for the paint shaker, I welded a piece of super duty front driveshaft to a blade, I had split the shaft so I could squeeze a can into it, then screw clamp it tight. works great!
You guys are making it look too good for what it started out as 😂 the level of fabrication is out of this world. You guys are the definition of making things work with what you’ve got. I love it!!!
Stromboli, also known as pizza arrotolata, is a type of baked turnover filled with various Italian cheeses and usually Italian cold cuts or vegetables, served hot. The dough used is either Italian bread dough or pizza dough. Stromboli was invented by Italian Americans in the United States, in the Philadelphia area. Wikipedia
Another great video on The Holy Grail! If you use duct tape or gorilla tape. The sawzall trick works a treat. There's also an actual attachment that is made for that exact purpose. I can't wait to see this behemoth out on some trails.
If you get a race stuck like that again, just run a bead of weld right round the inside, it'll shrink as it cools and usually falls right out. In the unlikely event that it doesn't, you then have a bead of weld to hammer against. It's a common way of removing steering bearing races from motorbike frames which often fit flush with the steering tube.
33:55 This is the perfect candidate to try weld inside of the bearing race method. It will shrink the race when is cool down. Thought i learn it on your video, maybe Matts.
@@bleepinjeep mine is pneumatic Speed adjusts with air input and it WILL hold a rattle can. Thats what I use it for the most. Check it out. I believe you will use it often
I saw a video where a guy made a paint can shaker out of a caulking gun. Took the pressure rod flattened out the hook part to fit in the reciprocating saw.
Mildly fry up some genoa salami thin cut instead of pepperoni for the filling along with all the other ingredients and be amazed at the taste difference. A little tomato sauce with oregano would kick it up a notch.
I had a 1990 w-250 and I always wanted to make a gear shift knob out of one of the hood ornaments from these trucks. They fit the hand just right, just an idea for that if you didn’t have one lol.
Hey Matt great video love it. After you're done with the Jaguar build love to see you do something with that Toyota and turn it into something really cool I double dog dare you to make something really cool out of that Toyota
@@bleepinjeep need a magical elevator that brings up the correct piece of machinery from fairytale land when you need it and disapears when your done. If only eh 🤣 It is a shame you don't have more shop area, when there are 2 projects going it gets tight. The addition added a lot of room but you needed 3x of them. Is it even feasible/allowable to add on more?
@@bleepinjeep I was pretty sure i remembered you having said you maxed out at some point. Maybe you have room for a Tire Rack along the retaining wall past the door? Couple levels for tires and a cover coming off the wall but sloping up so there is more clearance to take the top tire out.
With the jag being British and in keeping with the Holy Grail theme the skid plate should be Brave Brave Concorde (BBC) Lancelots porter who took an arrow for Lancelot and not so nearly been mortally wounded in vain. Scene 14 in The Quest for the Holy Grail.
probably could have just sharpened your 1 1/4 drill bit, I do it all the time when my bits wear out, I've drilled through 1", maybe that's just a hard asf steel idk, also try going with 1 inch then 1 1/16, and the spindle rpms make a big difference
I hope you alternated welding on the pumpkin side to side, rather than welded all of the right and then all of the left. Not very hard to "warp" the tubes out of parallel. I'm pretty darn sure you're aware. 😉
If you want to get a great metal finish with paint, use gloss black as your base color. It gives the metal paint finish a lot of depth and makes it more believable that its metal! Note: The higher gloss black you use the better!
🤔O Matt...I thought you said you didn't want a "dainty" gas pedal...the one you made looked pretty small...will that ware out your leg on a trip? Might have to add some length to the bottom of it... Keeping you all in prayer....i saw all the flooding over there
@bleepinjeep O ok 👍 I couldn't tell on the video and just thought I'd ask...didn't want it bothering you on a trip (after all my surgeries I think about stuff like that) & as long as you like it,that's all that matters... It's going to be a cool rig when you get it done 🤠👍 It'll stand out in a crowd... Thanks for getting back to me...I pray you all have a wonderful & blessed week
Always wondered if there is any concern when welding the tubes about ruining the seals from the heat? Also, is it best to jump from side to side on the tube vs welding all the way around to avoid warping?
