I use hair curlers felt wrapped several times, usually cut them in half and separate with rubber tap washers M8. If the washers are loose I glue them carefully onto M10 washers with locktite. Makes these silencer in shrouds much quieter, also you don't have the trouble if a pellet clips a metal baffle 👍. Snowpeak M25 has a proper 1/2" UNF on the front barrel, but the M22, M50, PP750 and P35 have these unsubstantial silencers, just too small and narrow, becomes a problem when they go over 12 ft/lbs and the air blast is too much for them. Then you can use a larger silencer like the Backdraft and do larger hair curler/felt wraps for them, up to 4 compartments works great at silencing that powerful air blast 👍
Sir plz you inform me that, if i want to change my P35 barrel from .177 to .22 cal, so whats parts i need to change or replace ??? I need more power & accuracy. Thanks advance.
this gun is the same as the Stoeger Bullpup XM1...has it ever broken on you...2 of mine have broken and I had to as Amazon for a replacement...the pellets fired inside of the barrel and blew up the finishing washers...i can't find replacement parts for the gun....are there replacement parts for the Artemis?
I stripped down and rebuilt my M50 which has the similar cocking arm in the breech block,, the P35 has it in the middle so you have a couple of rods, pain to get at as you have to dissemble the entire breech, working from the trigger up to the probe and sidearm, cocking arm itself has 2 pressed pins that you cannot take out, at the back is a copper insert secured by 1 vertical pin which you can take out, unscrew the bottom cocking pin and the whole probe assembly slides out the back. Then you can inspect the parts for a break. At the front is another insert 'a cup' that holds the small spring, this is secured by 2 pins which can be taken out. That's the whole assembly for the probe and sidearm, any broken parts can be ordered from a parts supplier 👍
Both kral and p35 are good pcp and I will never regret buying then for the price and accuracy, for me I prefer p35 is case it's compact, light weight and gives me enough shots for what I needed for. I hope that helps your question 😉
![KSI - Dirty [Official Visualiser]](http://i.ytimg.com/vi/VoDh1h1dPUE/mqdefault.jpg)
I use hair curlers felt wrapped several times, usually cut them in half and separate with rubber tap washers M8. If the washers are loose I glue them carefully onto M10 washers with locktite. Makes these silencer in shrouds much quieter, also you don't have the trouble if a pellet clips a metal baffle 👍. Snowpeak M25 has a proper 1/2" UNF on the front barrel, but the M22, M50, PP750 and P35 have these unsubstantial silencers, just too small and narrow, becomes a problem when they go over 12 ft/lbs and the air blast is too much for them. Then you can use a larger silencer like the Backdraft and do larger hair curler/felt wraps for them, up to 4 compartments works great at silencing that powerful air blast 👍
Bro which one is best for Good performance M60B or Avengx?
Where did you get the bipod clamp do you have a link 😊
Sir plz you inform me that, if i want to change my P35 barrel from .177 to .22 cal,
so whats parts i need to change or replace ???
I need more power & accuracy. Thanks advance.
Which size hair curlers please there are different sizes
Had alot of problems with mine cocking and loading rifle .
this gun is the same as the Stoeger Bullpup XM1...has it ever broken on you...2 of mine have broken and I had to as Amazon for a replacement...the pellets fired inside of the barrel and blew up the finishing washers...i can't find replacement parts for the gun....are there replacement parts for the Artemis?
Never had problems though.I usually buy parts from this website for my airguns .spares.bagnallandkirkwood.co.uk/spa-p35/
My P35's Corking lever jammed. Would you advise the solution to rectify this situation. Cheers
I stripped down and rebuilt my M50 which has the similar cocking arm in the breech block,, the P35 has it in the middle so you have a couple of rods, pain to get at as you have to dissemble the entire breech, working from the trigger up to the probe and sidearm, cocking arm itself has 2 pressed pins that you cannot take out, at the back is a copper insert secured by 1 vertical pin which you can take out, unscrew the bottom cocking pin and the whole probe assembly slides out the back. Then you can inspect the parts for a break. At the front is another insert 'a cup' that holds the small spring, this is secured by 2 pins which can be taken out. That's the whole assembly for the probe and sidearm, any broken parts can be ordered from a parts supplier 👍
Would you say the artemis p35 compete and perhaps outshine kral pcps in quality? Cause I'm in a dilema between p35 and the new kral empires.
Both kral and p35 are good pcp and I will never regret buying then for the price and accuracy, for me I prefer p35 is case it's compact, light weight and gives me enough shots for what I needed for. I hope that helps your question 😉
Thank you.