Just try to clog your airbrush nozzle with two fingers. Hold it, press air and slowly move trigger back. Bubbles in cup will appear. It is great method to mix paint in the cup (also to clean your airbrush with pure acetone). Also it is better to pour thinner first. Thin paint may clog nozzle before it will be mixed with thinner.
You can get an even better clean if you put the cap back on and put your finger over the spray tip. It will cause it to bubble up inside the well and clean it. Great set btw!
Thank you SO much for this video!💕 so clear and helpful; I’m making nails for my best friend and I was really nervous using an airbrush for the first time on them but your video really cleared it up for me 🙏💕😄
It seems easier to mix in a dampen dish and use a pippet to get the polish in the gun. This way, it's mixed better and no risk if bristles breaking off in the gun and less damage to the brush itself.
PLS HELP,‼️ When i try to do this with my airgun, i cure my diluted gel polish (with acetone or alcohol), it doesnt cure properly when i put it in the UV lamp. Meaning it smudges when i put on top Coat. Tips welcomed.
Hey I’m sorry I’m just now reading your comment. I’m not sure what can possibly be going on. What brand of gel polish are you using? How long are you curing the nail? Also be sure to wear a mask while operating your airbrush machine. The fumes from diluted gel polish can be harmful so make sure you take precaution.
How do you make those rhinestone stay there? like when you apply those press ons on your nails the stone just comes off. Because the press ons are flexible. Tried everything but still the stone just comes off. Pls help.
Yes it would. Now the psi I wouldn't know bc it's a small machine but it should work but you may need to seal with a sealer, whatever your painting that's metal
Hey there. I think you can buy replacement needles on Instagram. If you twist the back of the pen and disassemble it you can insert a new needle that way.
I know that I’m hella late (lol), but I just bought the exact airbrush and noticed that you didn’t have the small piece on the front where the polish comes out, are we not supposed to have it attached when in use? Thanks…and love, love, love the way it came out😍😍😍
Well gel polish is sticky after it cures or left out for a certain amount of time so to clean it, use acetone let it sit for a while inside of the cup and then spray to clean out the excess polish in the pen
Hey there! May I ask why would you want to apply builder gel? If anything spears or smudges, you’d probably need to cure again at least for 60 seconds. In my opinion, you may want to apply builder gel before any polish/design
Thank you for this video! I went ahead and ordered one off Amazon and it’ll be here tomorrow! Is it recommended for me to spray overtop a gel polish base with or without the tacky layer removed? Do you recommend tack or tack free top coat?
How long are you curing the gel polish? Remember gel polish stays sticky so if you’re worrying about the tacky layer after you sure the polish, that’s normal.
This was hella creative! My only suggestion is to use gel polish thinner instead of acetone. It won’t compromise the quality of the tip this way. You could also use acrylic paint and thinner bc it dries fast and wont give you any issues under a top coat when you cure! 💙
Acetone can also change the color of the polish over time, I’ve seen this happen with shops that are trying to “extend” their gel polish… it’s not pretty.
I bought an airbrush max from igel, after receiving the product I found out that the compressor makes weird noise when I’m turning it on, it vibrates every other second even when it wasn’t being used, so I recorded a video of the vibration and asked if the vibration was normal or not, they said this was abnormal and wanted me to return the product, after they receiving the product, they told me the vibration was normal again, if I want it back I had to pay $27 for the shipping. I was like why didn’t you guys tell me it was normal after seeing the video that I’ve sent? Plus the whole thing took like a month, I had live chat with them so many time just asking for a return shipping label, and asking if they could help me cause I really needed an airbrush to work with. This was the worse experience ever!!!
@@kouturenailbar Cause I really needed one airbrush so I paid for the shipping. Just received the new airbrush today. It DOES NOT have the vibration issue like the last one at all. Can’t believe they been telling me ALL their airbrushes make this kind of noises just to avoid paying for the shipping? Why can’t they just admit there was some issues with the airbrush I sent back? Its only $26 won’t hurt the company at all. Its not worth it to lose a customer, I could have bought more products from them. :(
Just bought an airbrush and used it today and watched to make sure I cleaned it right 💖 I think my ratio was a little less runny so it made the color come out very splotchy like little dots but I’m assuming it was my ratio ! thank you for this video !! They look so bomb , I will follow your small business , here’s mine I do press ons as well 💞 @nailzbychyna
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Just try to clog your airbrush nozzle with two fingers. Hold it, press air and slowly move trigger back. Bubbles in cup will appear. It is great method to mix paint in the cup (also to clean your airbrush with pure acetone). Also it is better to pour thinner first. Thin paint may clog nozzle before it will be mixed with thinner.
Thank you!
