Big numbers to you from the UK 🇬🇧 Chad for taking that on 🙏Serious enough over a workshop pit! Did a clutch on a wagon on the side of the road in France 🇫🇷 on my way back to UK from Switzerland 🇨🇭back in the 80s, and that was with our qualified mechanic who my Boss flew out from England to do the job as quicker and cheaper than getting French to do it, with me handing him spanners and holding things in place, and making the drinks, I learnt a lot that day 👍
My uncle told me 40 years ago " why pay someone else for a job you can do yourself? " and that has been my motto ever since. Saved me a bunch of scratch and even learned something. Really great job Chad! Upwards and inwards.
Great job, and it's a great feeling of accomplishment when you get in and drive it down the road! Changed a few myself, but always had helpers, by myself like you did, now that's an accomplishment! It's not a fun job, but hats off to you man, great job!
Great video Brother Chad, you dud some good hard one on one work my friend. Great content. '''AN"T NOTHING TO BUT TO DO IT. Nice video footage clean and clear recording. ''' TWO THUMBS UP''. Stay safe and blessed. You are the Man. Peace-Out.
Happy to see you got it done!!! One call did it all 😂😂!!! Seriously you have done a fantastic job especially by yourself it’s a great accomplishment!!!!
Also you should install the clutch with the adjustment facing the ground that way when u kill the engine the adjustment usually faces down. Just helpful things. You done awesome
I wanted to comment and tell you how to do it and what looked wrong, but I held off cuz I knew you were going to get her done . They just need to go straight in . And doing it alone just plane sucks . Great job .
Good on you for doing it....done many a clutch on a concrete floor....and on my own as well.....mind you that was 25 years ago...not sure I'd do it now though...
Awesome Awesome video buddy looks like that was a very difficult job it was great watching but properly not so great for you I guess. Your videos are extremely great keep up your great work my friend and stay safe 👍
Great video Chad glad to see you getting the clutch replaced in the Blue truck. Yep it's been fun But you got it done. Looking forward to your next video stay safe Chad and Kim.
When it’s suck, pry it into a gear and turn the yoke back -n-forth while you push. I’m sure you got it by the time we see this of course.. you boys should take notes from this fella ol-son
Well I would help you out but I would NEVER tolerate ANYONE calling me a dumbshit gopher. I was trucking with my grandpa and working on trucks before you were even born.😊
Well I never asked you so I guess you don’t have to worry about it 😂 and I didn’t mean it like that I guess you just took it personal. I like to work alone because so nobody gets in my way but if you’ve ever done a clutch before alone than you know the tedious stuff that needs to be done by a gopher that stays out of the way if you know what I mean 😉
HELLUVA job man !!! I've done lots of them outside, But never even attempted it by myself. You got all the respect in the world from me. 🤘🤙
Thanks 🙏🏻
Big numbers to you from the UK 🇬🇧 Chad for taking that on 🙏Serious enough over a workshop pit! Did a clutch on a wagon on the side of the road in France 🇫🇷 on my way back to UK from Switzerland 🇨🇭back in the 80s, and that was with our qualified mechanic who my Boss flew out from England to do the job as quicker and cheaper than getting French to do it, with me handing him spanners and holding things in place, and making the drinks, I learnt a lot that day 👍
Classic that’s what I need
My uncle told me 40 years ago " why pay someone else for a job you can do yourself? " and that has been my motto ever since. Saved me a bunch of scratch and even learned something. Really great job Chad! Upwards and inwards.
Thanks 🙏🏻
Well done Chad anyone who’s ever changed one of those four piece clutches knows that’s a man sized job
Definitely 💯
That’s a tough ass driveway job for two or three guys , way too go , hell of a job!
Thanks 🙏🏻
I bet that was a good feeling of accomplishment. No easy task. Thanks for bringing us along.
Absolutely
Way to persevere Chad! That looks like back breaking work. You showed great patience, that’s hard to do.
Yeah 👍🏻
Awesome job, Chad. That effing thing fought you all the way. But you conquer it that’s all that matters.👍👍👍
Thanks 🙏🏻
I've done a pickup transmission/transfer case alone using a similar method, that was a ballbuster, much less the weight of this. Big respect Chad
Thanks 🙏🏻
Great job Chad and what a great video on how to change a clutch. Stay safe out there my friend and keep the videos coming, catch you on the next one.
Thanks 🙏🏻
Chad Keegan , Loved and Respected here in England .
Jag ❤️
Good job brother! I just had mine replaced on the road in Florida. Found a small shop in Brooksville FL. That charged me $950 labor plus parts.
Nice
Great job, and it's a great feeling of accomplishment when you get in and drive it down the road! Changed a few myself, but always had helpers, by myself like you did, now that's an accomplishment! It's not a fun job, but hats off to you man, great job!
Thanks 🙏🏻
Great video Brother Chad, you dud some good hard one on one work my friend. Great content. '''AN"T NOTHING TO BUT TO DO IT. Nice video footage clean and clear recording.
