i have made my rx100 to rx125 installed rx135g Carburettor and performance is superb and smooth. DO I HAVE TO CHANGE REED VALVE TOO FROM RX100 TO RX135 REED VALVE. ? AND WILL I GET BETTER PERFORMANCE IF I INSTALLED RXZ 4SPEED EXHAUST. ON SAME BIKE ? sorry two many questions.
Not like that, if the rred valve petels are opened means the combustion is not gud and the fuel will not burn correctly so there will be starting trouble amd idling problem and pickup issue ,
So there will be no issue if I change it to new one also?? Cause my mechanic was saying that it has to be changed only if needed....but I also feel that my bike missing problem may improve if I change this to new one
@@TheWess450 just remove the reed and look inside the reed valve holes , if you see any light means the reed petals are gone , if there is no light passing inside the reed holes means the reeds are gud in condition
Bro i converted my rx100 to rx135 change cyilander, head, carb, magenet, coil,cluch and add power box but less pik up and 25 km milage only can i need to change reedvalve
One of the best information in RUclips. Bro one doubt, Shogun reed valve petals too have different thickness?
Can we use Rx135 reed valve in Rx100? Reed valve is same for both Rx135 4spd & 5spd?
Bro which is good hta or orginal. Because orginal I bought for 1490 but hta is very cheep
HTA packing reed valve comes for rx100 only. For rx135, original only available, use original for rx135.
Shogun reed valve can be use in rx135
Yes, it will improve power
From where can we get the reedvalve for rx135 5speed. Is it same for 4 speed n 5 speed?
4 speed and 5 speed have same reedvalve, buy it from yamaha showroom.
i have made my rx100 to rx125 installed rx135g Carburettor and performance is superb and smooth.
DO I HAVE TO CHANGE REED VALVE TOO FROM RX100 TO RX135 REED VALVE. ?
AND WILL I GET BETTER PERFORMANCE IF I INSTALLED RXZ 4SPEED EXHAUST. ON SAME BIKE ?
sorry two many questions.
You just try the rx135 reed valve, by changing rxz silencer, no difference in performane.
Please make a video for fitting fuel meter in RX100 or RX135
It's original
what is the advantage of replacing with a new reed valve??higher mileage and power?? good tuning??
Not like that, if the rred valve petels are opened means the combustion is not gud and the fuel will not burn correctly so there will be starting trouble amd idling problem and pickup issue ,
@@VISHNUGAMER oh ok 👍
So there will be no issue if I change it to new one also?? Cause my mechanic was saying that it has to be changed only if needed....but I also feel that my bike missing problem may improve if I change this to new one
@@TheWess450 just remove the reed and look inside the reed valve holes , if you see any light means the reed petals are gone , if there is no light passing inside the reed holes means the reeds are gud in condition
Oh ok bro....I'll check tomorrow👍👍
Bro i converted my rx100 to rx135 change cyilander, head, carb, magenet, coil,cluch and add power box but less pik up and 25 km milage only can i need to change reedvalve
yes, try that also.
M useing mAt read valve in my rx135... What kind of problums can I face?
Bike may jerk, tuning problem.
Thanks sir ..is reed valve is still available in show room..
yes.
Is any diffence between rx100 nd 135 read vlve??
yes, both are different, rx135 have softer plade to allow more air to cylinder.
rx100 reed valve have harder plates.
@@rxtuningpoint2270 any difrance in size?
@@twostrokworld3621 no size difference, the plade are different.
What happen if i put rx135 5speed reed valve in rx100
Kahan Milega bhai
Bhai ketne me mela
Price bro
HTA make around 400, OE packing 600.
Bad reed valve can make low mileage on rx100
Duplicate
What is duplicate?
Bhai number send kro