साजिर भाई जैसे हम लोग इंजन आयल चेंज करवाते हैं 3000की m. ,, बाइक चलने के बाद इस तरह अगर डिस्क ब्रेक वाली बाइकों का जो ब्रेक ऑयल अच्छी तरीके से क्लीन करके अगर उसमें नया ब्रेकर डाला जाए तो काफी बेहतर रहेगा लेकिन ऐसा सब मैकेनिक करते नहीं है❤ इस पर आपकी क्या राय है
Dada amaro same bike and same problem koto macanik ke dekyechi thik korte pare ni. apnar moto keow puro oil saf kore check kore ni 1 bar apnar moto kore dekhte hobe
It worked for me, i was having the same issue with Abs and just i showed this video to my mechanic and he went thru this steps and fixed the issue. i was riding my bike without abs from one year back_disconnected the abs and made direct non-abs. Today my abs restored back..
Bro my fz v3 has spongy front brake. I changed the master kit and still facing the issue. It happens when I leave the bike without touching for 2-3 days. It is loosing pressure. I checked the brake oil and each time when I check, if I try to bleed the oil from front brake caliper, small air bubbles will come and after that brake will become normal. Can anyone please tell me from where the air is getting entered if anyone is aware? This issue is very irritating and facing this issue from 4-5 months
@@technofun80 use some thread/ small rope then u need to press the hand break in full then tie the thread in the same position and keep it for one night. So whatever air present in the breaking system will be thrown out.
@@technofun80 I am having a issue when the bike passes through big potholes or hump then break fails. Then I need to press the front break many times to recover
Nice video guruji odisha sa ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Thanks bro. It's working
Thank you guruji
साजिर भाई जैसे हम लोग इंजन आयल चेंज करवाते हैं 3000की m. ,, बाइक चलने के बाद इस तरह अगर डिस्क ब्रेक वाली बाइकों का जो ब्रेक ऑयल अच्छी तरीके से क्लीन करके अगर उसमें नया ब्रेकर डाला जाए तो काफी बेहतर रहेगा लेकिन ऐसा सब मैकेनिक करते नहीं है❤ इस पर आपकी क्या राय है
Super guruji 🎉🎉🎉
Thank you so mnch sir
Nice guru ji
Same model bike mere hai abs bilkul nhi Kam kr rha repair Wale bole change Krane prenge jiska cost 13000 something aata hai
Good job 👏❤😊
Amr akta hornet 160r (abs) bs 4 special Edition ache. Same problem hoche dada
Nice ❤
♥️
Dada apki garage kahape ?
Same problem Fz v3
Connect???
Kaha se ho aap
Super video. Very informative
Double disc break rahata hai sar kaise to usko theek karte Hain bil jaam hota hai
Hello Sajir bhai
Good explanation👍
Small doubt
I have yamaha fzs v3 bike
Can we use fzs v4 tank side panel in fzs v3?
Yes bro. You can use it
Repair service charge kitna hai bhai 😢
Dada amaro same bike and same problem koto macanik ke dekyechi thik korte pare ni. apnar moto keow puro oil saf kore check kore ni 1 bar apnar moto kore dekhte hobe
मेरा भी सेम यहीं prablom हे आपका गैरेज कहा पर हे plz address बताना
Bhai adress kya hai
It worked for me, i was having the same issue with Abs and just i showed this video to my mechanic and he went thru this steps and fixed the issue. i was riding my bike without abs from one year back_disconnected the abs and made direct non-abs. Today my abs restored back..
Same problem ho raha hai mere bike me aap kha pe hai patna ya bahar
mere pass fzs v3 ka abs hai agar aapko purchase krna hai to mai acche price pe de dunga
Apnar number ta diben ami mechanic ar ami apnar saate Kota bolbo ekta jinis jante chai fz version 3 head niye
Dijiye argent
Kharcha kitna parega iska??
15000
Sir muze aapka no dijiye aarjant he
👍👍👍👍👍👍👌👌👌👌👌👌👌
Go to the service center.. they'll fix it properly by computer...no need to drain oil... 🫡
bhai ye repair nhi hota hai change hota hai
Service centr wale thik nhi karte hain. Sidah 12500rupees ka kehkar part change kar dete hain..
Shi bol rha mujhe v bola h kya kru nhi smjh rha
Bro my fz v3 has spongy front brake. I changed the master kit and still facing the issue. It happens when I leave the bike without touching for 2-3 days. It is loosing pressure. I checked the brake oil and each time when I check, if I try to bleed the oil from front brake caliper, small air bubbles will come and after that brake will become normal. Can anyone please tell me from where the air is getting entered if anyone is aware?
This issue is very irritating and facing this issue from 4-5 months
Same issue is in my FZ v3 too
@@795ksr any solution bro?
@@technofun80 use some thread/ small rope then u need to press the hand break in full then tie the thread in the same position and keep it for one night. So whatever air present in the breaking system will be thrown out.
@@technofun80 I am having a issue when the bike passes through big potholes or hump then break fails. Then I need to press the front break many times to recover
@@795ksr I am doing this technique only bro whenever the brake is not working.