FULL BUILD Would you try this OBS suspension install yourself?
HTML-код
- Опубликовано: 26 сен 2019
- We picking up this running, driving 1995 Chevy C/K truck from the original owner for a smooth $2000. Cold A/C and a solid cranking 4.3-liter V6 gave this truck the appeal but a full gas tank and a fresh oil change just shows that the previous owner still has love for this 20+ year old family member.
In the next few issues of Street Trucks Magazine, we are going to take you through the process of giving this truck a new life on the same old roads it’s been cruising down since its inception. First starting with a new RideTech Suspension, AZ Pro Performance Disc Brakes and American Racing Wheels with Nitto Tires. The plans don’t stop there but you're going to need to stick to the script the see the next steps. If you're not a subscriber already I implore you to do so at the link below. If this truck doesn't motivate you to go out and start wrenching on your own project, I’m not sure you're in the right place. Now let’s get to the good stuff!
Link to the suspension - www.ridetech.com/products/sus...
Link to the brakes - azproperformance.com/collecti...
Link to the wheels - www.americanracing.com/produc...
RideTech Suspension - www.ridetech.com/ - 812-481-4787
AZ Pro Performance - azproperformance.com/ - 480-420-8175
American Racing - www.americanracing.com/
Nitto Tires - www.nittotire.com/
Street Trucks Magazine Subscribe - engagedmediamags.com/automoti... Авто/Мото
You thought I wouldn't notice that you changed the front grille and headlights from Cheyenne to Silverado but....hell yeah I noticed
I LOVE IT!!!!! I have been reading about the build in the magazine. The video really helps out as well. Thanks again for all your hard work. I really appreciate it!!!! YOU GUYS ROCK!!!!
OBS Chevys are the best looking trucks they’ve made
That last line...... do not be afraid to jump on..... friends.... wrench 😊👌👌👍👍👍 awesome.
That’s so cool....
Wow, what a makeover. Great job.
Gentlemen very impressive good job...now I need 2 buy me a Chevy Truck..
Nice video, I like that kit, looks complete and well put together.
Love redoing 90s trucks
What a gem for $2,000. I’ve picked up my 88 c/k with 80k miles for $3,000 but not nearly as clean 😍
Amazing job, made that shit look easy!
This video has inspired me to customize my 1991 gmc 1500! thnx guys for this video
Truck looks 100% better great job.
That front set up is bad ass
Recently got me a 92 4.3 for $1400 with 170,000 miles. Cool video, gives me an idea of what to do with it
4:55 nice tan
Men this truck is perfect
Bad ass truck bro 🔥
Nice drop I wouldn’t mind my truck looking like that
Very nice ride. Very nice job.👌🏿
Very nice clean truck good job guys
Cool video!!love the truck
Beautiful truck
Fantastic! Show! São Paulo - Brazil
Nice work
That's a nice setup! Awesome to see it happening in my hometown too! Ocala,Fl. the good ole kmart plaza.
Yesir!
Wheres it at!?? I would like to make a trip to get some work done on my chevy
@@motortopiaondemand wheres the shop located? I would love to get some work done on my Chevy
Liked it. Nice job
You could show everyone how you changed the grill from single light to 94 style dual composite grill like you did for this truck.
What a beauty
Beautiful
Very nice!
Nice truck.
Nice 👍 thanks for sharing
That truck looks awesome amazing what wheels and lowering ba truck can do for looks and performance
Amazing make over guys , as well to the lovely lady who helped with the coil overs.....However i do have one question on the wheels, i didn't see it in your description , or in the video...But did you have to use wheel adapters or spacers for the nova alloy wheels?......Thanks for a great video and a bad ass truck.
Cool another 4.3 truck becomes a bad ass street truck 👀 I’m building a 1JZ drift truck outa mine
Wow!! Love it!! Do they make a little like that for a 2004 Dodge Ram 1500 single cab 4×2?
I just don’t want to cut my frame but this is a good look ima have to try it
Muchas Felicidades Joven Por Su Canal
Need this on my truck
Excelente......de Luxe 👍👍👍👍👍👍👍👍👍
What kind of suspension you recommend for a 2001 Ford expedition Eddie Bauer awd...
Nice 👍
Loved the video !! Nice kit ! Wish the audio was a bit louder though .
Thanks! We will keep that in mind for the next one.
OBS gang🤘🏽😎
Obs maffia!
