In 8:37 u said Connect the wires from the output of the MCCB to the fuse. I don't see any wires connected to either the output or the input of the fuse.
"Hi, thank you for pointing this out! You're absolutely right. At 8:37, I mentioned connecting wires from the MCCB output terminal to the fuse. To clarify, the wires are connected to the output busbar of the MCCB, carrying R, Y, B, lines to the load, as shown in the video. These lines o the fuses can be connected anywhere within: CT meter box and Output of main MCCB Thank you for correcting me! I apologize for any confusion caused
"Thank you for your feedback! I'm glad you found the video helpful. Regarding your request for delta connection of a motor, I have covered star-delta connection in some of my other videos. Please check out my channel for those videos. If you have any issues understanding or need further clarification, feel free to ask and I'll be happy to help!"
Hi Damien! Installing your ADM 100 TC meter is straightforward. Begin by connecting L1, L2, L3, and L4/N to the incoming terminals. Remember to install a 4-pole 80 or 100A MCB beforehand. Then, connect L5, L6, L7, and L8/N to your distribution board or load. I'll be recording a video soon to guide you through the process step by step. Stay tuned for that!
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thanks. Diagrams were very helpful
You're welcome! I'm glad the diagrams were helpful for you.
If is possible send me drawing connection with CT(current transformer)
Thanks
@@mooketsidialwa2801 Thank you so much! I'm glad you found the video helpful.
In 8:37 u said Connect the wires from the output of the MCCB to the fuse. I don't see any wires connected to either the output or the input of the fuse.
"Hi, thank you for pointing this out! You're absolutely right. At 8:37, I mentioned connecting wires from the MCCB output terminal to the fuse.
To clarify, the wires are connected to the output busbar of the MCCB, carrying R, Y, B, lines to the load, as shown in the video.
These lines o the fuses can be connected anywhere within:
CT meter box and Output of main MCCB
Thank you for correcting me! I apologize for any confusion caused
Good thank you but would you send delta connection of moter
"Thank you for your feedback! I'm glad you found the video helpful. Regarding your request for delta connection of a motor, I have covered star-delta connection in some of my other videos. Please check out my channel for those videos. If you have any issues understanding or need further clarification, feel free to ask and I'll be happy to help!"
Ok,my name is Damien I have Energy meter type ADM 100 TC,HOW CAN I CONNECT IT
Hi Damien! Installing your ADM 100 TC meter is straightforward. Begin by connecting L1, L2, L3, and L4/N to the incoming terminals. Remember to install a 4-pole 80 or 100A MCB beforehand. Then, connect L5, L6, L7, and L8/N to your distribution board or load. I'll be recording a video soon to guide you through the process step by step. Stay tuned for that!