I mixed with alcohol
@@BankaNguyendid it work
You can get an even better clean if you put the cap back on and put your finger over the spray tip. It will cause it to bubble up inside the well and clean it. Great set btw!
Thank you
Mind is blowing up! 🤯Thank you for sharing, Most grateful.
No problem! Thank you for watching
Thank you SO much for this video!💕 so clear and helpful; I’m making nails for my best friend and I was really nervous using an airbrush for the first time on them but your video really cleared it up for me 🙏💕😄
@@valery_draws thank you so much. I’m glad you were able to learn. Make sure you wear a mask while creating your airbrush design!
Beautiful set 💅🏽so glad I found this video 🥰 I only do my own nails but I will invest in this air brush tool just to get the out come I want
Yayy!!! Im glad!!!!💯💯💯
After I ordered this exact one I found you. Thank you sooooo much love.😘
Awesome!!! It is amazingggg. Good luck
This is very late but put the acetone first then the gel cuz the thick gel can clog the airbrush
@@NurmikMaa its okay!! Yes i started doing that shortly after I posted this video lol
Great demo video. Thanks! You cleared up all my inquires.
Good I’m glad!!!
Gurl u a hero you saved my life ❤❤❤❤
Wonderful video, thank you for sharing your mix. Hope your channel blows up, you deserve 20,000 subs and more!
Thank you so much!!!!!!! Imm glad you enjoyed!
Great video, wonderful commentary, and beautiful nails. Thank you!
Thank youuu
i love how fast it is to do with ombre
Me too!
Hi I was wondering if we can do this same process with regular nail polish? Thank you for sharing this video
That’s a good question. I’m not sure, but I can try that out for you.
@@kouturenailbar yes please thank you
Beautiful work. Thank you for sharing. Air brush machines have always freaked me out but they seem a lot smaller and easier to use now.
Np im glad you liked my video
Mind blown. I was about to order the apres aer colours. Trying this first.
Same! The apres is so pricey and so glad I found this video - it should be here by tomorrow! Thank goodness for Amazon prime 👏
love that u used gel polish instead of paint, cool idea.
Thanksss
So you used a base color first...dud you wipe the sticky layer first before airbrushing?
No I didn’t wipe the sticky layer off.
Do you cure the nails since it’s gel you used for the air brush
@@BOSSTECHKIYAA yes ma’am
Beautiful work ❤️
Thank youu
Thank you for your video. I want to mixed with acetone will not resolved the Gel X tips?
No not at all. You’d have to soak the tip in pure acetone for it to dissolve. I use method o my press on nails all the time and they’re pure plastic.
It seems easier to mix in a dampen dish and use a pippet to get the polish in the gun. This way, it's mixed better and no risk if bristles breaking off in the gun and less damage to the brush itself.
Nice!👍🏾👍🏾
PLS HELP,‼️
When i try to do this with my airgun, i cure my diluted gel polish (with acetone or alcohol), it doesnt cure properly when i put it in the UV lamp. Meaning it smudges when i put on top Coat. Tips welcomed.
Hey I’m sorry I’m just now reading your comment. I’m not sure what can possibly be going on. What brand of gel polish are you using? How long are you curing the nail? Also be sure to wear a mask while operating your airbrush machine. The fumes from diluted gel polish can be harmful so make sure you take precaution.
Thanks for sharing!!! I have the old school airbrush system and this is so much more easier! I’m gonna try it out. Beautiful Nails by the way!!!!
Thank you. Yes try it and let me know how it turns out!!!!!!!!!!!
How do you make those rhinestone stay there? like when you apply those press ons on your nails the stone just comes off. Because the press ons are flexible. Tried everything but still the stone just comes off. Pls help.
I use a bling adhesive by zulay. I’ll send the link shortly…
@@kouturenailbar oh ok. thanks ! waiting for link.
Hey why do my aceton n gel color won't mixed?😢it making a clot
That’s a good question. I’m afraid I can’t answer that. What brand of gel polish are you using? And are you sure it’s pure acetone?
Amei! Eu procurei muito saber como diluir o esmalte em gel para usar no aerógrafo! Obrigada 😘
oiê, você pode me dizer por gentileza que "gel" seria esse. qual líquido ela usa pra diluir ?
Também gostaria de saber
Love it!! So easy to ombré with the airbrush!!
Thank youu
Might be the only guy here and a little late but I have two questions. What psi are you using and would this work on sanded steal or aluminum
Lol I’m so sorry i have no idea
Yes it would. Now the psi I wouldn't know bc it's a small machine but it should work but you may need to seal with a sealer, whatever your painting that's metal
Hey beautiful work.
I tried to clean my airbrush same way as u did and it was clogged 😕 end up breaking the needle 🙄
Hey there. I think you can buy replacement needles on Instagram. If you twist the back of the pen and disassemble it you can insert a new needle that way.