This is what diego needs
0:27 my heart jumps. 😍😂
0BS LIFE 🏁
Did you do a back drum brake to disc conversion on this truck and if so is there anyway you could go more in depth
Truck look 10 times better😎
Hola quedó de maravilla
What kind of suspension do i need for my silverado 1989 , any recommendation
I would really like to see this done on a 99-07 truck this is quite the upgrade compared to the other drop kits offered I have the djm control arm kit 4/6 and the djm upgraded swaybars with lift shackle in rear with caltracs very basic but still puts you into the 2 grand range if you replace the coils and upper and lower coil spring isolation rubbers also this c notch is what should have been developed years ago I made my own support that I welded to the seat bar and stitch welded to the top of the frame rail along with stitch welded in the notch so I could remove it later for upgrades when they became available!!!!!
I want to lower my 97 extended cab silverado. Can you tell me if I would need the exact same parts you used for this truck? If so, how much $$ am I looking at spending?
It would be nice if they did a kit for 2 door tahoes too
Probably long gone but do you still have stock rims and centercaps?
Same trucks in the same condition now are going for 5-6K in Arizona... I was too late in getting one.
Nice truck after the work got done to it. Wat size wheels
what size is the tap for the whole in the spindle
Nice
I want one
Ready for a ls3 crate motor
is the c-notch mandatory for the wishbone? can i skip the cutting but install the bracket?
What did you have to do to switch from single headlights to the composit head lights
Where can I order the exact same kit you got for this truck.?
wait? so you don't have to weld anything after you cut the frame. that kit just slips right over and fills the gap of the cuts?
How hard would it be to install this kit on an obs 2wd tahoe?? The front suspension looks identical.. the rear looks pretty close. The rear cross section that gets cut out is there and the frame looks similar..
I'm surprised to not see a rear swaybar as part of the set up, if handling is part of the goal.
Do you guys sell these trucks? Or are they customers trucks that they are bringing to you all and you’re filming the work? I love all of them.
Any kit for Toyota Tacoma 95-04?
Very nice wt will a job like these cost
Thats nice but y does everybody lower trucks ?? i dont get it
How much is this kit and does the rear disc brake conversion kit come with it??
Soo they changed the whole front also?
Taquachiando cuhhhh🇲🇽
No quema cuhh
John Crankshaft its a v6 so it definitely doesn’t quema 😂
He upgraded to a 383 no more base trim Cuhh
Perfect wheel size,no 28-30"wheels.
They donk fit on this truck.
hello this kit is compatible with the Tahoe sport 3 doors 1996
total cost in suspension, brakes, wheels and tires?
I had to keep replaying 4:50 for some reason on how to put the coil over together, I keep getting distracted.
Same.... I wish it was in slow-mo ;)
@@TopwaterTony Just set the video's playback speed to 0.25 like I did.
hehe
😂
They did it on purpose
Muy hermosa , es mi sueño tener una así
How come y’all didn’t get a vid of y’all sanding down the frame?? Or did y’all pay some one to do it for ya?
Can u do that on a badge ram 2007
I’ve only taken the bed off my truck about 8 times, but isn’t it 8 bolts not 6?
How much it costs for all the new parts? How much it cost for the hand job?
Need this for my truck Live in México.
You will hit the walls/ I mean speed bumps
Finally people are making aftermarket parts for these trucks
What do you mean finally? They have been for years
The grill morphed magically?
What is the name of the whole suspension kit back and front
I got a 1993 gmt400 long bed rebuilt 350
What do yall put on the frame to restore it
Just ordered mine
how much $ was on the build without labor cost
where u get the supension kit from
Se ve perronsisima
Can you provide the wheel specs... offset? Front and rear?
15 yrs ago u could get a nice OBS for $1500 to $3000 now a rust bucket goes for that or more my 1st car was a "84" Cutlass with the good V8 power windows straight body nice all around $1200 from my dad's friend now I seen the same car color and all $6500 and was in need of TLC big time and it was a V6
I'm sorry I have a question how much did I put in the truck to do all that
what the size (fronts 22x9 rears, 22x??) and offsets on the wheels?
you forgot to show about changing out the headlights and grill
It's not super difficult because all the holes are already there for the lights and grille the main issue I found in doing the conversion was the wiring but mine was previously messed with
@@matthewconstance445 even harder is finding the grill and headlights not banged and cracked all to hell
That's a clean set-up, but the price tag on just the suspension is gonna dissuade most people I think. That doesn't change the cool factor though. 👍
Did you guys do a headlight swap to or is it a different truck cuz it’s two different headlights on the truck from the beginning and the truck at the end
mark lightner right!