Toyota Pickup Truck Cap/Camper Shell - What Fits?
HTML-код
- Опубликовано: 10 сен 2024
- The Clamps I used: amzn.to/2V7O8CD
The 84-88 and 89-95 beds are the same dimensions, so widen your search to cover all those years.
The Xtra Cabs have a 10 degree angle on the rear, while the standard cabs have a 4 degree angle. So a cap for a standard cab would have a gap if installed on an extra cab pickup and a cap designed for an extra cab, which is pretty rare, would hit the top of a standard cab when installed.
The 84-95 toyota bed is 60” wide by 76” long. The long bed pickups are 87” in length.
96-04 Tacomas got slightly bigger, but can still work on a toyota pickup US spec bed. US spec beds have wider flat bed rails compared to the import style beds, which have a thinner, rolled edge, giving a smaller mounting surface for a cap.
So when shopping for a used cap, forget about anything full-size, Or even midsize like the Dodge Dakota, Chevy Colorado, GMC Canyon… all of which are too big for our pickups.
The Ford Ranger is compatible… somewhat.
First gen 83-92 will work on long bed pickups. Second Gen 93-2011 is about 2” wider than the first gen, but the same 87” length, so they will be ok to fit a US long bed with the wider bed rails, but won’t sit well on the import beds with the rolled rails.
The standard bed first gen ranger is just over an inch shorter than the toyota pickup, but could still work. It would just have to be mounted a little further back to be flush on the tailgate end, which means there would be just over an inch of extra space between the cap and the toyota cab. Second gen ranger standard bed is almost an inch shorter than the pickups, but could also work in the same way. Just remember the second gen Ranger is 2” wider, so sitting on the rolled edge of the import toyota pickup bed could be sketchy compared to the US bed with the flat edge and thicker rails.
Now here’s where cab degree is important… Rangers all have a 7 degree cab angle, regardless of standard of extended cab. 7 degrees comes in right between the toyota’s 4 degree standard cab and the 10 degree extra cab. So the gap between a ranger cap and the toyota’s cab will be slightly off from top to bottom.
Next let’s talk about the Chevy S10 and GMC Sonoma.
The First generation of 82-93 trucks have the same 60” width, but come up about an inch and a half short of the toyota bed, but have the same 4 degree cab angle as the toyota standard cab, so a first gen S10 cap could work on standard cab toyotas with a little extra gap between the cap and cab.
The second generation S10/Sonoma beds are the same length as toyotas, at 76”. However, the second gens are all a 10° cab angle, regardless of the cab length. So these caps will only fit toyota Xtra cab standard bed… but there’s just one issue. Chevrolet slightly tapered the beds on the second gen S10/Sonoma, so it’s actually 62” wide at the cab and is 3” narrower at the back at 59”.
So it will fit an Xtracab standard bed, but after centering it up, the front will slightly hang over where it meets the cab, while the rear fits nice.
First and second generation S10/Sonoma long beds are like 7.5’ long, so they’re all out of the question for a long bed toyota.
Let’s talk about Nissan trucks… First, they all come in a 4° cab angle, regardless of it being a regular cab or a king cab, which makes these caps have a weird gap on a Toyota Xtra Cab. I couldn’t find any Nissans to measure, so here’s what I gathered from the internet:
83-86 regular cab nissans are 60” wide by 75” long, making them very compatible with std cab toyota pickups.
The face lifted 86.5 to 93 Regular cabs were a little larger, 60” wide by 76” long, making them a perfect match for a standard cab toyota.
The 82 and earlier Nissans were called Datsuns, and their beds were 60 x 76” for the standard bed, but the long beds were about 6” longer than the Toyota Long beds.
Although i can’t recall the last time I saw one on the road, We can’t forget about the Mazda B Series trucks. The 86-93 B series pickup’s 60x76” bed is the exact same as the toyota’s. The only thing I was unable to check is the cab angle. The standard cabs look to have little to no cab angle, while the extended cabs have a slight angle, but nothing close to the 10° of the toyota Xtra cab.
Mazda long beds are 7.5’ long, so their caps aren’t compatible with Toyota long beds.
I don't have Patreon or ask for donations but you can support the channel with some rad gear from my store: 6thgeargarage.c...