''' TWO THUMBS UP''. Stay safe and blessed. You are the Man. Peace-Out.
Bonecrusher
Impressive man. Having confidence in your capabilities. Great job!
Thanks 🙏🏻
Happy to see you got it done!!! One call did it all 😂😂!!! Seriously you have done a fantastic job especially by yourself it’s a great accomplishment!!!!
Thanks 🙏🏻
Chad you should take your cabovers to the Mackinaw St Ignace truck show in the fall. Huge show, and parade across the Mackinac Bridge
I’m only attending shows I can get loads too. I’ve heard it’s a good one though
Also you should install the clutch with the adjustment facing the ground that way when u kill the engine the adjustment usually faces down. Just helpful things. You done awesome
Thanks 🙏🏻
That softer push clutch will be so nice in traffic & stop & go situations.
Yep
Much props for you doing it by yourself! And the first time dangit! Much love peace!
Thanks 🙏🏻
Once I get it close enough I will turn the engine over with a small bar and normally it will slide into the pilot..sweet video
Nice I’ll remember that
Hello brother Chad good to see you again good content and quality on your videos as always
Thanks 🙏🏻
I wanted to comment and tell you how to do it and what looked wrong, but I held off cuz I knew you were going to get her done . They just need to go straight in . And doing it alone just plane sucks . Great job .
Yep
I have always jacked the rear of the truck up a little bit and with assistance of gravity dropped them right in .
Nice
Good job, great learning video. Respect. K.A.M.
Thanks 🙏🏻
Awesome job on getting it done.
Thanks 🙏🏻
Good on you for doing it....done many a clutch on a concrete floor....and on my own as well.....mind you that was 25 years ago...not sure I'd do it now though...
🤙🏻😎
Awesome Awesome video buddy looks like that was a very difficult job it was great watching but properly not so great for you I guess. Your videos are extremely great keep up your great work my friend and stay safe 👍
Thanks 🙏🏻
Awesome video Chad👍👍👍
Thanks 👍
@@1ChadKeegan you’re welcome, brother
Hi Chad. I see you’re doing some repairs. Just wanted to say hi. Take care my friend
😎🤙🏻
Great video Chad glad to see you getting the clutch replaced in the Blue truck. Yep it's been fun But you got it done. Looking forward to your next video stay safe Chad and Kim.
Thanks 🙏🏻
👍 you got her done.
😎🤙🏻
Chad keep on trucking brother
Thanks 🙏🏻
I had the same problem and a friend said to mash the clutch pedal, I did , it jumped right in
Sure worked for me.
Nice 👍🏻
Great Video really like the channel 👍
Thanks 🙏🏻
nice job brother.
Thanks 🙏🏻
Good job Chad.
Thanks 🙏🏻
Good video , not sure I would attempt to do it but kudos on gettin er done.
Thanks 🙏🏻
Also take a duly-grinder and soften the input splines ah lil bit just on the tip will help it slide in without being lined up perfectly
👍🏻
Hi Chad from Yorkshire England well done bro it's not easy on your own truck clutch are Really heavy again i say we'll done 👍🏻👍🏻👍🏻👍🏻👍🏻
😎🤙🏻
That looks like a Mike Rowe level of a dirty job.
Definitely
Oh man what’s goin on? Right there shows your a real O/O!
Thanks 🙏🏻
Greetings chad respect on that solo work that’s a man job could loose a finger & a hand lol by doing it
Yeah
You got your head round it and did it. It there is a next one it won't be as bad.
Absolutely
Just in case people are wondering that is not a convertible 8 or 9 speed.. there’s no back box so it’s just a straight 9-speed.. 😞
Things may change in the future
You need a steam cleaner on the under side of that rig boss . 😎
Then it’d rust 😂
When it’s suck, pry it into a gear and turn the yoke back -n-forth while you push. I’m sure you got it by the time we see this of course.. you boys should take notes from this fella ol-son
Thanks 🙏🏻 what a pain
That is a tough go on your own good job , why not get some coveralls ?
It was 80 degrees
Truck show marrietta ohio fairgrowns Saturday from 11 to 4pm
Right on
Yeah Way too go I used to run 3 coal trucks and I never asked anyone for shit 😅
That’s how to do it
Is that a single plate or a double plate set up chad ..did you cure the oil leak on the steering box as well..
Double and yes it’s dry as a whistle
🍻 bubba…!
🍻
Great job, you could always get a job at Kenworth and do it for a living......lol
I’ll pass 😂
I’m wondering if you changed the bushing in the back of the crank if there was one in there while it was apart????
Negative
Improvising. And using those improvisions.
Always
Well I would help you out but I would NEVER tolerate ANYONE calling me a dumbshit gopher. I was trucking with my grandpa and working on trucks before you were even born.😊
Well I never asked you so I guess you don’t have to worry about it 😂 and I didn’t mean it like that I guess you just took it personal. I like to work alone because so nobody gets in my way but if you’ve ever done a clutch before alone than you know the tedious stuff that needs to be done by a gopher that stays out of the way if you know what I mean 😉