just use harpic power plus..dilute it 50:50 with water...then spray it to the surface...then wait a 3-5minutes....after that rinse with pressure washer.... settled down.
Let me tell it is a combination of liquid washing dish soap+tartaric acid(powder)+water. I saw many of these videos. Thanks me later... Please use warm water
The first like milk is Multifunction cleaning, u can search some thing like "tẩy đa năng sumo". Second is dish soap and toilet cleaner, u can search some thing like "vim tẩy bồn cầu". Third is washing powder and some thing like soda, maybe like soda powder Na2CO³.
Gday As you can see by all the comments below that everyone wants to know what chemicals you are using! If you make a video like this you need to explain and list the ingredients other wise its just a video of you cleaning an engine and people wont tune in. I hope you understand what I'm trying to say.
Look like you using heavy duty chemical@degreaser.... Just becarefull because it can damage engine surface, paint, gasket & rubber hose.... I use to clean heavy grease on lorry engine in my shop... sory for my bad english
Just share the exact chemical or solution you may used that make reaction/changes to clean your cylinder head.. you've share non sense washing liquid for the first place..
It’s really non sense and useless video..just unsubscrib.. how can you support this video if he never reveals the chemical that he used..one of the useless vlog in RUclips and that’s the REALTALK!..
First off, how do you get such a clean and even rust all over your bike? Second, you told us what you used the first time only, and you didn't with the solution that actually did something...
Hi. I am very curious. How did you remove the rust from the block?? When you applied the second solution, it immediately bubbles up and reacted, what is it? I wanna know thank you!!!
Looked like you were taking a leak on it at first. looks good after clean up. Just roll back the odometer and sell it as a "barn find low mileage cycle" haha
Kapag aluminum lng ang lilinisin,advise ko tuff ang gamitin nyo,balik bago talaga..kaso ang mahirap,di pwede sa iron or paint.kung ganyan lng na wala papatakan,tuff is the best..
The best way to take off rust is with drain-o. Put it with the eater and watch it eat the rust away. It's like doing the same work as the brush but with no brush at all
I think pinag mix mo ung lye solution at sabon..talaga namang nakaka puti ng aluminum. ang lye solution ay ginagamit para pang linis ng mga tibo ng aircondition kaya lang oanasobrahan nag ninipis
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Where are you from?
I am from turkısh
Bangalore, India
VietNamese
Malaysian 🇲🇾💝
I m from Romanian
Im from vietnam 🤚🤚🇻🇳🇻🇳🇻🇳
thank
Việt Nam chào 🤣
Có ai biết dung dịch đó là gì không
Kênh này của người việt mà nhừng không hiểu sao lại không tiếng việt
Để tìm viewer là người nước ngoài. Mình thấy anh ấy làm kênh thông minh đấy.
You should have included a description about the liquid and their function to the cleaning properties you are about to perform.
kaya nga!
The result looks great, but what products are you using at each stage?
Rust acid
Wow nice👍🏻
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Spr
Can you share what stuff do you use for cleaning that dirty?? Please reply. Thanks
kalau aku guna diesel campur sabun bos...mmg berhasil
@@jua.88 Oh itu aku pernah cuba. X bersih plk. Kena rendam ke apa?
@@azizgarage16cuba guna sabun cuci baju yg powder tu....klu xbersih skali..ulang lg skali
@@jua.88 haa aku pakai sabun baju tu lah. Tapi aku basuh kotoran minyak degil tu. Haha x hilang mat.
@@azizgarage16 campur diesel xjd ke??stakat ni aku guna ok ..tp xlah sampai kilat,cuma kesan minyak kesan tanah kebun tu blh tanggal dgn mudah
nice.salute from malaysia
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
hard, arduous work but the effect is excellent. Best wishes
thanks
@@MetalRestorationBholiquid name
Iam from indonesia,awesome video,i will try at home,only 2 minute i can
Good and quick work. Congratulations :).
thank you
Thank you :)
@@MetalRestorationBho can i ask what is the list did you used?
