It worked. Thank you 🙏My LG 4K UHD TV is back to normal now. When you cover the bus lines on the ribbon leave the first 3 lines open and cover 5 lines ( 4,5,6,7,8). That will do. Carefull when you pull the ribbon not to damage the circuit. There are no side locks to push to unlock the ribbon. Simply pull it carefully. That will do. Also you will notice that there are two ribbons. They light up screen half and half. Only one of them need to be fixed. Video shows which one to pick.When you pull a ribbon half of the screen goes blank. Once you fix the ribbon by isolating bus lines as shown in the video please put the ribbon back to the slot. That will do😊 Mine works.
I had the same problem in all screen! I called LG service support and they said that I needed a new panel around 600€!! I followed the video step by step and problem SOLVED!!! Huge thank you my friend!!!
Oh man, you dont know how many videos I have watched, how many articles I have read about this issue. I spent weeks searching for a solution and finally, you came into my life. This was the only solution that worked for me. Many thanks for sharing
This video really help me to repair the same issue in my LG tv. This knowledge sharing is beautiful & mind blowing. Many many thanks for your effort. Keep sharing such a wonderful knowledge.
Clear and practical, good job. I do the same a year ago, but it's happening again, what I would do now? I mean, if it occurs in the other side, could I do the same procedure or it can't?
Complimenti, hai fatto una bella lezione di assistenza tv, mi dispiace di non comprendere la tua lingua ma continuerò a seguire i tuoi video. Buon lavoro e buona giornata.
Good afternoon, thanks a lor for your video. I have approximately the same LG Tv with almost the same TC Board. I have signals Clock 1 to Clock 8. But on your video it's looking like you have not apply tape on the 3 firsts ones. Why ? I was wondering that we have to block all the clocks signals.. ? Thanks a lot for your answers !
i have the same problem with my LG 55UF77OV-ZL, THE SCREEN SHAKES JUST AS ABOVE AD I HAVE TRIED YOUR METHOD BUT NO LUCK. COULD IT BE THE FAULT OF THE AWM CABLE?
mund të ndihmoni mua? I have a 42" Philips lcd tv. When I plug the tv to mains power it auto start from stand by to white then it clicks, the white LED light stays on for 8 seconds, then clicks off. The screen itself never comes on at all (not even the "Philips" startup screen) and there is no sound from the speakers. I removed the back and I don't see any bad capacitors. The fuse appears to be good as well even mosfets. I do hear a VERY slight buzzing noise coming from the power supply then stops.
Thanks for the video. But Is it correct way to repair on permanent solution. If the dc power / signal stops by pasting plastic tape, might be corrupt another component ? Any circuit designers, please explain !!!!
Good job. But may I know what was the main cause of this malfunction? What is the function of the pins that you covered? Is not there any way to fix the fault that is causing that malfunction in the first place?
I have the same question... But he can't explain maybe communication gap. We can get those answers by taking a Schematic for that Board, the pins will be explained in there
it depends on the defect of the screen, there are TVs that require more lines to cover, there are TVs that require fewer lines to cover, you must try to be successful. even if you don't cover the lines correctly, nothing happens. the only way is to try
I like your videos but I can't understand your language can you please add an English translation or caption to your videos and thank you for the great work
The culprit is not the cable but really the display itself, masking the defective connection shorted inside the glass will sometime resolve the problem
It worked. Thank you 🙏My LG 4K UHD TV is back to normal now.
When you cover the bus lines on the ribbon leave the first 3 lines open and cover 5 lines ( 4,5,6,7,8). That will do. Carefull when you pull the ribbon not to damage the circuit. There are no side locks to push to unlock the ribbon. Simply pull it carefully. That will do. Also you will notice that there are two ribbons. They light up screen half and half. Only one of them need to be fixed. Video shows which one to pick.When you pull a ribbon half of the screen goes blank. Once you fix the ribbon by isolating bus lines as shown in the video please put the ribbon back to the slot. That will do😊
Mine works.
I had the same problem in all screen! I called LG service support and they said that I needed a new panel around 600€!!
I followed the video step by step and problem SOLVED!!!
Huge thank you my friend!!!
Oh man, you dont know how many videos I have watched, how many articles I have read about this issue. I spent weeks searching for a solution and finally, you came into my life. This was the only solution that worked for me. Many thanks for sharing
This video really help me to repair the same issue in my LG tv. This knowledge sharing is beautiful & mind blowing. Many many thanks for your effort. Keep sharing such a wonderful knowledge.
Worked for my Philips 50PUS7046/12 ! Nice job.👌
May you explain what append and why to mask the signal repair this issue ?
GENIUS, worked at the first try, i have no idea why and how it worked, but it worked. The Best. Mine was a 55UJ7500-SB made in Mexico, 2018.
Clear and practical, good job. I do the same a year ago, but it's happening again, what I would do now? I mean, if it occurs in the other side, could I do the same procedure or it can't?
Complimenti, hai fatto una bella lezione di assistenza tv, mi dispiace di non comprendere la tua lingua ma continuerò a seguire i tuoi video. Buon lavoro e buona giornata.
Thanks for sharing this nice trick. It works.
I have tried many times with different tape width to get the "best" picture.
