Disassemble impulse sealer replace heater element wire telfon belt
HTML-код
- Опубликовано: 9 фев 2025
- Video Guide replace impulse sealer heater element heating wire teflon tape for PFS-200 PFS-300
Thank You for watching
If you like this video, please
Leave a LIKE, Comment, Share & Subscribe:
bit.ly/2AG0uW0
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
Replacement Kit For 4" Impulse Sealer 2mm Sealing Width (6 Kits)
amzn.to/30Z3Op2 (affiliate link)
Metronic 8 inch Impulse Bag Sealer Poly Bag Sealing Machine Heat Seal Closer with Repair Kit
amzn.to/32T0kqA (affiliate link)
Konmee 12 inches Impulse Manual Hand Bag Sealer Heat Sealing Machine for Mylar and Cereal Bags Plastics Bags Polythene with Extra Replacement Element Grip
amzn.to/38np0bQ (affiliate link)
Yescom 20" 500mm Impulse Manual Hand Sealer Heat Sealing Machine Poly Tubing Plastic Bag amzn.to/2PPHZoR (affiliate link)
Thanks for the vid! Mine was a little bit different but this helped so much!!!! Where would we be without people like you! Thanks a MILLION!!!!
Thanks for your comments and Thanks for watching.
Thank you, just what I needed to see this morning!
You are so welcome!. Thanks for watching ! ❤
I just changed mine on the sealer I have by watching this video with help from my youngest son. Thanks so much for sharing this video
Glad to hear that Your Smart youngest son found this video to help you solve your problem. I am proud on you.
Really helped me a lot,without buying a new one
Glad it helped. Thank YOU
Thank you so much for this!!! I guess I’m not mechanically inclined and I couldn’t figure out how to keep the Teflon strip in place. I had wrapped it around the metal strip and it kept slipping off. I just wish I’d googled this sooner. But thanks so much!!
Great vdo and great machine… I had to replace my heating element yesterday..
Thank You
Very helpful video .
Can you tell me if i can install 2mm or 3mm elements in 12" sealing machine. Present element width is 1.5mm.
Thanks alot nice video..😊😊😉 good job
Most welcome 😊
thank u for this❤
Thanks. I was hoping it wasn't that much work. Managed it though. Scissors tip can work if you don't have ascrewdriver.
Great! Thank You
This is hilarious
Scissor tip, or a sharp knife works really well too. If I can't find either of those I use the site on my handgun.
Thanks for this video.. 🙏
Most welcome 😊 Thank You
Thanks for the video. Mine isn't the elements nor the teflon but the flat iron placed between the teflon and the element. My kid brother misplaced it after i had loosened the sealer to replace the teflon. Before I could return to the spot, head misplaced it. I've searched for it, to no avail. Do you have any idea on who to take it to for replacement or where I can buy it from. I don't even know the name of the material so that I can call it buy name. I've not been using my machine for years now because of that. Any help please, I'll appreciate
Thank you very much for the wonderful video 🙏🙏🙏🙏🙏
Most welcome 😊 Thank you very much.
May I asked what is the brown paper liked thing on the hearting element
It is Telfon belt. when you purchase new heater element . it come together with it.
Thank you bro this video is very use ful
whats the green color strip ? and why is it used ?
Thank you so much ❤️
You’re welcome 😊
Thank you! Helped me replace mine
Thanks for Watching ❤️❤️❤️❤️❤️❤️❤️❤️
Whats the widest bag you can see with this model?
How do you actually measure the heating element to be replaced. I have a PFS Plastic Film Sealer 16.5 long and I measure from eyelet to eyelet and it's 14" long measuring from the length of the teflon only end to end is 13", I ordered a 12" and no way does it fit and a 16" is big. How do I find the right elements ? ULINE has only 8, 12, 16.
one more question : when i press down the handle, the light go ON and OFF right away.Do you know what happen. Thanks again.
you should turn the heat control knob. that may help
Nice
Thanks
Thanks, for the vid, I tried it but after replacing the heating element it's still not working for some reason as in no heat at all!!
Unplug the power cable first, then open the bottom case, Actually it is a simple circuit. check got any wire loose connection or the power cable broken cause no AC voltage supply. if you know how to use the voltmeter, you can check the ac voltage coming in or not. If everything is nothing wrong, come to the big transformer, then we can't do anything. just buy new sealer.
@@AndrewSME ok thanks will try it and get back to you
@@AndrewSME Hi I opened as you suggested but can't seem to find something wrong are you on Facebook Would like to send you a few pictures so you can access it please....many than Andrew
Hello may chance paba maayos Yung sealer KO , may pumutok Kasi sa loob. Pero Hindi Naman moy sunog . Sana masagot . Thank you in advance ☺️
When do we need to change the heating element?
When the heating element broken then we change it. Will be used for a long time, if we use it properly. Thanks for watching.💗
Hi. Our local shops doesn't have this heater element. Can I solder mine instead?
Where can I buy that sealer heater element?
You can buy it from your local country Online marketplace. In the description and there is a Amazon affiliate link for Amazon USA. Thanks for watching. 🌹💗
Fantastic work man 😘
Thank You For Watching.
Mere pas bhi h ak machine jo usme lait bhi aa rha but ki o marm nhi ho rha h
where did you buy the HEATING ELEMENT of this sealer. thank you very much .
If u buy heating element for the sealer I will provide you best quality and best price Contact no. 9650766039
DIY shop
how long does one last?
Bruh I used a uline Element wire tefflon on a Taiwanese impulse sealer the shit blew up luckily I’m not injured my fault 🤦🏾♂️
I have that same one
I just changed mine and it broke after first try I was wondered why that would happen
Where| do buy it?
I tried to increase the number (1,2,3....8)back and forth but the result still the same
New element is burnt in 2 seconds again and again what is the reason......?
Thnks dear...
Thanks for watching. ❤️❤️❤️❤️❤️❤️❤️❤️
Sir iska eliment kitne watt ka hota h
Coil jaada heat Ho raho hae kya kare
How much wide is this teplon tape?
is about 3.1 cm.
I am Chaging ok But Nat Packing How to Check Video link Sand ME Pleß
Watch 3:13 to check is it working after changing the heater element. Thanks for watching. ❤️❤️❤️❤️❤️❤️❤️❤️
Dabal packing coile milate ka
Fuse kaise replace kare
Never buy this . they dont have onsite repair . I had my last day of warranty left . they refused to replace . never buy
Right
Seal gram nhi hota
mujh bhi chye
Ihelpphul
Thanks for watching. Thanks for watching.💗
Never buy this . they dont have onsite repair . I had my last day of warranty left . they refused to replace . never buy
mujh bhi chye
Never buy this . they dont have onsite repair . I had my last day of warranty left . they refused to replace . never buy
Never buy this . they dont have onsite repair . I had my last day of warranty left . they refused to replace . never buy
Never buy this . they dont have onsite repair . I had my last day of warranty left . they refused to replace . never buy
Never buy this . they dont have onsite repair . I had my last day of warranty left . they refused to replace . never buy