Follow Us:
Instagram: 6th_gear
6thGearGarage
Holy jumping shit balls This channel fuckin rocks. I’m so stoked I kept 88’ yota, not buying 50k new yota, I’m restoring me old one and I’ll do my best to find that high rise shell I had so much fun in.
I appreciate all the work that went into making this video. Great information for us Yota guys. Thanks. 👍🏼
pro tip: you can watch series on flixzone. I've been using it for watching a lot of movies recently.
@Liam Imran definitely, been using Flixzone for years myself :)
i just bought a 1989 long bed pick up and have spent the last 2 days searching for a camper shell and i am so thankful i came across this video you sir are a hero in my eyes lmao thank you
i am about to grab the same truck, what camper shells have you found so far?
ive been referring back to this video for so much over the past year (i camp in the back, looking for new camper tops or canopies, always need the measurements of my bed and constantly forget) -- just want to say thank you very much for all this information! you rock
Thanks for the good words! I'm glad this video helped so many people
Just a heads up - 89-95 Toyota pickup extended cab shells will fit the 84-88 years perfectly!
Almost all of your info is spot on-I've literally written the book on this stuff-well, blog anyway- important to note, the CabPlus B-series Mazdas (86 to 93) have a totally different bed than the standard cabs, and they're like a whole inch and a half shorter, the KingCab hardbody Nissans (86.5-97) are also slightly different than their standard cab versions, but not to the degree of the old Mazdas. Where I live on the west coast, extra cab Toys are way more common. I have an 87 B2000, and I have an old SnugTop from an 87 Nissan standard cab, fits great, I've also used tonneau covers on that old Mazda from 1st gen Tacos (95.5 to 04). The bed dimensions are almost spot on the same.
How do we find your blog? Would live to read it!
Was looking for dims for my bro’s 86 so I can build a bed(mattress)frame so he can sleep in back. Found exactly what I needed in this video
This will help out for my 94!!!! Thank you!!!!
There's nothing like a chart for makin it clear
This might have been the best RUclips video I’ve watched all year. I was hoping to find info about how compatible a Toyota truck tonneau cover would fit to a b2200 and this was perfect. Thank you
Glad it was helpful!
Again you are the Dolly llama of Toyota pickup. 🏆
Thank you!
You spent some time making this one! Good info!
Wow great video ,ive been looking for about 3 years for one for my 84 xtra ,at least now i know what to look for
This is amazing. Wish I have this video when I bought my cap. I ended up getting a green cap off an old s10 as well. Now I need to paint it... Next video maybe?
I planned on painting this cap red to match (I even bought the paint) but the fitment being a little off bugged me after a while. I ended up selling it to a S10 owner. If I ever find one that fits the truck perfect, I'll definitely paint it to match. If you're looking for a good paint tutorial, check out this video ruclips.net/video/qyIBWXXPjgU/видео.html It's a fender, but the same concept applies to a cap. You'll just have to mask off the windows.
Awesome thorough video!
After hanging through all this incredible detail, it seems if I want a properly fitting canopy for my 96 Tacoma extra cab, i need to pick up one specific to my truck, and be patient if going he used route.
Thanks for putting together and sharing this incredible video!
I just recently purchased a 96 xtracab. Were you able to find a bed cap?
@@randyvelasco9766I did not. I ended up purchasing a hard bed cover that hinges at the front.
@@richarde1355 oh nice, thanks for the reply
My Gramps literally cut a cap down the middle and added a few inches of fiberglass as a seam to adjust the width/fit of a cap when he replaced a f250 with a whole new f250 due to engine recall issues. Nevertheless he was able to fit a cap and repainted it looked perfect.
That's awesome! Fiberglass is a skill I want to master one day...
Great video man. Good answer to a question I've had for a while
Thank you!! I was just about to do this myself lol
Have a late 80's Toyota Long bed and finnally found one out in Az, .. BRAHMA Shell with raised roof. Two small cracks on the rear but fixable! Going to clean it up and paint it!
Just picked up a leer cap off a 2004 tundra model 100xl-tundc and it's almost a fitted match for my 1995 t100 ext cab sr5 if that helps anyone.
Good info! I didn't know any compatibility with the T100's
Super helpful. Excellent video. Thanks!
This is nice. I have a 1993 2-Wheel Drive Toyota, and it's getting hard to find these kind of parts for it.
Fantastic work. Thank you!
A those numbers made my head hurt. But thanks, I really want a tall one, like the Leer122.