Now I can invite friends to watch the World Cup
you beuty. Also worked on my 60uh770t. Saved me buying a new tv!
How do you know how much area to tape? I have 65uh770t.
gud day sir how many pins you blocked on the flex cable sir???
Hi!,Greetings from Córdoba,Veracrúz...México.Thanks for the Info.
Good afternoon, thanks a lor for your video. I have approximately the same LG Tv with almost the same TC Board. I have signals Clock 1 to Clock 8. But on your video it's looking like you have not apply tape on the 3 firsts ones. Why ? I was wondering that we have to block all the clocks signals.. ?
Thanks a lot for your answers !
How many bus lines should I cover with tape ???
Great video. Interesting how a piece of adhesive tape can help.
Great job mate!
Thank you very much from Australia!
Thanks from Sénégal west africa
i have the same problem with my LG 55UF77OV-ZL, THE SCREEN SHAKES JUST AS ABOVE AD I HAVE TRIED YOUR METHOD BUT NO LUCK. COULD IT BE THE FAULT OF THE AWM CABLE?
You are great
Helping video
Thank you very much
Très bon travail 👍👍
mund të ndihmoni mua? I have a 42" Philips lcd tv. When I plug the tv to mains power it auto start from stand by to white then it clicks, the white LED light stays on for 8 seconds, then clicks off. The screen itself never comes on at all (not even the "Philips" startup screen) and there is no sound from the speakers. I removed the back and I don't see any bad capacitors. The fuse appears to be good as well even mosfets. I do hear a VERY slight buzzing noise coming from the power supply then stops.
Thank you! This worked perfectly!!
Isolating the CKV lines. It can also be done on the flex to the mainboard
Outstanding work young man keep up the good Work 👍
Thanks for the video. But Is it correct way to repair on permanent solution. If the dc power / signal stops by pasting plastic tape, might be corrupt another component ? Any circuit designers, please explain !!!!
he blocked the clock signal. if the clock signal generator malfunctions you can disconnect it from the panel to fix the issue.
@@FayanG indeed no why to fix it other wise modern tv's are just chinese made garbage
you are great i am proud of you
Thanx lot Mate, your a life saver brother
I have a LG 50 inch model 50LB6300 doing the same thing. Which pin should I cover ?
I did some testing, with one ribbon it was pin 8, another TV was pin 9.
How do he know how much tape to cover?
What can I do if that model does Grey screen with dots like static
a very silent but useful video
Good job.
But may I know what was the main cause of this malfunction?
What is the function of the pins that you covered?
Is not there any way to fix the fault that is causing that malfunction in the first place?
I have the same question... But he can't explain maybe communication gap. We can get those answers by taking a Schematic for that Board, the pins will be explained in there
@@directsystems2225 36 / 5000
Výsledky překladu
I did the same on samsung TV
its the malfunctioning clock signal generator. blocking the malfunctioning clock signal may fix the issue.
Thanks a lot, it really worked 😊
Super Mit freundlichen Grüßen 👍 👍👍👍👍👍👍
Thx so much this is a great job!
usta turksen eger yazar misin niye o bolgeyi bantladin kac tane cizgi kapattin ve bunu nasil buldun istersen yaz ben ingilizcesini yazarim arkadaslara
How to identify exact pins samsung q60 led
do they work on OLED TVs?
Great fix well done
Can anyone please tell me fault that above TV has..
What is the main reason for those horizontal lines.
Plz can someone guide me
many thanks, sir.
how many lines you cover??
@@hollandsebazaar4545 thank you
How do you know it’s the right, not the left?
Just disconnect One at a time
Working bro i am from India❤
I only have 1 ribbon. Will it still work?
thank you, I did and it worked
How many strips does he cover.
it depends on the defect of the screen, there are TVs that require more lines to cover, there are TVs that require fewer lines to cover, you must try to be successful. even if you don't cover the lines correctly, nothing happens. the only way is to try
Thank you very much, it helped
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Very cool
Very good
Good to know.
Qoma nr e telefonit shoki ne cilin ven je ni radion me ja gjrt kodin ta kisha pru
Good job sir.
I like your videos but I can't understand your language can you please add an English translation or caption to your videos and thank you for the great work
the method didn't work. After that the panel was dark. TV is finally broken. I buy a new one. Greetings from Germany, the banana republic
How do you know which pins to cover
try to cover 4 lines. each time there are 4 lines until you reach the right lines that need to be covered
Интересно - сколько телевизоров будет восстановлено и сколько разбито после просмотра этого видео ...
I love this, please how can I see more of your post
Thanks 6o your vedeo, sir how many pin you cover sir
I thinking is 8...
Pershendetje ku gjedes edhe a ki naj numer tel .. flm
Supper👌👌👌
Nice sir
how do you knew that this lvds cable is broken
The culprit is not the cable but really the display itself, masking the defective connection shorted inside the glass will sometime resolve the problem
@@Yoritomo3800 what you say is correct
Had the EXACT same problem with my samsung UE55KS7000
didn't work for me
👍
looy ang cus2mer nimo bay hugaw kaau ka ug agi!!!
hello "french" je fait meme chose j ai un trait en haut de l écran : (
👍👍👍👍👍👍👍+++++