Thank you this helped me a lot !!
Im glad!!!
I know that I’m hella late (lol), but I just bought the exact airbrush and noticed that you didn’t have the small piece on the front where the polish comes out, are we not supposed to have it attached when in use? Thanks…and love, love, love the way it came out😍😍😍
Hey there.!! My airbrush did not come with it lol I have no idea why it didn’t but I wound up having to buy a new one!
@@kouturenailbar, oh wow! You bought the same airbrush, or a completely different one?
@@jaclynscott9833 completely different one. I because they were sold out when i needed it
This be my top struggle 😭😭
Will the acetone mixture make the gel peel (tear & wear) ?
Thank u very much
Nope not at all
U use gel polish and acetone? I used it once and it became sticky inside so there was no way to clean it.
Well gel polish is sticky after it cures or left out for a certain amount of time so to clean it, use acetone let it sit for a while inside of the cup and then spray to clean out the excess polish in the pen
I love this i just found your channel i love this!!!
Thank you!
Thanks to your vids popping up for me I need an air brush machine to do my own nails now! LOL
Great!!!
After I do this. I want to apply buildergel, but it smudges, so the polish isn't fully cured. Do you have any tips?
Hey there! May I ask why would you want to apply builder gel? If anything spears or smudges, you’d probably need to cure again at least for 60 seconds. In my opinion, you may want to apply builder gel before any polish/design
wooah awesome idea ! I'm curious to know, instead of acetone, did you try with alcohol ?
No I did not try with alcohol. I’m not sure if that would give me the same affect but that might be an idea for another video. Thank you!!!!!!
@@kouturenailbar I'll make sure to follow that !! thanks to you ❤
Those are beautiful what airbrush machine are you using.
Hey there! The link should be in the description.
Thank you for this video! I went ahead and ordered one off Amazon and it’ll be here tomorrow! Is it recommended for me to spray overtop a gel polish base with or without the tacky layer removed? Do you recommend tack or tack free top coat?
You dont have to remove the tacky layer. I didn’t. The topcoat is up to you I prefer no wipe topcoat. Less work for me
@@kouturenailbar thank you so much love! I haven’t been this excited for a nail thing in sooo long 🥰😍
@@nailexperiments I’m glad you enjoyed the video!!!
@@kouturenailbar I tested it out today and it’s flawless - I just leveled up as a nail tech lol! 6 years later 🙈😅 You the best for the video girl!!!!
@@nailexperiments thank you and good luck on your business!! Kill it!!
My airbrush machine releases a bunch of mist that flows everywhere and it stinks. Does anyone know why? Thank you! ❤️
That’s how you know you got the right consistency. That’s perfect!!!
Hi need your help, if I mix alcohol with gel polish will it work ?
You know what, I havnt tried that!🤔🤔
I got an air brush device because of you😂and I love it
I’m glad
Do you have any other recommendations as far as the air brush machine the one in your video is currently unavailable ☹️
Aww that sucks. I hear apres’ machine is nice and also check out young nails’ machine. I have never used them though.
Hi, doesn't acetone damages rubber gaskets near noozle?
Mine does not have that but I assume so. Acetone damages most rubbers and plastics
I’ve tried this with acetone and doesn’t dry in the machine. I’ve tried less acetone, more acetone and nothing works…
How long are you curing the gel polish? Remember gel polish stays sticky so if you’re worrying about the tacky layer after you sure the polish, that’s normal.
Wow
Hello thanks for tut would you be able to tell me the name of the gel polish you used. The nude and the brown please
Judging by the bottle it’s DND gel polish 🥰
@@nariece9059 right I just need the name of the color though 😩😩
dnd light macore!
Where’d you get this airbrush machine from?🤩
Link in the description
Thank you for this video! I've been wanting to buy an airbrush machine but I was wondering if I could use my gel polish. These seems pretty easy!
Its very easy!! Thank you!
Can you control of the speed of how much air comes out ?
There should be a metal piece that you can twist towards the back of your airbrush pen. That controls how much air flows through it.
I appreciate this video!
Thank you!
What do you mix gel Polish with with a cleaner or acetone?
Acetone!
I will definitely try this
You have to!!!!
Finally ordered my airbrush thanks 😊
Yayy!! Im glad!
wow,thanks for sharing, watching you do is like easy💅😅
Thank you
Did you marble with the airbrush as well
No ma’am I didn’t. I just use gel polish and a line brush and swirled the polish around
How about doing it on real fingernaiils? So how we avoid putting on the clients skin?
You can use lash tape to tape around the fingers or you can just wipe the fingers clean. It’s not hard! Good luck!
can i do this with alcohol?
