Lunos e² Installation Guide (Controller 5/UNI-FR No.40269)
HTML-код
- Опубликовано: 15 июл 2024
- This is the installation guide for the Lunos e² and e²60 heat recovery ventilation systems from 475 High Performance Building Supply. The Lunos e² and e²60 are ductless, simple, and highly efficient heat recovery ventilation (HRV) systems. Operating in pairs of 2 or 4, they are installed directly in exterior walls. Consult directions included in your order. Depending on your order, the contents of your box may vary.
NOTE: any work involving live wires should be done with the utmost precaution. Breakers should be turned off at the electrical box and work should be done under the supervision of a licensed, professional electrician.
---
THIS IS THE INSTALLATION GUIDE FOR LUNOS SYSTEMS PURCHASED AFTER APRIL 2022. IF YOUR SYSTEM WAS PURCHASED BEFORE APRIL 2022 AND ARRIVED WITH Controller 5/UNI No.39975, SEE THE FOLLOWING GUIDE: • Lunos e² Installation ...
Please contact us through our website with any technical questions:
foursevenfive.com/support/
See the Lunos product pages for further installation guidance:
475.supply/collections/lunos
(AVAILABLE ONLY IN USA)
00:00 - Intro and System Overview
01:52 - Preparation and Checklist
03:32 - Tube Installation
05:43 - Transformer and Controller Installation
09:15 - Switch Installation
11:56 - Interior Cover Installation
12:48 - Exterior Grill Installation
13:23 - Fan Operation 
Наука
Standard, short, and me, your biggest fan
You're too kind. Thank you.
Nice instructional video, fellas! Surprised we haven't been seeing more of these systems yet in the SF Bay Area.
Such a helpful video!
Very good step by step video, especially for the electrical part. I still have a question: I have the lunos smart confort 5/SC-FT control panel for my e2 FR unit. There is what seems like switch wire on the control unit (a red, black and grey wire), but in my mind i don't need a switch since i have the control panel. Are these obsolete? Do i need them?
And then when the drywall boys show up they rotozip right through that wire that was only cut into a small notch. Happened to me. Can't control all the trades so why not cut the wire back the thickness of the drywall?
Can someone TELL me, i have completely different panel, HOW TO SET MANUALLY some things? I mean constant INTENSIVE ventilation for example? I hold the button for 3 seconds and what ?
We're happy to help, and have guidance if you are in the USA. If you are not in the USA, you should reach out to your regional dealer. USA settings and instructions can all be found on the product page here: 475.supply/products/lunos-e-kit Please look in the Reference Downloads and Related Blogposts section. You'll find everything you will need to know about installation and operation within the United States.
Is there a way for these to work with a 12V supply?
Yes, Lunos systems actually work on 12v power supply. That is why each kit comes with a transformer to convert from 110 power supply, it need to step down to 12v. So to operate with 12v you would simply not install the transformer. You would, however, need to ensure steady, consistent 12v was being supplied to the units and ensure proper wiring.