Yes and yes, if welding near the seals I would replace them but if you have deep oil in the housing it has always been ok for me, and yes, move around an inch or two here and there.
O man I forgot to ask if you saw the Roll Royce that was on the Gumball 3000 that looked like your build? I keep meaning to look the guy up, it is even a Cummins 24V chassis. But it is a street build with duallys.
The difference in Stromboli and calzone is Stromboli has ricotta cheese and a calzone don’t oh and one has the pizza sauce cook in and the other doesn’t forgot which one is which on the sauce
Miss Hope is a superb lunch lady. She always goes above and beyond. You guys are blessed. 😊
Yes we are
Well, she still doesn't cook flying perches, so there is room for improvement !
A good transmission guy is hard to find and he seems to be a super awesome guy.
Agreed.. 💯🇺🇸👍
Yes, he's really cool!
Much respect to Russell Transmission. What a great guy. Thanks for giving him a great shout out Matt.
Good Luck at the 24 hours to Hell and Back! Excited to see that Content!!
You're a creative genius, no joke!
Thats a good transmission guy right there!! Honest and to the point.
Skid plate needs an equally cool movie reference name. Like “The Tombstone” from Deathrace. Also Josh running from the perch had me in stitches.
Russell seems like a good guy you could hangout with his and just let him talk . I may not understand everything but he explained it well!
That guy sounds like he really knows his transmissions! Looks like you went to the right place.
Indeed
I learned about Stromboli and calzone. Also keep the air spraying while painting for a better finish 😊 God Bless and good luck 😊
Everyone loves the Lunch lady , Y'all are lucky I never had one. So keep her close she's a great part of your show .
Always right there for Bleepin Jeep's build in the onX Offroad Build Challenge is a wonderful lunch lady named, Hope !
I truly hope you guys getta go on Ultimate adventure. Y'all have put in so much hard work & you have the most creative build by far
That was last year, no ua this year. Winner gets 10k this year
@@bleepinjeep10K for the OnX build winner?
And you get to keep the 20K build they paid for?
for the paint shaker, I welded a piece of super duty front driveshaft to a blade, I had split the shaft so I could squeeze a can into it, then screw clamp it tight. works great!
I like the spring perch edit it made me chuckle
The part where the fluid was added to the shock reminded me of 'Alien' when she was initiating the self destruct sequence.
That is what I do ! Every nut and bolt goes in a bucket. It has been a great saver from drive 50 miles to the store
I’ll take a bite of that Stromboli I love that stuff
You guys are making it look too good for what it started out as 😂 the level of fabrication is out of this world. You guys are the definition of making things work with what you’ve got. I love it!!!
I know, my builds always seem to turn out nicer than I originally wanted
Take your welder and run a small bead down the middle of the race, let it cool and it will shrink and the race will come right out.
Ditto…it works!
Ir absolutely does, might or bend a stick rod to get in there. That race will fall out when you are done.
I'll try that next time, this one had the additional rust and crust
@@bleepinjeep the weld bead, around the center, inside the race, shrinks the race and the rust will lose it’s grip.
Stromboli, also known as pizza arrotolata, is a type of baked turnover filled with various Italian cheeses and usually Italian cold cuts or vegetables, served hot. The dough used is either Italian bread dough or pizza dough. Stromboli was invented by Italian Americans in the United States, in the Philadelphia area. Wikipedia
For that skid plate, you could call it “Sir Glance-a-lot”
Another great video on The Holy Grail! If you use duct tape or gorilla tape. The sawzall trick works a treat. There's also an actual attachment that is made for that exact purpose. I can't wait to see this behemoth out on some trails.
The fish edit was perfect! 😂
cool trick for bearing races that are stuck. weld a bead around it and quench it. it shrinks the race and they fall right out.
If you get a race stuck like that again, just run a bead of weld right round the inside, it'll shrink as it cools and usually falls right out. In the unlikely event that it doesn't, you then have a bead of weld to hammer against. It's a common way of removing steering bearing races from motorbike frames which often fit flush with the steering tube.