Yeah now we know how.....clap clap clap!!! 👏👏👏
reveal all your used materials needed so that your vlog are usefull okey
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
How can we support you to your next vlog if you don’t reveal you materials that you used..lol!..
How can we support you to your next vlog if you don’t reveal you materials that you used..lol!..
Unsubscribe!..
@@MetalRestorationBho reveal all the materials used for this cleaning process....it's an order.... reveal...👉
Nice.... 👍👍👍👍👍
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Am I the only one that thinks that this is very calming?
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Wow it's amazing so suparrrrrrrrrrrrrrrrrrrr cleaning 🙏🙏🙏
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
just use harpic power plus..dilute it 50:50 with water...then spray it to the surface...then wait a 3-5minutes....after that rinse with pressure washer.... settled down.
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Good work bro
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Let me tell it is a combination of liquid washing dish soap+tartaric acid(powder)+water. I saw many of these videos. Thanks me later... Please use warm water
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
GOOD WORK
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
very clean👍 good job bro!
Oh that's very good information. 💯
Can u inform more detail the tools about it? Thanks 🙏
Soap vinegar
Good work
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Oxalic fowder & joy dis washing liquid, mix it ! put little water, amazing result😮😲
It would be a good video if you put a list of materials you used.
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
They did state it when they put them
@@MetalRestorationBho chuthiyaà they are asking about materials u used!!!
Oil name anti bro
@@MetalRestorationBho you didnt put the materials you use, why will I support?
Gooood like 🏍👍❤✅✅✅
Looked like he was pissing on it! 🤣
Bruh😂🤣😂😂😂
Z polski pozdrawiam serdecznie wszystkich widzów 😁😁
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Can I ask the list of the product used for this video??
The first like milk is Multifunction cleaning, u can search some thing like "tẩy đa năng sumo".
Second is dish soap and toilet cleaner, u can search some thing like "vim tẩy bồn cầu".
Third is washing powder and some thing like soda, maybe like soda powder Na2CO³.
What rubbish
Torco rust.cleaner.
B
Good work Done 👌
Thumbs up 👍
Keep it up 👆
👏 👏
thank so much
The ingredients are good for clearing me
Flitz Metal Pre Clean works wonders ! !
What cleaner did you use?
so good
Great video! Can you send some solution recommendation for EGR / Intake manifold cleaning?
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Ethu umaiya bro super
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
What are the the powder are you used to clean?
Nice information 👌👌
Dishwashing liquid mix with premium gas.. next step diswashing liquid with muriatic acid..3rd step liquid metal polish..
Gday
As you can see by all the comments below that everyone wants to know what chemicals you are using!
If you make a video like this you need to explain and list the ingredients other wise its just a video of you cleaning an engine and people wont tune in.
I hope you understand what I'm trying to say.
thanks bro so much
@@MetalRestorationBho Fity mou , tere thanks ty
Step #1 Engine degreaser
Step #2 scrub engine degreaser and wash
Step #3 aluminum brightener
Step #4 scrub aluminum brightener
Step #5 wash
Engine brand new again
Kha pa milega ya comical
Look like you using heavy duty chemical@degreaser.... Just becarefull because it can damage engine surface, paint, gasket & rubber hose.... I use to clean heavy grease on lorry engine in my shop... sory for my bad english
thanks for sharing
great job
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Just share the exact chemical or solution you may used that make reaction/changes to clean your cylinder head.. you've share non sense washing liquid for the first place..
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
It’s really non sense and useless video..just unsubscrib.. how can you support this video if he never reveals the chemical that he used..one of the useless vlog in RUclips and that’s the REALTALK!..
?
@@MetalRestorationBho chemical name used for cleaning
Try thinner. It will also clean like this.
Bricks ka powder daal kar saaf kar diya . Video bnakar kuch ki nazro me fankar bhi ban gaye ... Wah mere dost
First off, how do you get such a clean and even rust all over your bike? Second, you told us what you used the first time only, and you didn't with the solution that actually did something...
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
brown paint...