Great educational video
Thank you!
Great video!👍🏼
Man looking for a used camper shell, for my 2014 TRD access cab. My head hurts, any suggestions would be greatly appreciated!!
Hi, the newer trucks are tough because there are so many specific sizes for different manufacturer configurations. Do you know the bed dimensions?
@@6thGearGarage No joke, seems they are all slightly different.
Not sure if I'm measuring right but outside edge to outside edge it's 76" long by 62" wide.
Thanks for responding
A ton of useful info in this vid. Well done.
Wow thank you for this! So helpful.
hello all , quick note .iam currently working in denver CO. ( COVID) and about to get my 84 Xtra painted so got off my butt on locating a shell for it again ,anyway there are a lot of shells for older toys here including a few toy only wrecking yards with them and quite a few on CL for standard and xtras . i dont know if the yards ship or not , price seems to run around $500 . i live in northern nevada normaly and there are no shells there ever as near as i could tell so thought id give a heads up if someone really wants one you may do a roadtrip to get one , BTW great video ,thanks again for making it
OMFG. I’ve been googling my ass off, looking on Amazon, eBay, Facebook Marketplace and every nook and crannie, and I only now just found this video? Thank you so fucking much! 🙏
Amazing Video! Extremely informative
Thank you!
Have you found a pass through seal that will work for these trucks/campers?
I have not found one, but haven't looked either.
80s Ford ranger cap on 85 standard cab long bed slight angle difference at the cab but does its job to keep dry
Got lucky and found one out past PHX on a truck just like my 88 single cab longbed...
I have a 91 extra cab but it doesn’t seems to not have a 10 degree angle it seems more like a 4 degree is that normal i
I know the 84-88 xtra cab are 10 ° but I haven't measured the 89-95 in person to see, but I think they are as well.
I'm currently looking for a topper that will work on a 97 Taco single cab. They seem to be hard to come by these days in my area.
I had 04 Tacoma single cab! Any suggestions for what cap would fit? Please lmk been looking
What are the dimensions of the bed on your 04?
Gracias por el video para los camper
i sure wish i could find a shell or cap for my 1977 sr5 long bed , ive been looking EVERYWHERE for a whole year now, i think im just going to have to settle for one that is a little long and ill have to cut it down to shorten it for size. oh well that might be cool actually beause i plan on turning the shell into a camping unit, one that can attach very easily that will hold everything i need while camping. like battery packs , solar panels , ac/heating , clean water , rain catcher , fold out stove top, fold out shower hose and mini privacy tent for said shower, im so excited for the buiild , gunna be alot of fiberglass and a ton of learning as you go .
I think I've only ever seen one or two toyota long bed caps for sale... very rare. I'm not even sure if the 78 & older beds are the same dimensions as the 79+ pickups. I never even knew pre-79 long beds existed, so that's a rare truck you have!
Very informative and helpful vid. Thanks!
Thanks for watching... had a lot of research into this one!
Does anyone know if this applies to 83 single cab as well? Short bed
Thanks man!
Nice work man
hey again just commenting to say I think I found one that would fit but still not sure this camper I'm interested will make a good fit, now since my bed is 60 wide x 76 long on my truck the camper that i'm interested is a bit new looking and modern but the measurements on the new one is about 59 and a quarter Wide and 76 long, do you think it could work??? as of now it's on a 2017 Toyota Tacoma but does not fit that truck well but I'm wondering if it would fit mine not sure but will see. i'm also wondering since the bed rail on mine is a bit skinny it's about 1/4 inches i'm not sure if it would make a good fit since the camper shell lip / ridge where it sits on the tacoma is a few inches wider or maybe I could try to put larger C clamps on it to make it fit??? I'm just not really sure and just wondering thanks this video has been a big help but I'm just wondering about the skinny bed rail / camper lip size ???
That's cutting it really close with the thin bed rails on these old Toyotas. Would the seller let you test fit to see if it would work? I think if you get it centered and clamped down tight, it might be ok.
@@6thGearGarage you were right I was cutting it very close lol in fact it was a perfect fit some how the clams worked on it and it made a nice fit on the bed the clamps are on there good and tight we drove home with it and it made it home I'm still gonna keep a eye on it if it needs tighten again but other wise it was a perfect match so I think it can work but hey thanks so much for helping me find a cap for my truck this video did help a lot to find one anyways stay safe I love my new cap :)
I have a camper shell 4Runner Style 6ft bed , short bed it does fit on American and Japanese style bed, the company that makes it is called Innovations Industries, Sunliner
George Cendejas hang on to that shell, there’s not many like that around anymore👍
also are the us spec beds and the import style beds the same size?
