Hey, greetings from India. Would appreciate your help on few points. Does this ELM327 module allow to access all the features, if not, can I do proxy alignment on Fiat cars using a compatible cable using this application? To be very specific, i just want to calibrate my speedometer post a tire size upgrade which is off by approx. 4 mph(6.4kmph) and unfortunately I'm getting tickets for speeding
A few mechanics say that after this process, the calibration is not completed without stopping and starting on the road. Has anything changed after doing this?
For punto evo gearbox diagnostic is two choice of control unit. Marelli selespeed can cfc300 and cfc328. How can i to know wich is correct? Do you have any sugesstion?
There were several types of missions for my FIAT 500, and I didn’t know which one was suitable, so I tried all of them one by one. You’ll find the correct one if you check them all.
When I do it for my car the app says test successful without doing the test, I can't hear any noise of it switching from one to another. is it the app malfunctioning or is the problem with the car itself and what could it be? I can't drive the car in peace, the whole car shakes when I am on the first but then proceed to drives until I have to stop and it comes back.
You mentioned “GT Celespeed”, so you want to search information about alpha Romeo? For compatible models of alpha Romeo, please refer this video. ruclips.net/video/YOPCa74IPgw/видео.html
Hi there i try the alignment but instead of Neutral it makes reverse the neutral did i do something wrong the car was moving before and running nice but now i did this and in the dashboard it says its neutral but in the gear itself its on reverse can you help me please
Unfortunately, I wasn’t able to understand your situation. Judging from your comment, the problems you faced might’ve been caused by your car itself, not Alfaobd. I recommend you have your car checked in an auto repair and maintenance factory.
I was able to use AlfaOBD with my tool, “v 1.5”. “v 2.1” may not be available in AlfaOBD. I recommend that you check available tools on official website. ↓ www.alfaobd.com/index.html
Mate thankyou so much. You just saved me a heap of money I think. I appreciate it so much and would buy you a beer if I could. Cheers V
I’m glad to hear my video was of help to you.
Why don’t we drink beer together till dawn if we had any chances to do it!
👌👍
thank you🤩
We replaced clutch after that gearbox shaking car when gears go to 3 from 2 . Can this progress fix this.
I’m not sure replacing the clutch will fix the problem. When replacing the clutch, you’ll need to do clutch calibration.
Hey, greetings from India. Would appreciate your help on few points. Does this ELM327 module allow to access all the features, if not, can I do proxy alignment on Fiat cars using a compatible cable using this application? To be very specific, i just want to calibrate my speedometer post a tire size upgrade which is off by approx. 4 mph(6.4kmph) and unfortunately I'm getting tickets for speeding
sorry. I don't know how to configure that
Is this the same as an automatic transmission reset or adaptacion?
It’s not reset but calibration. You can adjust the tool to make it Criterion value
Hi thanks for sharing such a practical and informative video.How and where can I purchase this software many thanks
Rafiek
You can purchase it on Google Play
I put the selspeed gear to all the way up and then put it back is it because of this
Unfortunately, I wasn’t able to understand your question.
Could you tell me what you wanna ask me in detail?
A few mechanics say that after this process, the calibration is not completed without stopping and starting on the road. Has anything changed after doing this?
Calibrating corrects shift timing deviations
For punto evo gearbox diagnostic is two choice of control unit. Marelli selespeed can cfc300 and cfc328. How can i to know wich is correct? Do you have any sugesstion?
There were several types of missions for my FIAT 500, and I didn’t know which one was suitable, so I tried all of them one by one.
You’ll find the correct one if you check them all.
@@NORIZOUSAN thank you a lot (:
Because I am using a Lm337 with alphaobd and I can connect to Bluetooth but then not working to ECU
ELM327 v1.5 was able to connect via Bluetooth
When I do it for my car the app says test successful without doing the test, I can't hear any noise of it switching from one to another. is it the app malfunctioning or is the problem with the car itself and what could it be? I can't drive the car in peace, the whole car shakes when I am on the first but then proceed to drives until I have to stop and it comes back.
www.alfaobd.com/index.html
Hi, thank-you for sharing. Can you please help me find this obd11 and software. I would like to calibrate my GT celespeed. Thank-you very much.
You mentioned
“GT Celespeed”, so you want to search information about alpha Romeo?
For compatible models of alpha Romeo, please refer this video.
ruclips.net/video/YOPCa74IPgw/видео.html
Is it necessary to press the brake pedal during the calibration process?
You don’t need to press it during the process.
Hi there i try the alignment but instead of Neutral it makes reverse the neutral did i do something wrong the car was moving before and running nice but now i did this and in the dashboard it says its neutral but in the gear itself its on reverse can you help me please
Unfortunately, I wasn’t able to understand your situation.
Judging from your comment, the problems you faced might’ve been caused by your car itself, not Alfaobd.
I recommend you have your car checked in an auto repair and maintenance factory.
Are you talking about the gearbox lever ? does it show that you are on reverse while you are not
Hi, can this tool do a proxi alignment on fiat 500???
I have never done that operation. Maybe you need a dedicated cable to do proxy alignment.
Probably you can do proxy alignment if you use this cable.
www.amazon.com/MultiECUScan-FiatECUScan-Adapter-Diagnostic-Scanner/dp/B07PFK6YL2
Hi, can this tool do on Abarth 500 too?? What software are you using?
The software I used in this video was “alfa obd” and used it with my Android device.
You can use this software with your Abarth 500.
@@NORIZOUSAN Thanks
@@NORIZOUSAN Did you buy the full version?
I bought the full version
@@NORIZOUSAN Hi, when i go into the gearbox, it has many unit to choose cfc319, cfc328.......How can i know what unit my car is using? Thanks again!
Wich obd2 adapter are you using?
I use ELM327 V1.5 to connect to AlfaOBD with Bluetooth.
@@NORIZOUSAN I am using 2.1v and not working at all. It only connects to Bluetooth but when I press conect to Body computer or Engine, not working
I was able to use AlfaOBD with my tool, “v 1.5”.
“v 2.1” may not be available in AlfaOBD.
I recommend that you check available tools on official website.
↓
www.alfaobd.com/index.html
not working except first gear and reverse gear
www.alfaobd.com/index.html