No
This was hella creative! My only suggestion is to use gel polish thinner instead of acetone. It won’t compromise the quality of the tip this way. You could also use acrylic paint and thinner bc it dries fast and wont give you any issues under a top coat when you cure! 💙
Thank you!
Acetone can also change the color of the polish over time, I’ve seen this happen with shops that are trying to “extend” their gel polish… it’s not pretty.
How does this hold up for the customer with this mixture? Thanks
Very well, no chipping or anything!
Love it , Thank you💚💚💚💚💚
Thank youu
Hi im watching your video where i can buy this kind of airbrush machine thanks
Hey the link is in the description
Thats real pretty!
Thanks
@@kouturenailbar how do you deal with the airbrushing on the skin prior to curing?
@@maureengermain7329 Are use a clean up brush and acetone
The acetone didnt make the gel poilsh thats already on nails peel faster
Nope! It doesn’t
Hola , no entendi cual es la solución para este degradado?
La acetona es una sustancia química que se encuentra en los quitaesmaltes. necesitarás 100% acetona. No creo que el quitaesmalte solo funcione.
Espero que eso ayude
Vc mistura o esmalte com que? ❤
Acetona
❤❤❤
You could use alcool 90° for drink is better
Where did you bought the machine?
Amazon!
do u have to topcoat before u start airbrushing
Nope! Its not needed
Beautiful Sis💜
Thank you
I bought an airbrush from Amazon that has an auto trigger. Its called Autolock...I love it!!
That’s awesome!!!!!!!
Hermoso color café 😘
Thank you!
Súper hermoso 😍😍
I'm trying this today lol. Here from IG
Ayeee!!!
I bought an airbrush max from igel, after receiving the product I found out that the compressor makes weird noise when I’m turning it on, it vibrates every other second even when it wasn’t being used, so I recorded a video of the vibration and asked if the vibration was normal or not, they said this was abnormal and wanted me to return the product, after they receiving the product, they told me the vibration was normal again, if I want it back I had to pay $27 for the shipping. I was like why didn’t you guys tell me it was normal after seeing the video that I’ve sent? Plus the whole thing took like a month, I had live chat with them so many time just asking for a return shipping label, and asking if they could help me cause I really needed an airbrush to work with. This was the worse experience ever!!!
Wow I am so sorry all of that happened to you! That’s ridiculous!
@@kouturenailbar Cause I really needed one airbrush so I paid for the shipping. Just received the new airbrush today. It DOES NOT have the vibration issue like the last one at all. Can’t believe they been telling me ALL their airbrushes make this kind of noises just to avoid paying for the shipping? Why can’t they just admit there was some issues with the airbrush I sent back? Its only $26 won’t hurt the company at all. Its not worth it to lose a customer, I could have bought more products from them. :(
@@北美哪吒 just to be clear, you didnt order the one I reviewed correct??
@@kouturenailbar no it was the airbrush max
Muito obrigada por essa dica top eu amei obrigada
You’re so welcome!
Thanks
I like ít
Mine Just splatters so annoying
You may need a little bit more acetone
@@kouturenailbar thank you ill try❤️
Do u cure it
Yes u do in between coats
Great sharing
Thank youu
Why is your needle expose on your airbrush.. There should be a small piece at the end of your airbrush
I have no clue lol but thanks for telling me
Beautiful!! New Subbie❤
Thank yooooouuuu
have you air brushed on a client
Yes I have!
Omg how smart is this!!! Isnt it chiping after wearing by the acetone? If this works you are geniusssss
Nope! I haven’t experienced any chipping.
@@kouturenailbar ahhw so nice!! Deffently going to check this!!
Do you ever have a issue with a splatter look when using the air brush ? Great video by the way ❤️
Yes ma’am. You are probably holding the airbrush a little too close and you probably need to put a little bit more acetone in your mix
Amei ❤️
Bomb
Just bought an airbrush and used it today and watched to make sure I cleaned it right 💖 I think my ratio was a little less runny so it made the color come out very splotchy like little dots but I’m assuming it was my ratio ! thank you for this video !! They look so bomb , I will follow your small business , here’s mine I do press ons as well 💞 @nailzbychyna
Yeah you should probably add more asses home. Sorry I’m just now seeing this comment
Game Changer
thank you for this. the one i want is $499😩 this will help until i get my monies up lol
Awesomee thank you!!
Hermoso 😍 laboro por aquí te dejo mi suscripción y mi apoyo y si lo deseas pasa por el mio para apoyarnos juntas gracias cariño 😘
Thank you!
Sizzling hot 3 later! ❤
@@iammymusictoo8525 thanksssss
Anyone else get hit by the fumes or is it just me 😅
Yessss But thats how you know you’re doing it right😂
Hey boo, you still doing it this way or you bought the airbrush polish?
Heyyy I never saw this! Yes i still use my airbrush machine