33:55 This is the perfect candidate to try weld inside of the bearing race method. It will shrink the race when is cool down. Thought i learn it on your video, maybe Matts.
I'm old, I forget stuff
That food looked delicious! Oh yea, nice shop work as usual.
You need to weld a bead around the bering cup, it shrinks it and out it cones!
chillest transmission shop owner in the world😎 i hope we see more of him!
you guys need a mag drill! woulda took care of that 1.25" hole in 45 seconds
The “BLUE” wrench for the win!
Please keep making excellent
Use a hose clamp to affix the pint can to the reciprocating saw blade
🙏❤️😎🤙🛻💨
Matt
Pick up the inexpensive paint shaker from Harbor freight
It does a great job
I use it often on rattle cans
Is it electric, like 120v or what?
@@bleepinjeep mine is pneumatic
Speed adjusts with air input and it WILL hold a rattle can. Thats what I use it for the most.
Check it out. I believe you will use it often
I saw a video where a guy made a paint can shaker out of a caulking gun. Took the pressure rod flattened out the hook part to fit in the reciprocating saw.
Cannot wait to see y’all on 24 hell and back!
Y'all are so cool! My Jeep Gladiator is named MadMax! I'm not completely done with him, still need a few things, but we really need to meet y'all!
Very enjoyable content. Oh, what time is lunch including time zone, I don't want to be late. TKS for sharing 😊.
I really like the way you guys carried that heavy ass transmission right past that two wheel cart leaning against the wall😂😂😂
That would require bending over, ooof
It's probably too late, but calling the skid plate the Fridgidaire would be pretty funny.
Gotta weld a couple worm clamps to a saw all blade to shake the cans.
You should ask Paul for the artificial hip that a fan gave him! That would fit as a shift handle
Mildly fry up some genoa salami thin cut instead of pepperoni for the filling along with all the other ingredients and be amazed at the taste difference.
A little tomato sauce with oregano would kick it up a notch.
I wish I had such a beautiful lunch lady in my house!
Hi guys doing great work on 4x4 love seeing your shows every time cool 😎
I had a 1990 w-250 and I always wanted to make a gear shift knob out of one of the hood ornaments from these trucks. They fit the hand just right, just an idea for that if you didn’t have one lol.
Radiator hose clamps with a heavy duty Sawzall blade
A couple hose clamps hold a rattle can on a saws-all nicely.
reciprocating saw paint shaker is a thing, though welding hose clamps to an old saw blade should work
Yer Ole lady is cool.
Yer lucky brother.
What a lucky man hope makes lunch
I think it's looking great. I would make one
Enjoying the details. Great stuff.
35:38 Old plumber's trick (sawzall cut in a broken off pipe in a radiator for example....home radiator I mean, the type for home heating)
Hey Matt great video love it. After you're done with the Jaguar build love to see you do something with that Toyota and turn it into something really cool I double dog dare you to make something really cool out of that Toyota
VGG clearcoat designed for patina will cover rust and bare metal you only have to spray once
31:41
A Mill would be a very handy tool with what you guys do. A Lathe would also be a great addition.
We just need another shop addition 😫
@@bleepinjeep need a magical elevator that brings up the correct piece of machinery from fairytale land when you need it and disapears when your done. If only eh 🤣
It is a shame you don't have more shop area, when there are 2 projects going it gets tight. The addition added a lot of room but you needed 3x of them. Is it even feasible/allowable to add on more?
No. I'm out of usable land. So I'm just gonna have to clean up eventually. Half the shop is used tires anyway 😆
@@bleepinjeep
I was pretty sure i remembered you having said you maxed out at some point.
Maybe you have room for a Tire Rack along the retaining wall past the door? Couple levels for tires and a cover coming off the wall but sloping up so there is more clearance to take the top tire out.
Another good one. It’s coming along nicely 👍👍
With the jag being British and in keeping with the Holy Grail theme the skid plate should be Brave Brave Concorde (BBC) Lancelots porter who took an arrow for Lancelot and not so nearly been mortally wounded in vain. Scene 14 in The Quest for the Holy Grail.
You can sharpen the tapered / cone step bits. There is a how to post on RUclips. It works .
