Good day ! Very good video! I didn't understand why you put a cloth on it at minute 1:47? What fabric is it? Cotton or synthetic and for what? Thank you !
Hello, you will find a link with 4 screenshots. This will show you in a simple way how to prepare the print from Photoshop : drive.google.com/drive/folders/1wRApEmW_Qook5gIhJznKxyPDf_Cjclrw?usp=sharing
Hello, this is first printed on a transfer paper with sublimation ink. Then the printed sheet is placed on a Chromaluxe aluminum plate (which is coated with a polyester varnish). Everything is pressed at a precise temperature and at an equally precise pressure. I hope that answers your question ?
Hi, It depends on the number of impressions ;) It's complicated to have an idea. Each time it starts, the printer cycles (to prevent clogging of the heads). You should not wait until the level is at its lowest to fill.
@@mrSanders. I have a preference for the Canon environment (but there is no Canon sublimation printer) The result after sublimation remains superb. That's what matters :)
@@Oliov1 I fill up with ink as I go so that I never have a level that is too low. An imprecise estimate makes me think that it takes rather two complete sets for 30m of paper.
@@yannick.pilon58 thanks, can you please help me with the setting I should make after I select print from photoshop? ( document profile, printer profile etc, color mode, etc)
@@stefficm Hello, you will find a link with 4 screenshots. This will show you in a simple way how to prepare the print from Photoshop : drive.google.com/drive/folders/1wRApEmW_Qook5gIhJznKxyPDf_Cjclrw?usp=sharing
Bonjour, je ne connais pas particulièrement ce type d'attache, mais si le principe est magnétique cela ne fonctionnera pas. Les plaques sont en aluminium donc non ferreux.
Bonjour, pour trouver les plaques, il suffit de faire une requête dans Google. Pour la dimension des plus grandes plaques dans cette vidéo il s’agit d'un 24 x 36 cm (la presse permet de réaliser des 60 x80 cm) Vous pouvez aussi voir des réalisations en 40x 60 cm sur la page de mon site : medialti.com/sublimation.html.
Buenos dias, Necesita encontrar un proveedor de planchas Chromaluxe. Luego calcule su inversión (impresora, prensa de calor, consumibles, software, etc.). Tienes que tener en cuenta la vida útil de cada elemento y luego adoptar un coeficiente que, dependiendo del volumen de ventas estimado, te permita rentabilizar tu inversión y potencialmente poder ganar dinero. ;)
Good day !
Very good video!
I didn't understand why you put a cloth on it at minute 1:47?
What fabric is it? Cotton or synthetic and for what? Thank you !
Hello, it is simply a polyester fabric that is placed over the protective paper to absorb residual moisture.
very good day
@@medialti58 Thanks for the answer, but the humidity of what element? Does aluminum have moisture?
Hello, you use mode of rendu to Perceptual or Relative Colormetric? Thank you!
Hello, you will find a link with 4 screenshots. This will show you in a simple way how to prepare the print from Photoshop : drive.google.com/drive/folders/1wRApEmW_Qook5gIhJznKxyPDf_Cjclrw?usp=sharing
Hello is this metal or ceramic printed on...thanks
Hello, this is first printed on a transfer paper with sublimation ink. Then the printed sheet is placed on a Chromaluxe aluminum plate (which is coated with a polyester varnish).
Everything is pressed at a precise temperature and at an equally precise pressure.
I hope that answers your question ?
One question we’re do you buy that chroma???
Hello,
There are several Chromaluxe suppliers in France. You have to be a professional and just do a google search ;)
Any info on machine and printer? And also ink that you are using
Hello,
The printer is an Epson SC-F500. Original T49 series ink cartridge...
The press is a pneumatic SEFA 865 which can sublimate 60 x 80 cm plates.
@@medialti58 thank you, and how much does it cost ? both machines ? please
@@jeremyduff5934 Hello, it takes about 15000€ for the press, the printer, and the compressor.
Hi. How long does one printer refill last?
Hi, It depends on the number of impressions ;)
It's complicated to have an idea. Each time it starts, the printer cycles (to prevent clogging of the heads). You should not wait until the level is at its lowest to fill.
@@yannick.pilon58 What is your model of this printer?
@@mrSanders. This is the SC-F500 model (special sublimation).
@@yannick.pilon58 yes, I saw the model name. meant do you like how it works, print quality
@@mrSanders. I have a preference for the Canon environment (but there is no Canon sublimation printer)
The result after sublimation remains superb. That's what matters :)
how many sheets can I print with a set of 140ml inks? approximately. Thank you!
I'm sorry, I have no idea, I'm printing in a roll.
@@medialti58 with the 30m roll from Epson, after you finish it, the inks is also consumed?
@@Oliov1 I fill up with ink as I go so that I never have a level that is too low.
An imprecise estimate makes me think that it takes rather two complete sets for 30m of paper.
Hello, please can you tell me what program do you use for printing?
Hello,
I just use photoshop.
@@yannick.pilon58 thanks, can you please help me with the setting I should make after I select print from photoshop? ( document profile, printer profile etc, color mode, etc)
@@stefficm Hello, you will find a link with 4 screenshots. This will show you in a simple way how to prepare the print from Photoshop : drive.google.com/drive/folders/1wRApEmW_Qook5gIhJznKxyPDf_Cjclrw?usp=sharing
Hello,
Did I answer your question?
@@yannick.pilon58 Hello, you use mode of rendu to Perceptual or Relative Colormetric? Thank you!
Bonjour, est ce qu'il est possible d'utiliser un aimant faisant office de support mural ? (Comme le fait très bien Displate)
Bonjour, je ne connais pas particulièrement ce type d'attache, mais si le principe est magnétique cela ne fonctionnera pas. Les plaques sont en aluminium donc non ferreux.
what paper do you use for sublimation?
hello, I use Epson DS Transfer General Purpose paper.
@@yannick.pilon58 DS Transfer General Purpose with the weight of 87gr/sqm or 105gr/sqm?
@@Oliov1 It's 87gr/sqm.
@@yannick.pilon58 thank you!
Bonjour,la plaque quel épaisseur ,merci
Bonjour, elle fait 1,14 mm d'épaisseur.
Bonjour, j'aimerais savoir où est ce que vous avez acheté votre plaque chormalux et quelle est la taille du grand tableau ?
Bonjour, pour trouver les plaques, il suffit de faire une requête dans Google. Pour la dimension des plus grandes plaques dans cette vidéo il s’agit d'un 24 x 36 cm (la presse permet de réaliser des 60 x80 cm) Vous pouvez aussi voir des réalisations en 40x 60 cm sur la page de mon site : medialti.com/sublimation.html.
Hola, ¿Cuánto de cuesta el producto y cómo calculas a cuanto lo debes de vender?
Gracias
Buenos dias,
Necesita encontrar un proveedor de planchas Chromaluxe. Luego calcule su inversión (impresora, prensa de calor, consumibles, software, etc.). Tienes que tener en cuenta la vida útil de cada elemento y luego adoptar un coeficiente que, dependiendo del volumen de ventas estimado, te permita rentabilizar tu inversión y potencialmente poder ganar dinero. ;)
Salut comment vous contacter s'il vous plaît ?
Bonjour, vous pouvez me contacter par mail à l'adresse suivante : contact@medialti.com
Which aluminium sheet do you use?
Hello, I use Chromaluxe brand plates.