YAMAHA XS650 (H) 1981 'Nerd Alert' - Engine Tuning - How To
HTML-код
- Опубликовано: 6 май 2020
- Yamaha XS 650 (H) 1981 Engine Tuning.
This short how to video covers Cam Chain & Tappet adjustment, Setting the Electronic Ignition and Balancing the Carbs
Possibly useful intel for XS650 owners who want to check over their engine periodically. Method, Tools and Tips.
Connect with us:
www.hoxtonmoto.com
/ hoxtonmoto
/ hoxtonmoto 
Авто/Мото
That must be the easiest to follow XS set up I've ever seen, no fluff, no waffle and great shots to show exactly what you're looking for, thanks 👍
Glad it was helpful!
Straight forward. Thanks
Great video, great info. Just picked up a chopper and needed to learn what she needs adjusted. You're a legend!
Glad I could help
Great video mate, really top notch. Helped me tune my xs that really needed some tender loving.
Might I add. My bike really was floundering a lot trying to idle while changing the balancing screw for the carbs.
1200 +-50 rpm is the desired rev range at idle so make sure your balanced carbs are holding that while you tune.
Happy days ❤
i don't know how many times I've watched this video, I always end up coming back to it haha.
see you guys at the beach race this year?
I really needed this thank you 🙏🏻
You're so welcome!
Thanks for all the help. Been after one of these for years, but most I find State-Side, someone newbie has made mincemeat of, and its a sorry lot with jankie, jury-rigged items that need attention. The last one I looked at seemed to have had Jack the Ripper for a fabricator, and couldn't discern if the petrol cell was painted or just bleeding from the violence. Great bit of help on the repair and tune end. Have a splendid day.
Wow you made all this so easy! I have a 1983 sx650 cafe racer that is making a ticking sound!
Very well-explained.
Clean bike. My 80' is pretty filthy from previous owner.
Very well done...
Thank you!
Enjoyed video 👍
Thanks 👍
Very nice... Thanks for posting.
Glad you enjoyed it
Top off the tank with premium non ethanol. It's the air in the gas tank that causes problems.
Isn't the cam chain supposed to be adjusted with the engine warm and running?
Great video, thank you. I have a 1980 Special and this is the 1st vid / forum I have found to set the ignition timing correctly with our orrible ethanol fuel. I had the same problem as you with the Boyer running out of adjustment. Strangely if set 10 degrees BTDC at idle on the left cylinder, checking the right cylinder its about 7 degrees BTDC ? Any Ideas and have you checked yours ?
Hi, that's really odd - I havent checked both cylinders on my XS. May be worth contacting Boyer or asking forums, perhaps there's a tolerance.
Were is the modual located on the Yamaha 650 special and r they interchangeablr
I see the electronic ignition (conversion) in many bikes and lots of RUclipss. But where do I purchase one?? (In The States)
May be worth contacting Boyer Bransden in UK, they will prob send to US www.boyerbransden.com
What if you don’t have points?? I just have a CDI
You adjusted the cam chain wrongly, you need to turn the engine over and watch the pin move in and out, setting the nut to when its out at its fullest and level with the nadjuster nut.
Do you have a video of the proper adjustment procedure on your channel. I need to adjust mine.
@@JamesCouch777 Hi James have a look here ruclips.net/video/eBkheDOSA-o/видео.html
But only when there is no tension on the chain....at top dead centre.
very well explained pity that there is no subtitles in French !!!!
following the images is not always convincing.
Thats a shame, thought you could get subtitles from button - located bottom of screen, 5th icon from right!
@@hoxtonmoto you have to go to the parameter icon and look at the subtitles, unfortunately there are only in English
This guy's got one helluva face.....for radio.
?