
Yes, and also with gn high mega launcher add on kit.