Yes they are, just slightly different design.
Beautiful video. But you forget isuzu hahaha😂
How could I forget Isuzu! I miss seeing them on the road...
Dude, this is one awesome channel! So glad I found this!
I have a question, I've been looking at a Toyota pickup (1986) and it has the 22r, how has your experience been with the carburetor? I'm just wondering if I should hold out to try and find one with EFI. Thanks!
22r/re are both great motors. The 22RE makes a little more power and might fetch a couple more mpg, but both are reliable. The biggest difference between carb and efi, is when something starts to go wrong on a carb motor, it will slowly start to run worse over time. On an efi motor, it can be running fine and then one morning BAM check engine light is on and it runs like crap because a sensor went bad. I wouldn't pass on a clean truck because it had either of those motors, but I'd look the other way if it has the 3.0 v6.
exactly what I wanted to know!
I have a 1996 toyota t100 regular cab and i really don’t know where to start. Need some help!
There's not much out there that will fit a T100 correctly. Tundra is the closest.
@@6thGearGarage So a first gen tundra! Thanks a lot!
been having a hard time finding one for 1982 long bed toyota P/U. currently have a Brahma shell but its damage at the passenger rear hatch bottom.
great info, thank you!
Excellent
Hey I have a 91 Toyota pickup extra cab. I found a shell that the lady says measure 91l 61w my truck is 87l 60w I was thinking the extra could be for cab angle so you think it will fit I have pics she doesn’t know what vehicle it came off
Is she measuring the length at the base? If so, it's a little too long and will hang over.
Thank you for this!!!
Can you help me with topper size for my 93 Toyota T100 long bed...
To find a top made for this truck is next to impossible...
Could you please give me options?
A cap from a first Gen Long Bed Tundra should fit. I don't know of any other options.
Thanks man. I’m looking at a cap for $35 this weekend. Guys says it’s clean, no issues at all. I have a 2010 TRD sport Tacoma. Cap is off of a 2001 s10. Hope it fits. I’ve been looking for a cap that I can afford for over a year. New caps are ridiculously expensive. Thanks for the info.
Hi , did it work ?
I have a 2013 Tacoma long bed , and I am also looking for a camper for a cross country trip
@@antoniopadilla2402 nope. It was for an earlier generation short bed. For all the good things to be said about the Toyota, this will n my last one. I do not care at all for the plastic bed and all the proprietary only things that I can’t add because they are stupid expensive. Every other truck I’ve ever owned from a Dodge Ram to a keep Comanche I could find a good cheap cap or ladder rack with no trouble at all for a very affordable price. The Toyota Tacoma is in my opinion just a large highway able utv
I have a camper shell that measured 74 inches long and 65 inches wide.
What size bed did it come off of?
I heard a tundra but not sure. And what size bed a regular or short or long please help.
Sorry, I don't know about the newer toyotas, I don't have any to measure off of.
I have a 1980 Long Bed, any suggestions for that?
I used to have a cap on my 1980 long bed. It was 60×87 with 4° cab angle, originally from a 1986 long bed standard cab and it fit well. So anything that will fit 84-88 long bed standard cab will fit 79-83 long bed.
@@6thGearGarage Thank you so much! I really appreciate the info!
94 Toyota standard cab. Bed measurements 60×76. What camper should I be looking for?
Same as 84-88, the video explains what can work best.
What about 79-83 ? Do You know what it fits? Thanks
Surry I have never owned a 79-83 to test fit anything.
@@6thGearGarage thanks for the fast response, if anyone knows the answear let me know
same question here
89 extended cab, I believe it's cap off of Mazda ... At least that's what I was told from the guy I bought it from
I have a Jeep Comanche longbox canopy on my 87 xtra cab long box import. The canopy as is, is an inch too long but there is a lip at the front that can be cut off that allows it to slide up and be even with the tailgate. The angle is around 4 ish degrees I think.
Do you know what may fit a 1st Gen (2003) Toyota Tacoma PreRunner SR5. I haven't measured the width yet but the length is 63.5" long.
