I no this video is 4 yrs old so I don't no if u will get this but I have the exact same ree. My question is is the Shimano DG-04 & DG-06 different reel grease or the same?
Thanks for the vid, I took my reel apart to clean like what you did and a few months later, when I push the bail in the spool doesn't release. It reels in fine. If I spin the spool towards the lure I hear clicking. Any ideas where to look?
The outer layer cylinder piece on the detached section (@8:34) is sticky on mine. I've taken alcohol to the outside of the surface several times and keep rubbing off black. I see you oiled the inside but I can't get the sticky film off the outer layer, is that by design?
Josh D. I ran my dc plate under the tap to wash off saltwater. After putting it back together it worked. It just needed a few casts to get it going again. Inside the plate the chip is well protected. Good luck.
My brake quit working a couple months ago as well. Want to try things on my own before giving up and buying a new reel. Did you get it to work again and how?
if i use only bass fishing no need grease, but in my country we often use baitcast reels for pike fishing and the slippery drag is important because we use light lines... (sorry for my english)
@@daffamaulana6794 grease only to the main gear-pinion, lineguide wormshaft and if you want put grease to the drag. Oil for the two spool bearings and sliding parts. Do not put oil or grease to he spool or the DC.
I no this video is 4 yrs old so I don't no if u will get this but I have the exact same ree. My question is is the Shimano DG-04 & DG-06 different reel grease or the same?
Nevermind someone already asked that question and u already answered
Thanks for the vid, I took my reel apart to clean like what you did and a few months later, when I push the bail in the spool doesn't release. It reels in fine. If I spin the spool towards the lure I hear clicking. Any ideas where to look?
Iknow this is 3 years later, but did you ever figure it out? I’m having that problem right now
The outer layer cylinder piece on the detached section (@8:34) is sticky on mine. I've taken alcohol to the outside of the surface several times and keep rubbing off black. I see you oiled the inside but I can't get the sticky film off the outer layer, is that by design?
also the handle wobbles a bit on mine (in and out) can that be tightened if I take it apart?
@@ultralightfishingguy no, this is normal.
I don't know what the problem is. May be dc system waterproofing. I put oil on the bearing that is inside
Can you make a video taking apart the other side. My dc brake quit working. Think I might have got oil on chip contact or something. Please help
sorry, i have already sold it a few months ago
@@DGxxxK1 did you ever take that side apart?
Thats a major L im sorry for your loss
Josh D. I ran my dc plate under the tap to wash off saltwater. After putting it back together it worked. It just needed a few casts to get it going again. Inside the plate the chip is well protected. Good luck.
My brake quit working a couple months ago as well. Want to try things on my own before giving up and buying a new reel. Did you get it to work again and how?
why did you oil the drag washer? I grease mine.
Its been 2years never upload new video,did he has other channels?
i work pretty much these days so i don't make any more videos. When I have time I prefer to fishing and be with my friends.
did you put grease in between carbon drag washers? would it be slipped?
if i use only bass fishing no need grease, but in my country we often use baitcast reels for pike fishing and the slippery drag is important because we use light lines... (sorry for my english)
Are you using shimano DG 04 and DG 06 or you ment 04 or 06
original Shimano DG04 an DG06. DG04 for the gears and drag, DG06 for other parts, wormshaft etc..
Can i put abu garcia oil and Grease to this reel..fast respon please
yes, no problem.
@@DGxxxK1 what does not affect the DC system
@@daffamaulana6794 grease only to the main gear-pinion, lineguide wormshaft and if you want put grease to the drag. Oil for the two spool bearings and sliding parts. Do not put oil or grease to he spool or the DC.
@@DGxxxK1 but in your video you put an oil to your dc
@@daffamaulana6794 just a drop of oil to the spool bearing.
Jos👍
Привет, а что за смазка? тоже такая , но информации ноль а DC, лайк и подписка
Never knew the metal shaft which lock the drag is different than the rest of other Shimano
@Judah Creed fuck off scammer
@Kieran Mitchell fuck off scammer