Это видео недоступно.
Сожалеем об этом.
Retrofitting heated seats in Volvo C30 S40 V50 C70
HTML-код
- Опубликовано: 29 май 2016
- Testing my Volvo C30 if its equipped with necessary wiring for the heated seats retrofit, if correct fuses are installed and if 12 volts is present under the seats with ignition on as it's stated in the wiring diagram.
Already swapped the CCM (Climate Control Module) for one with all the extra buttons (seats heating, phone, audio source mode).
Next will try to tap into the LIN-BUS communication to check messages send from the CCM. For that I'll need TJA1020 chip.
More at mr-fix.info/
Add the buttons in the center console and edit cars config om CEM to have heated seats it will work
Some update, I bought a heat seating module and connected it below the seat on the driver side where the cable was already in place but not connected anywhere (on the passenger seat the cable was missing). However nothing happened when I pushed the button. There might be 2 reasons for that, either one must connect the 2 heat pads to the heat seating module otherwise it will not send any signal back to the buttons and/or the CEM needs some software update/activation.
Thanks for posting this video hope it's ok that I post some updates if I get some where in retrofitting my car (C70 -2011) with heated seats.
very cool i subscribed. i just bought a volvo c30 2.4 petrol 2008 its got a few mechanical and suspension troubles that i am slowly fixing up. love the car. eager to see all your upcoming projects with the car
Hope that some of my videos will help you with your C30 :)
Too bad he sold it
U siebie mam standardowo podgrzewane fotele tylko coś się stało, że przyciski na konsoli nawet nie załączają diod w nich umieszczonych, a tym bardziej grzania. Bezpieczniki są całe. Co może być przyczyną? Na filmie widzę, że u Ciebie klikanie na przyciski również nic nie robi, jak poradziłeś sobie z tym problemem?
I have a V50 and want to retrofit heated seats to it. Since you already started doing that, maybe you know whether or not all s40/v50/c30 come with heating elements in the seats, even if the car is not equiped with heated seats? Or do you have to install the heating elements/replace the seats with heating elemens?
AFAIK not equipped.
Kolego mam napięcie pod fotelem oraz wstawione fotele z matami oraz jest też moduł grzanych foteli pod siedzeniem wszystkie kabelki są wraz z bezpiecznikami wodospad zmieniony na ten z guzikami od foteli grzanych i nie działa co tam trzeba jeszcze zrobić by zatrybiło proszę o Podpowiedzi Z góry Dziękuję
Did you ever find out what signal is being sent from the CCM to the Temperature Control Unit? Assume some kind of pulse modulated signal of some variety to the yellow/grey wire (for me anyway, I am retrofitting a 2002 S60 seats)
Sold the care before completing this mod. Sorry.
i have a volvo s40 2005. i have a problem with my fog lamp. when i press the button from the front fog is not coming on the light on there. when i press in the back it's coming on. i check the fuses autside and inside but they are ok. any ideea ?
do you have your headlights in ON position? Some cars require that.
Perhaps it would be easier (and cheaper?) to buy a used seat that has heated seats installed and swap seats?
Or if you can borrow a seat just to see that it works before buying heat pads, temperature sensor and heat module?
There's not a lot of C30 seats, with pads, without memory, matching my interior... Cheaper to build my own heating module. And more fun.
I found Volvos article number for the heat seating module: 31268907 (cost ~60 Euros)
The 2 heat pads have article number 31413914 and 31292184 (costs ~65 Euros each) not sure which is for the back and which is for the seat.
I have not found the article number for the temperature sensor though. The guy I asked couldn't find it so a bit strange.
Perhaps it's included when you buy the pad for the seat?
This will be interesting, I have a Volvo C70 and it was not equipped with heated seats from the factory so I'm trying to retrofit that as well. I have bought buttons for heated seats and removed the plastic cover and instead inserted the buttons for heated seats. That was easy.
I have cabling under the chairs and also fuses installed for heated seats.
However nothing happens when I press the heated seat buttons and I guess I must download software for that and configure with Volvo VIDA?
I also guess that the chairs don't have heating seat elements installed?
If I'm correct then no software change is needed. Only seat modules connected under seats.
Ok? But how did you get the buttons for heated seats to work? Nothing happens when I press them I guess you need to add or configure some software for that?And don't you need to install heating elements in the seats or is that already done in the factory regardless if the car is equipped with heated seats?
Buttons do work. Only the status LEDs are not turning on when you press the button, because those LEDs are not controlled by button directly but by seat modules which are not installed right now. Status LEDs show current status of your heated seats which is OFF all the time since you don't have it installed.
You need to install heat pads (2 in each seat), temperature sensor (1 in each seat), module (1 under each seat).
Ok, so perhaps no need for any software changes/upgrades then.
I am curently trying this on my 2005 V50...so i have bought seats with heat inside and modules on them..and the central console..not only the heating buttons..but all the central climate control unit...with all the buttons...so if i change that unit to,it must work right?no need to activate software or anything if i have the central climate control unit.?
AFAIK it should work. But I sold my Volvo before this mod was completed so no promises.
Did you get it working?
@@martyhoevenberg8068 did you get your own heated seats working
so you cant just get the buttons you need the whole climate unit?
Any update dit you made it work?
Hey I have an 06 s40 with heated seats and recently got an 08 s40 with no heated seats. Is it possible to swap the seats from the 06 into the new car?
