Hallo Dieter super ich danke Dir fuer deinen netten Kommentar hoffe wir koennen mal wieder auf 80 Meter ein Qso machen wuensche dir alles gute Vy 73 wir bleiben im Kontakt de Bert PA5HR💯💯👍👍
Hello there My Friend i think the amp can not work on the 11 meter Band but i don't have tried yet because for me it is not nessesary to do that....in my opinion the Amp wil not working on the 11 Meter...but i wil try this out than maybe i can say yes or No .....wish you all the best Vy73 de Bert PA5HR
@@PA5HR1Hello my Friend, it should be works, because there is a Band Switch in the range from 24-28 mhz. In the middle there is the 11m band. Hope you can test it 🙃👍🏼 thanks
Nice amp, nice operator and a nice video as usual. Hi Bert - congrates to this new one in your shack - hope, it will bring you a lot of fun. We stay in contact... vy 73 de joe - dm7kw
Hello Joe thank you for your Comment and yes i am ver glad to have this one and makes it very easy to make contact on the bands wish you all the best and we stay in contact vy 73 de Bert PA5HR💯💯👍👍
Thank you for the upload. I am aware these amps have parameter locks for FCC regulations. Can the lock be disabled to operate on 11m band ?? If so is there any information on how to unlock ?? Thank you in advance.
Hi there thank you for your Comment and the question...for so far i know is it possible to work with this Amp also on 27 MHZ because the Band switch goes between 24 MHZ and 28 Mhz so if you want to work on 27 MHZ you switch on 28 MHZ and i think it wil be working also on the 27 MHZ .....but am not sure about it and i can not try this out because i have no radio what can work on 27 MHZ.....but i think it wil be working .......thanks again al the best Vy 73 de Bert PA5HR
@@the11metersd.x.channel.55did you buy an acom 1010 are you running it on 11 meters if so how does it proform? Does it give the full power out on ssb on 11 meters? On a meter not just on the lights?
Hello Bert -- I like your setup and personally own two of your radios. A question if you don't mind...So the amp tunes for antenna/band mismatch. At this point, does the transceiver still see the mismatch? Does the transceiver still need to be tuned or is it happy with the connection to the ACOM?
Hello Goodoz if you want to use the Acom 1010 than is the Advice to use with external Tuner because the SWR for the TRX is very bad and can be damage the Finals in the Radio ....you can use the Amp without a Tuner but than you must have a good Tuned Antenne than no problem otherwise you have to use a ext...Tuner my Friend ...Vy 73 de Bert PA5HR👍👍
Hi, I saw your video, and wanted to ask you 2 questions: Can I get the amp to work with an icom ic7300 WITHOUT the relay switch wire? How many watts do I need to use on the ic7300 to run the amp? Thank you.
Hello mister Talaue sorry that i must ay that but why you comment about my Clothes ....i don't have to explaine why i wear my Clothes but i have a reason why and i don't understand what is your problem with that....hope you feeling wel and i wish you all the best ....
Thank you for the good demonstration and explanation of how the amplifier is tuned. Good English. 73 OM TT
Thank you for your very kind Comment wish you all the Best Vy73 de Bert PA5HR
Bedankt Bert ! Groet Cor. PA3CRL
Wieder mal sehrgut erklärt und gelungen
Vy73 Dieter
Hallo Dieter super ich danke Dir fuer deinen netten Kommentar hoffe wir koennen mal wieder auf 80 Meter ein Qso machen wuensche dir alles gute Vy 73 wir bleiben im Kontakt de Bert PA5HR💯💯👍👍
Thankyou a good explanation .KG.
Thank you very much...Greetings Vy 73 Bert PA5HR
Hi, can this Amplifier operate in the 11m CB Band?
Hello there My Friend i think the amp can not work on the 11 meter Band but i don't have tried yet because for me it is not nessesary to do that....in my opinion the Amp wil not working on the 11 Meter...but i wil try this out than maybe i can say yes or No .....wish you all the best Vy73 de Bert PA5HR
@@PA5HR1Hello my Friend, it should be works, because there is a Band Switch in the range from 24-28 mhz. In the middle there is the 11m band. Hope you can test it 🙃👍🏼 thanks
Nice amp, nice operator and a nice video as usual. Hi Bert - congrates to this new one in your shack - hope, it will bring you a lot of fun. We stay in contact... vy 73 de joe - dm7kw
Hello Joe thank you for your Comment and yes i am ver glad to have this one and makes it very easy to make contact on the bands wish you all the best and we stay in contact vy 73 de Bert PA5HR💯💯👍👍
Sehr schön erklärt Bert. Wer Dein Video gesehen hat und trotzdem noch sein Shack abfackelt dem ist nicht mehr zu helfen. 😂😂😂👍 73 de Onkel Günter 🙋♂
Hallo Guenther ich danle Dir ja du hast recht wer jetzt noch sein Shack abfackelt hat selber schuld lach....🤣🤣🤣🤣🤣 Vy73 de Bert PA5HR👍👍
Schönes Gerät hast du dir gegönnt Bert👍👍 Ich wünsche dir viel Spaß damit. 73 und alles Gute DB7BH Holger
Nice Job!!!
Thank you for the upload. I am aware these amps have parameter locks for FCC regulations. Can the lock be disabled to operate on 11m band ??
If so is there any information on how to unlock ?? Thank you in advance.
Hi there thank you for your Comment and the question...for so far i know is it possible to work with this Amp also on 27 MHZ because the Band switch goes between 24 MHZ and 28 Mhz so if you want to work on 27 MHZ you switch on 28 MHZ and i think it wil be working also on the 27 MHZ .....but am not sure about it and i can not try this out because i have no radio what can work on 27 MHZ.....but i think it wil be working .......thanks again al the best Vy 73 de Bert PA5HR
@@PA5HR1 Thank you for reply . Much appreciated..
@@the11metersd.x.channel.55did you buy an acom 1010 are you running it on 11 meters if so how does it proform? Does it give the full power out on ssb on 11 meters? On a meter not just on the lights?
Hello Bert -- I like your setup and personally own two of your radios. A question if you don't mind...So the amp tunes for antenna/band mismatch. At this point, does the transceiver still see the mismatch? Does the transceiver still need to be tuned or is it happy with the connection to the ACOM?
Hello Goodoz if you want to use the Acom 1010 than is the Advice to use with external Tuner because the SWR for the TRX is very bad and can be damage the Finals in the Radio ....you can use the Amp without a Tuner but than you must have a good Tuned Antenne than no problem otherwise you have to use a ext...Tuner my Friend ...Vy 73 de Bert PA5HR👍👍
Is that true? My transceiver is seeing a better SWR than the amplifier does 🤷🏼♂️
Hi, I saw your video, and wanted to ask you 2 questions: Can I get the amp to work with an icom ic7300 WITHOUT the relay switch wire? How many watts do I need to use on the ic7300 to run the amp? Thank you.
does it work on 11 meters band?
Hope it helps to heat up the shack a little bit that you don´t need to dress up as being in Siberia anymore.
Hello mister Talaue sorry that i must ay that but why you comment about my Clothes ....i don't have to explaine why i wear my Clothes but i have a reason why and i don't understand what is your problem with that....hope you feeling wel and i wish you all the best ....
@@PA5HR1 I have no problem with it and you don´t have to explain anything, I just thöught about the shack temperature.
@@MrTalaue okay thank you for your reaction and no problem i think about as a jok....so thank you again vy 73 de Bert PA5HR👍👍