Very nice to share very clean back to aluminom
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Imagine 5x to be just clean and using time lapse
Nice trick
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Hi. I am very curious. How did you remove the rust from the block?? When you applied the second solution, it immediately bubbles up and reacted, what is it? I wanna know thank you!!!
It was mud, not rust
@@Sujeesh_Bhosri Can you tell me what solution I can use to remove corrosion and rust? to make it look new again?
@@richlegaspi9050 use sand paper and wire brush to remove the rust. After that apply red oxide before applying the paint.
Hai bro good video and useful but your using likvid not mansan pls inform comments reply 👍👍👍
Rust will come back eventually
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Galing kintab na idol..
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Напиши состав средств для очистки в описании
Wah mantap cara mencuci sepeda motor nya itu kawan ku keren banget lanjutkan salam kenal dari kawan baru dan salam sukses selalu ya kawan ku
Looked like you were taking a leak on it at first. looks good after clean up. Just roll back the odometer and sell it as a "barn find low mileage cycle" haha
thanks
Je suis Camerounais et j'aime la mécanique
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
What was the point of all that effort cleaning the cylinder covers when the rest of the bike still looks crap!?!?!
very nice sir
Mao nay naka daot nimo kai dli ka mo saba unsai imong gipang gamit. Mura kag gi bitok amawa ka
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Top 👍
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Queria que fosse em português
Kapag aluminum lng ang lilinisin,advise ko tuff ang gamitin nyo,balik bago talaga..kaso ang mahirap,di pwede sa iron or paint.kung ganyan lng na wala papatakan,tuff is the best..
Dapat po sinasabi mo ang chemical na ginagamit niyo. Bad vlog.
Try mo lang oxalic powder tsaka joy thnk me later.
Ai walang mabilian ng oxalic sa amin sa mindanao
The best way to take off rust is with drain-o. Put it with the eater and watch it eat the rust away. It's like doing the same work as the brush but with no brush at all
U didn't give what things u used to clean it thats why I didn't subscribe and dislike your video
Wow very nice and listenable music
thanks
Good work done. 👌🏻👌🏻👌🏻
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Good
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Thank u
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
nice bro... anu ba mga ginamit jan bro. kc yung motor ko lilinisin ko rin.. slamat
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
I think pinag mix mo ung lye solution at sabon..talaga namang nakaka puti ng aluminum. ang lye solution ay ginagamit para pang linis ng mga tibo ng aircondition kaya lang oanasobrahan nag ninipis
Great job!
thank you
What did u use the 2nd round of cleaning
First time cleaning you mentioned
satisfying
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Thx
thanks bro so much
It's very nice but what type of products u are used in this cleaning
1:48 in amazing what was that solution?
Bro please write process in description of your video it will help alot
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Acid used all times after the first. Even toilet bowl cleaner will work.
thank you
Wow keren banget
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Can i ask what is powder substance you used? And the other cleaning materials you used? Pls......
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
I wish 1000 subscribers
Very good work done
Nice
which chemicals well using brother
Can you be tell in details the materials you used to gain this final outcome.
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Kênh của người việt chất lượng quá
Thanks for your feedback. I hope you will support us in the next video.♥️♥️♥️
Wash karne ke liye kya kya use kiya bhai ...jara batana
👍 mantap
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Water or petrol this one 🤔full item name plz tell me bro
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Music plays when there is foam.🤣
Good men !!!
thank you
1:45 se aap kon sa product use kiya btaoge thoda
What products you are using this stage
Top!!
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
1:43 can U tell me wt is the name of the Greenish semi sloid Liquid?
Daily clean .. no problem
#beautiful brazil 👌👍👏
thank bro
Haloo sir so many bikes are same swithvation in village areas pls which camicals use 1 st code and 2 and 3 pls hope your reply
Thanks for your feedback. I hope you will support us in the next video.🥰🙏🙏
Aí qual é o nome desses produtos q vc usou pra fazer essa limpeza mano🤔🤷♂️🤷♂️❔❓❓
não adiantou nada, o cara não disse oq usou pra clarear a peça