I don't know for sure, but they're a little bigger than the 80's trucks that I have.
Would a 92 toyota pick up single cab camper shell fit on 96 tacoma xtra cab?
It wouldn't look good because there would be a gap behind the cab. Other than that the length will be same but Tacoma is about 1.5" wider. So depending on how much the cap hangs over on the 92 it could work on the 96.
@@6thGearGarage thank you for the advice
So for my standard cab short bed 94 pickup, a 96-04 tacoma bed cap will fit it?
Yes it will fit
That was a much needed video thanks a bunch. I was really hoping one would fit perfect on Xtra cab :( that hangovers to much for my ocd damn!
It bugged me too and I ended up selling it.
@@6thGearGarage im down to the point of trying my hand at a home made TRI fold tonneau, your videos are the most helpful on RUclips for my truck I have an 87' aswell, good work man! Im in the middle of completely remodeling my truck and trying out 3m's new 2080 wrap I'm lil worried bout trapping moisture but it's so cheap and effective any experience?
J V I did a spray on wrap a couple of years back, similar to plastidip, but never a traditional wrap.
@@6thGearGarage how did it go?
@@6thGearGarage do u know of any links to "grill retainer clips" for are 84-88' models? I've done a good bit of searching and orders only to get the wrong clips everytime even thoe clearly stated otherwise....?
I've got a 93 toyota standard pickup, looking at a camper shell that's on a 1995 Tacoma 1st gen. Do you think it will fit?
Tacoma is about 1" wider, same length though.
So, I’m having trouble finding info on this... would a ‘89 pickup cap fit my 2010 Tacoma? Seller says it’s for a 6 ft bed. Seems you guys have a lot more info and I am struggling to figure it out. Found the cap on craigslist and don’t want to make the drive out of town to find out it doesn’t fit.
6' bed is kind of a standard term for a regular size bed, even though they aren't all exactly 6' and can vary by an inch or so. Even if the length is close, I'm betting the width is not. 2010 Tacoma is a larger truck than the 84-95 pickup, so I bet the cap for a 2010 Taco is a little wider. I'd ask the seller to measure the width before I drive out to buy it.
Thanks man I’m going to get a Toyota and I want a shell I had no idea what to get tho
Very useful vid. Great job.
So what will fit my 94 Toyota 4x4 short bed
94 will use the same caps that fit the 84-88 short bed.
I just bought a S10 truck cap for my '86 SR5 and seems like the cap can't be installed with the universal clamps I have seen in the past. How did you attach this cap to the bed itself ?
The seller included 4 aluminum clamps that fit the cap. I don't know what brand they were though, sorry.
I have a '93 standard cab short bed, does that mean the mazdas and regular cab nissans will fit?
Yes, they should be the same dimensions
would an 87 4runner top fit an 84 toyota pickup long bed?
The width would be close but it would not attach well or seal well where it meets the cab
I was hoping you say something about a tacoma
Sorry just pre-96 Pickup. I dont have a tacoma to measure.
So do the 89-95 Ext Cab have the same 10 degree angle as my 88 ext cab?
Yes they do.
I'm probably gonna custom make one with a slated back to make it look like an AE86 back
That would be rad, never seen it done before.
Will a 1st gen Tacoma shell fit a '88 pickup? Both xtra-cabs
I've never fitted one in person, but I think it should.
Which brands of new caps will fit a 1989 short bed Toyota? Thanks!
I dont even know if companies make new caps for these old trucks. I checked ARE's site and they dont.
Any idea what beds would fit a 1st gen Tacoma crew cab bed?
Sorry I've never owned a Tacoma to compare, but I think that's going to be a tough one with the crew cab bed.
You mentioned the custom ones that area meant to look like 1st gen 4runners. Who makes those?
Innovator is one company that makes them ruclips.net/video/IKysNsmAlHM/видео.html
This is such a great video, thanks! What about attaching the camper to the truck bed? Let's see a video on that. I have a 99 Tacoma ex-cab and I'm searching for the proper clamps.
