Thank you so much sir! Im the corded version wires and sensor are accessible from the back in slightly different locations. Was able to confirm the sensor was drenched. Fixed the problem anyhow.
Just tried this and it worked! Thank you! We got shark to send us basically a whole new unit for $15. So it is going to stay in the box now until something else breaks kn this one! Lol
Hi, Jamie, As soon as I listed the comment, I went and made sure the molex connector that the red, black and red were connects to were make good contact. I unplugged it and pressed it back on real hard because the connector doesn't snap on real good. If it happens again, thing I will solder the yellow and black male pins that the connector slides on together. That will delete that anyway from happening again. Thanks
Hi, I appreciate the video , I cut the yellow and black wire and it work just fine,but the next time I used it the blue light came back on and then went back cutting off and blue light started flashing. I went back and cut the red wire which did not help. I was hoping you might know what else I can do? Thanks
Hola amigo, yo tengo una 3 en 1, WD 101, pero parpadean en rojo el simbolo de agua y alfombra al mismo tiempo, el manual indica que el cepillo giratorio está atascado, ya desarmé y está todo bien, solo gira por 3 segundos y para, sabrás algunas solución? te agradecería bastante, gracias.
Thank you!!! I just fixed my daughter's machine...thanks to u and THIS VIDEO!!!!
Thank you so much sir! Im the corded version wires and sensor are accessible from the back in slightly different locations. Was able to confirm the sensor was drenched. Fixed the problem anyhow.
Just tried this and it worked! Thank you! We got shark to send us basically a whole new unit for $15. So it is going to stay in the box now until something else breaks kn this one! Lol
Got one new out of the box with this error, gonna go get money back... Thanks for the video
I applied this to a newer purple model and so far so good thanks!
Hi, Jamie, As soon as I listed the comment, I went and made sure the molex connector that the red, black and red were connects to were make good contact. I unplugged it and pressed it back on real hard because the connector doesn't snap on real good. If it happens again, thing I will solder the yellow and black male pins that the connector slides on together. That will delete that anyway from happening again. Thanks
You rock!! It worked,so happy to have my shark back!
Worked. I took two back to the store every time this happened and got a new one. Same thing happened
Worked great, thank you so much.
THANKS! took about 10 minutes
Much appreciated good sir! 🎩 off to you!
great explanation man, i really appreciate it!.
Thanks for the video really helpful I follow this video and mine is working good 👍
Whit the small screw driver. Look for small hole on the bottom of the handle push in and pull at the same time...!
Hi, I appreciate the video , I cut the yellow and black wire and it work just fine,but the next time I used it the blue light came back on and then went back cutting off and blue light started flashing. I went back and cut the red wire which did not help. I was hoping you might know what else I can do? Thanks
So you only cut black and yellow cables? And connect those two together? What do you do with the red?
Just don't cut it...
Also check the video on the minute 2:42 and you can see that little hole...
How do you remove the handle ?
Hola amigo, yo tengo una 3 en 1, WD 101, pero parpadean en rojo el simbolo de agua y alfombra al mismo tiempo, el manual indica que el cepillo giratorio está atascado, ya desarmé y está todo bien, solo gira por 3 segundos y para, sabrás algunas solución? te agradecería bastante, gracias.
They installed security bolts on the newer model, need to get the girls with the hole in the middle.
I was able to use a standard star bit.