Hello and thanks for posting a great video. I need to replace my climate control panel in my V50. Do you have to have these programmed for each specific car? Can I just swap it out for a new one?
I just swapped mine and it worked plug&play.
Some say that you need to replace it with one with the same S/N, as other might not work but I believe that they just bought damages used ones.
if you swap with different CCM you most probably will need to calibrate the DMM via Vida Dice. Currently I am in this situation. DMM controls if the air circulates in the car or fresh air is taken from outside, so in winter windows can get pretty foggy (then I swich on the A/C to dry them)
Ever make a Part 2 Video?
Sold my Volvo few years ago...
Part 2? What happened with the project?
I sold Volvo before finishing it. ruclips.net/video/OVGa_lgR2Aw/видео.html
Hi
And did You allready have heated seats ? i can't find next part of Your work.
Sorry, not yet. Not enough time to work around my car anymore...
@@mrfixpl Hej a czy podkładka manualnych na elektryczne fotele (regulacja też wiąże się z programowaniem ?
this topic is ended right ?
Sold the car before managed to finish it. Sorry.
mr-fix I guess, whatced 1.20 d video. take care.
I successfully upgraded my stock manual r design seats to electric r design seats AND finally got the heated seat function to work. It is NOT plug & play. The electric powered seats fit seamlessly and so does the harness. My 2012 C30 already came equipped with the fuse (located in fuse box under glove compartment). Here is how i did it: After you swap the seats, you will need a software "update" - as your car's parameters are not toggled to to have seat heaters on. I purchased a DiCE clone...and hired a friend from the Netherlands named Frans Kruiswegt - Frans Rules! You need to update the clone's firmware in order to work with VDASH - the firmware costs about $100. Once the firmware is updated, you need to crack your CEM PIN number so that you can re-configure your car's information settings. I had to pay $100 for a friend to hack into volvo servers to achieve this for P1 car. After you get the PIN, you need a VDASH PRO ACCOUNT in order to order the software for the seat heaters. Once your upload the software with vdash thru your dice with your vehicle's pin, the lights for your heat seaters will turn orange when you press them. I used VIDA afterwards to calibrate my CCM unit since it had new software, and now it is working. I chose the very highest temperature settings and they are great. There are 2 heaters, one on the butt area, and the other on the lower back area. I ordered a used CCM waterfall unit off of ebay which had the seat heater buttons, as they are no longer in stock on Volvo dealers sites. It was a long journey, but I am so proud. Good luck to you! : )
Now that is a very good Feedback, thanks! So do I understand correct that electric seat adjustment functions (buttons) work plug&play without any software update? (I uderstood that you needed software update only to make heating work, right)?
Hi! You have done this & would like some insights, I am planning to retrofit
Volvo V40 seats in a different car altogether, do you have any idea if the power buttons could word directly when given power & ground, without any can signal. I dont want the memory to work, just the electrical adjustability
Cheers
Where can i find the wiring diagrams for Volvo's?
google: volvo v50 wiring .pdf
@@mrfixpl thanks for your feedback.. if it was that easy, i would not ask..
...but it is. That’s how I found it in the first place. Checked now and it’s still there. forum.vccn.no/dokumentasjon/Volvo%20koblingsskjemaer/x40/tp3974202_s40_v50_2004-_wiring_diagrams_section_3_39.pdf
@@mrfixpl ok, i will refine my search..
Iam actually looking for the wirong diagrams for the V40.. 2017 model
Was there a resolution to this video Mr fix?
Sadly, I sold my C30 before finishing this mod.
@@mrfixpl that's unfortunate. Would you know if it's possible utilise all factory hardware ie buttons and heated/powered seats from a c70 and visit the dealer for them to install the software. This is what I want to do if possible
it is much easier and maybe cheaper to retrofit it just software way like original from factory with VDASH from D5T5.com
I also want to make my un heated seats we see 50 of 2010 we under-chairs cables, fuses
can you help me?
Hi this is the hardware that you need:
heat seating module: 31268907 (cost ~60 Euros)
2 heat pads article number 31413914 and 31292184 (costs ~65 Euros each) not sure which is
for the back and which is for the seat.
Then you will have to take out the seats and install this.
You might also need to buy the cabling for one or both seats and then only add the cable that goes to the heat seating module from the back of the cable connector of the seat. i dont't have the article number for the cabling yet.
Perhaps it's easier to buy 2 new seats that already has the hardware for heated seats installed.
Then you need to activate heated seats in the software.
Contact your local Volvo dealer and ask them if they can activate it.
If they don't know how, try swap the center console (CCM) with one from a car that has heated seats.
If that doesn't work either ask some Volvo Tuning firm if they can help you check those that sell the software Volvodash might be others as well.
If you manage to activate heated seats in the software you might need to remove the little plastic cover where the buttons for heated seats should be and the buy these buttons and add them to the CCM
articlenumber 8697161 left button
articlenumber 8697162 right button.
Hope this might be useful.
Good luck!
when it goes out and part two seats with heating installation?
Sold the car...
Czemu nie możesz po polsku ?? Wtd
Part 2
Please
Sold my C30 few years back...
@@mrfixpl hi thank you. I say your very helpfull video, I checked my car I say I have the two blue fuses also already and 12v under the seats. What els do I need to check? As I don't understand the last part. Or will it be plug and play now? Thank you for your help! Best Johnny from the netherlands