Once we had turkey and waffles for Thanksgiving breakfast at a friend’s. It was definitely different. 😊
Looking Good 👍😎✊
Did you say you cleaned up the porch, I’m not from the south 😎 but the lunch lady must be happy
on a stuborn bearing race run a weld bead around the inside the race and it will shrink.
Maybe use a hose clamp for your paint shaker
7:40 pumpkin is almost done 😎
NEXT TIME WELD A BEAD ON THE INSIDE OF THE RACE IT WILL FALL OUT. LOVE THE VIDEOS.
Lunch lady cooks for 6 year olds. Big kids lunches….
Hope the storm Missed you guys
Hope you guys didn’t get hit too hard by the storm
I hope not, ill be home tommorow to see
Use 2 hose clamps on the paint shaker
hey matt they do make an attachment to shake paint with sawzall
First time I’ve seen Josh without his necklace
You'll need a reamer bit for that 1.1/4 hole.
probably could have just sharpened your 1 1/4 drill bit, I do it all the time when my bits wear out, I've drilled through 1", maybe that's just a hard asf steel idk, also try going with 1 inch then 1 1/16, and the spindle rpms make a big difference
I hope you alternated welding on the pumpkin side to side, rather than welded all of the right and then all of the left. Not very hard to "warp" the tubes out of parallel. I'm pretty darn sure you're aware. 😉
I did!
If you want to get a great metal finish with paint, use gloss black as your base color. It gives the metal paint finish a lot of depth and makes it more believable that its metal! Note: The higher gloss black you use the better!
Pity that big dish-washer doesn't have a window... and an interior light... Now there's a project for you to consider while having lunch...
Every man wants a Hope haha.
Why was I not invited for the Stromboli?
looks delicious.
Good video.
They have sawzall paint shaker on Amazon 29.00 $
🤔O Matt...I thought you said you didn't want a "dainty" gas pedal...the one you made looked pretty small...will that ware out your leg on a trip? Might have to add some length to the bottom of it...
Keeping you all in prayer....i saw all the flooding over there
At least it looks mean, but yes it's way bigger than the Toyota pedal
@bleepinjeep O ok 👍 I couldn't tell on the video and just thought I'd ask...didn't want it bothering you on a trip (after all my surgeries I think about stuff like that) & as long as you like it,that's all that matters...
It's going to be a cool rig when you get it done 🤠👍
It'll stand out in a crowd...
Thanks for getting back to me...I pray you all have a wonderful & blessed week
The skid plates name is
“Skid Vicious”
Always wondered if there is any concern when welding the tubes about ruining the seals from the heat? Also, is it best to jump from side to side on the tube vs welding all the way around to avoid warping?
Yes and yes, if welding near the seals I would replace them but if you have deep oil in the housing it has always been ok for me, and yes, move around an inch or two here and there.
Run a beat of weld around the inside of it let it cool off and they usually fall out
bearing races
O man I forgot to ask if you saw the Roll Royce that was on the Gumball 3000 that looked like your build? I keep meaning to look the guy up, it is even a Cummins 24V chassis. But it is a street build with duallys.
Swap the front to multi-link!
Indominus splate!
If you use a rosebud torch it should save you a lot of time
I need one, just never got around to buying one
I know you’re busy, but if you get a some time in one of the next videos, can you translate the transmission guy segment for us please thanks 😎
Lol, where are you from that you don't understand Tennessee accent? 😄
@@bleepinjeep Alabama
Skid plate? Cat pan!
That looks just like my drill press
Just need to hose clamp the rattle can to the blade
I call my skid plate "My Belly Bumper".
Nice!
I told myself I would comment on every video I watch today
Yeeyee
They make a tool for using a sawzall to shake your cans ask paul he's got 1
Calzones don't have sauce and Strombolis do
Im first😊 love ur videos
The lunch lady just flung a cravin on me with all of that delicious food. Especially the calzone.
❤😊
🔥💪
The difference in Stromboli and calzone is Stromboli has ricotta cheese and a calzone don’t oh and one has the pizza sauce cook in and the other doesn’t forgot which one is which on the sauce
Box of woe. Ha ha