@@tiagotavares9569 Take out the plug, undo back plate of the machine, there should be two electric small plugs together in the top right, between these small plugs there is a button, press it until you hear an internal click, this button trips because the heating element is getting too hot. That's why all the lights flash away on the front display. Once you hear that click, put back plate back on and plug in.
You just saved me a lot of money with this. Thank you from a fellow Irishman!
Great to hear 😀
It went again and I managed to replace it again. Hopefully this will be the last time!
Tumble dryer manual had nothing about the flashing lights, but your video was very helpful & solved our problem, cheers!
Thank you from Norway. You saved me a lot of money 😊
You're a good man!
Thanks for the video, it worked and saved me good money.
I seem to have the same problem based on continuity check. Will get the part and see if it fixes the issue. Many thanks for sharing this :-)
have you still got the bush washing machine?
Yes still going!
Where did you get the part ???
EBay.
You will see a part number on the back of the one you need to replace.
I have the same dryer, do you have a clue how to fix the dryer when getting the tank is a full warning light and it's not?
thanks
I’ve just fixed this today, but there was a reset button I pressed all lights went out. Now works fine
A reset button? on this model? where was it located?
@@tiagotavares9569 Take out the plug, undo back plate of the machine, there should be two electric small plugs together in the top right, between these small plugs there is a button, press it until you hear an internal click, this button trips because the heating element is getting too hot. That's why all the lights flash away on the front display.
Once you hear that click, put back plate back on and plug in.
@@stuartsinclair6269 it's not the same model. You've a C8 not a C10. C10 Do not have the reset button