Here are the universal clamps I used amzn.to/2V7O8CD and I also put foam tape on the bottom edge of the cap to pad it so it wouldn't scratch my paint.
hi, i have a 1987 toyota pickup 4x4 standar cab with long bed, what camper fits on it??
ruclips.net/video/Js1JVOMmwU0/видео.html
So what can fit my 2000 toyota tacoma xtracab? the video was a little hard to follow along for me. i’ve been looking for months all around the internet for one of them tall caps with lots of windows on them.
iiKiNG I'm not sure about the newer Toyotas, as I don't have one to measure. Your bed is a little bigger than the 84-95. I'd measure your bed and cab angle to compare to the ones discuses in this video.
So if u have a standard cab longbed ur basically limited to the ford ranger
Don't forget about the proper cab angle if you want the best fitment.
I really am not liking my options haha so hard to find @@6thGearGarage
I have a 2003 Tundra with access cab. What will fit that?
I'm not sure, as I don't have one to measure from.
So what would be a perfect affordable cab for my toyota pick 1990 3vze extended king cab seat?
I'd look for a used one on marketplace or craigslist. I see them in the $50 to $200 range all the time.
@@6thGearGarage would a Ford f-150 be good for my truck that I described?
@@vegaf2011 no, it won’t fit. I explain everything that will/won’t fit in the video.
@@6thGearGarage yea idk why I still don’t get it lmao but thanks. Have a good one.
@@vegaf2011 You have the xtra cab, so the back wall has a 10° cab angle. 84-95 xtra cab will be a direct fit. Most other caps that fit will only have a 4° (nissan, mazda) or 7° if it comes from a Ranger. So they'll fit but have a gap at the cab. 94+ S10 had the 10° cab angle but the bed is tapered by a few inches from front to back, so it won't look perfect at the front edge. Those are your choices for xtra cab if you have to buy one from another truck that isn't an xtra cab. 96-04 Tacoma xtra cab is 1.5" wider but might still mount ok depending on the design of the cap where it meets the rails.
Is this for the tundra or tacoma?
This is for the pre-96 Pickup
what brand shell do you have?
This one is ARE
I have a gen 3 6foot bed will a 2000 s10 almost fit it doesn’t have to be perfect
I'd bring a tape measure to double check before you buy it, but it should be close enough.
I picked it up today it fits and looks good just the rear window needs to be messed with because there is like a hump in the middle of the tailgate but overall the width is just a inch short on each side and the clamps to hold it down need adjustment just like anything but not bad for 100 bucks
6th Gear Garage thanks for your video it helped a lot
So would a 99 Tacoma shell fit on my 85’ pickup cleanly??
std or extra cab?
@@6thGearGarage std
Do you have any info on 1979-1983 short and long beds?
Yeah, the 84 Regular Cab Short Bed is about 3" shorter than the 83. The 83 long bed is about 2" longer than the 84 long bed.
I regret selling the one off my Singlecab, but I use the bed too much to justify keeping it.
I sold mine too. It was nice to have, except when I needed it off to haul something big. If it fit 100% perfect, I would have painted it to match and rigged up a hoist in my garage, but not worth it on this cap.
Thanks for doing the research and then sharing. Had I watched your video before starting my search, I would have had a sweet shell by now. Oh well. Looking at a shell at the moment that came off a 97 extra cab (regular bed) for my 92 toyota pickup extra cab (regular bed). Has the gasket instead of window. Will it work? Thanks again for sharing.
I would measure to compare... I believe the Tacoma beds got slightly wider than the 84-95 Pickup bed. We're only talking an inch or 2, so you might be able to center it on your bed and make it work.
@@6thGearGarage Thanks for the info and thanks again for such a helpful video.
Do you know which toppers will fit a 1997 T100?
Sorry I do not, I don't know anyone around here with a T100 to measure the bed.
nice
This video is fantastic!! Thanks!! But it went by so quick it was hard for me to really retain what caps work. I have a 2008 Tacoma SR5. What non-Toyota truck caps would work on this truck?
I really only researched what's compatible on the 84-95. I never measured any of the newer ones because they are all larger and not compatible with the earlier Toyotas. Newer trucks are even more specific than earlier ones so there might not be many, if any other options.
I have a 1997 Toyota Tacoma xtra cab can someone please help me with options as for as a cab cover.I was also wanting to put a seat in the bed to Comfortably transport another passenger safely does anyone have any ideas pictures who had to do this?Thank you any help would be appreciated
I tried putting a toyota pickup bench seat in the bed of a toyota once, but it sat up way too high, and there were obviously no seatbelts. I only used it for driving around my property at slow speeds, never on the road.