Figuring Out the AC in a Modern Engine Swapped Foxbody - Episode 42
HTML-код
- Опубликовано: 5 июл 2024
- EgoBruise's 2.3L EcoBoost gets AC lines made and ran. How. Where. What. Why. The AC puzzle for EgoBruise is figured out and were just another step closer. All this, while still trying to hide the system, and make it as clean as I can. This could benefit any modern engine swapped fox builds! Coyote, Godzilla, EcoBoost, etc...This video took a while and a ton of footage to dial in. This is also the first video made using a Sony Camera and ditched the GoPros. Parts list below:
Compressor:
Standard EcoBoost 2.3L 2015
Condenser
1993 Mustang R134a: lmr.com/item/LRS-19712A/82-93...
Evaporator
1993 Mustang (spacer built to fit HVAC Box) R134a: lmr.com/item/LRS-19860B/87-93...
Accumulator
1997 Ford Probe - www.rockauto.com/en/moreinfo....
Accumulator Clutch Switch
1997 Ford Probe - Wired to 1979 AC Thermal Clutch Switch
Lines:
Universal Hose and adapter kit coldhose.com coldhose.com/collections/univ...
Orifice Tube Liquid line from Condenser to Evaporator: lmr.com/item/LRS-19835DR/1987...
Aluminum Hard Line #10 30in: www.summitracing.com/parts/VT...
#10 Aluminum Line Tube Bender: www.amazon.com/dp/B0C1NFB4DC?...
Adapters:
45 Degree #10 O-ring Beadlock: coldhose.com/products/10-45-d...
90 Degree #10 O-ring beadlock:
coldhose.com/products/10-90-d...
135 Degree #10 O-Ring Beadlock: coldhose.com/products/10-135-...
45 Degree #8 Female Springlock: coldhose.com/products/8-45-de...
Compressor Godzilla/Coyote Adapters: coldhose.com/products/2016-20... Кино
That's great! AC is definitely not my cup of Tea! I have to install from scratch from mine.! Glad your putting out the vids!
Same buddy. Not mine either. But being cool is important when your 44 years old here in the summer time lol .
Nice work. Way to stick with it and figure it out. All part of doing something totally custom. Can't wait to see it all wrapped up. I think it's gonna be an awesome piece of work.
Thank you. And, yessir its part of it. Its what I was wanting, so this built has not disappointed. I really enjoy the research and details in things like this.
I commented earlier but it didn’t post it oh well. But this video definitely is going to help me with my swap and adding ac to my car! Lots of good info here
Thank you man. Much appreciate the comment.
As always great video Mike. Your tubing bending skills are really good for a first timer brother! Congrats!
Thanks! Ive done brake lines, but I mean that was 10 years or so ago, brake lines are a little easier to work with
Nice clean work man! Great video as always.
Thank you!
Definitely coming along.
One of your best videos ever
I really appreciate that! This one took time.
Another great video with a lot of good information and how to. Thank you!
Yessir!
Omg aawho would have thought AC systems are a lot of work? Not me. Lol great job seeing it thru!
lol thank you. Yeah a little more to it, but still once you figure it out its easy.
Can’t wait for the next video
Should be today!
I think fatfenders garage ac kit would have been a one stop shop. That is the kit I plan on running. Still an awesome job figuring it out yourself.
Never heard of it but checked it out…looks to me like all truck stuff but their universal kit is the same as coldhose imo. Basic fittings and a drier, like most ask universal kits i saw. But if i missed something let me know! I’d be curious to see if ask this could have been easier, again yet to find a universal kit that worked with a foxbody orifice tube system and came with a universal accumulator.
@HOUSEOFDULA I have the wrong company, it is fathead garage. Their kits are amazing. The kit is for a coyote swap but you can pick what compressor you are using and I don't know much about the Ecoboost but I'm willing to bet
they are the same or easily swapped to a different compressor.
@@4eyefox THERE we go! That does look nice. Dang. Yeah nice stuff! That would have worked too, I guess I went the cheaper DIY route ;)
Man you made that look so easy!
Nice job Mike! Very OEM looking install!
Thank you sir!
Mike,
Good job. I’ve always wondered if the whole system could be converted to a Vintage Air Gen IV system, the evaporator/heater box under the dash, like I installed in my 66 Fairlane. Never seen one so I guess not.
Glad you marked the orientation of the hose in the fitting or you would play hell to assemble it.
Charlie
Yessir! THe video frankly as usual was just way too long, so I didnt film crimping it
Mike ,
Just out, Vintage Air introduced at SEMA a complete AC kit for the Foxbody.
@@charleschurilla3629Man no kidding?? A little too late for me, but Checking it out
Excellent video, very informative, lot's of good detail info! Well done sir.
Thank you!
Great info. I am also looking to upgrade my 79 to a newer ac, still will be a 5.0 Windsor car.
Sweet. Then hopefully this helps you out.
Great video lots of good info Thank you
Yessir. I try to share what little I know ;)
Good Job Dula!🤠👍
Thank you!
Nice job. The car you got the motor out of was a 93 GT and it is a 347.
Negative. Its not a stroker.
This is what I’ve been waiting for!!! Hey do you know if your setup would work with SN95 a/c setup??
I honestly am not familiar with the Sn95, but as close as they are to a fox, and still a fox platform, Id be willing to bet it would be very similar if not exactly the same.
How do you plan on doing wiring? I also have a Ford racing control pack with no ac provision and stock wiring has been removed.
That will be covered in an upcoming video. You need to use the stock AC wiring, or at least I am. I'm integrating the pressure switch and clutch switch into the '79 factory AC wiring, its really one wire loop from the VAC Panel. The one thing that wont happen, and I still have no idea around, is to "tell" the ford control pack the AC is on to idle up. Im assuming that the ford control pack ECU's idle and drive strategy will just see the extra load from the compressor and be fine. But Im not certain yet. Going to be one of those things that will just play by ear once the car is running. The Fans, I wont be able to use stright from the ford control pack. The control pack harness will trigger a relay to kick the fans on, the AC on wire will also trigger that same relay. Would make life easier if Ford included an AC trigger input from the control pack to tell when the AC was on.
There is someone called 'fathead garage' that sells ac wiring kits for mustangs with these swaps. You can chose either Holly or Ford racing control pack and whichever compressor you have. It has all the relays/WOT cutoff/ Fan relays all wired up for you. But it is expensive at $300. Might be worth checking out.@@HOUSEOFDULA
looked at many, many mvac systems. never seen charge ports on the compressor like that. not saying it's wrong its just that no o.e. design system that I've seen is laid out that way
It's was an '89 GT. RUclips won't let you put your email address in the comments.
BOOM WINNER WINNER CHICKEN DINNER. Shoot me an email prisonplanet88@gmail.com
87 white gt
Negative.