J2534 Flash Programming Class Part 4: Which J2534 device should I buy?
HTML-код
- Опубликовано: 29 сен 2024
- Today I will present another snippet from my J2534 class.
Visit www.L1Training.com to access all of the J2534 class!
Check Out My Amazon Store HERE:
tinyurl.com/yc...
Some other tools I use:
Launch Diagun IV X431
amzn.to/2SVxG27
Autel Elite
amzn.to/2MfabON
SDT-206 Smoke Machine Kit
amzn.to/2FyLQm1
Redline Smoke Fluid
amzn.to/2MbfKhv
Hantek CC-65 Low Amp Clamp
amzn.to/2T4w9Xm
Hantek CC-650 High Amp Clamp
amzn.to/2RVgGeW
AESWave Uscope
amzn.to/2Fw4Fqx
VVDI Key Tool
amzn.to/2SXa4Ky
FLIR ONE Thermal Imager
amzn.to/2MbcjHo
Stick to the subject. Lots of words nothing said.
Power supply that I use is a meanwell LRS-350 30A 12v has a 3 year warranty cost about $35.00, 150mv ripple, excellent quality. For more power I use an RV converter inteli- power 60a . these are all switchmode ps and can be adjusted , just add some battery clips, I got some 10gauge silicone wire that the RC guys use for the cable-nice and flexible.
Hopefully the class isn't like this 32mn video with less than 5 min info
This device not good enuff for BMW vehicle and the ISTAD software, it failed to delete fault code via Terminal change KL15 off) not detected through this Snapon J2534 pasthru pro4. It also failed ISTA icom interface connection sequence.
Do you have any opinions on a cheap j2534 adapter like $125 I seen one for that much and all I need it for is it for Fords fjds tool to reprogram my 2000 ford ranger
Hi Keith. Just found your channel. I’ve been digging up as much as I can find on reflashing and ended up here. Looks like great content. Would love to get ahold of this class. I see I probably missed the boat for patreon but if there is somewhere you are offering this class for purchase I would be interested. Thanks. Keep up the good work.
Steve.
I now house all of the content at L1Training.com
L1 Automotive Diagnostics and Programming LLC yes thanks. I actually ended up finding it after I watched a few of your more recent videos describing that. I purchased your class today there. Thanks very much.
Also, I was watching your bit about the different J2534 devices and you listed AutoEnginuity as an other device. I spoke with them a few weeks ago and their current device is a cardaq unit as depicted in the current picture on their website. Just an FYI.
I use that power supply but I added a voltage meter with a shunt to read up to 100 amp of current as well. I love seeing the current draw as well as voltage to get a good idea of the state of the batteries charge.
Perfectly explained! Great Idea!
I have a volt meter cut into mine, Amp meter would be nice , let me add that to the list!
I use the unit J2534 that comes with the Autel Elite, Works great!
Argeny Sandoval
For what kind of programming do you use it for
Not really
@@JamesValentineBaja1000 how come
@@MarioHernandez-bn6pm because it's not OEM approved. GDS has A lot of problems with them.
can you program used ecm module with j2534
Missed it yet again . No notifications till now .
Hello from Nova Scotia
To bad ease sold out to DENSO
Why ?
hello
I'm cool with your video
SEGUIN Texas
I have to clone an ecu on a 2008 Audi A4 Quattro 3.2 I was looking at the J2534 willl that do it and do I need any programs or a computer to do it
There are very few J2534 softwares that clone
I am looking for original software for Honda , Toyota and BMW
Yep, we cover those in class except for BMW, our BMW class is almost done.
Just now coming across this. Great info brother.
Bull shtttt
lol, ok
Hello does the vcm 2 can be used for gm flashing ecu
What's your DM info need your help
What scan tool/j2345 do you recommend for programming modules/ecm/keys for Acura/Audi? For best bang for your buck?
im608 comes with both as a combo best deal, but when ur getting into diag or keys ur all in and still might have to buy more devices as i ordered my second key programmer to save me when the autel cant do it , which is rare but some vehicles has happend to me .... plus technology sucks and keeps changing so buy the latest tool if possible so u dont got to upgrade right away
Thanks a lot sir learned absolutely nothing about why I clicked on your Video
I will process your refund promptly.
What do u think on the ancellds 600 . Dosent it do all the stuff your talking about?
No
Hey man cool . Iwatched it .
Drink beer
thanks
How does your Patreon work? I’ve never used it. I’m interested.
All the content has been added to L1Training.com and the patreon is no longer active.
👍 👍
I work for Drew Technologies
Can you suggest anything better than Cardaq?
@@CBRRR-eh3ky Idk how you can get much better than a CarDAQ. The CarDAQ Plus 3's are awesome! You can go with a CarDAQ-M as well to add on any Pass Thru attachments for future proofing.
Must be nice...
For a diy guy what’s the cheapest j2534 unit that is Chrysler compatible?
www.controllertech.com/products/pulsar
You don't mention the one is best than all of this is
DGtech CSI 2534
I disagree, but there are many units I did not mention
Get yourself a Guinness surger. luv the stuff. nice vid man
Crap sorry missed it Live had to get cleaned up
Buen vídeo, muy nutritivo, gracias
Estos videos solo se miran no se tragan buey