I will admit it is a "different" design, one Ive never seen done before. Its always a pleasure to see what other countries are out there doing in the mower community., If you ever want a second opinion or some help on something shoot me an email.... Keep on building and riding... be safe!
Be careful welding galvanized pipe. The fumes can make you pretty sick, if you have to weld it, either grind the places where you weld down to bare metal, or weld outside like you did where there is plenty of fresh air. That setup you built sounds pretty good for no muffler, anytime you can break up the sound waves, you essentially muffle the sound. You can build a bracket under the frame to support the pipe so it don't break off the bolts in the head.
Each and every bend you have put in are right angle corners, not bends. This is building up back pressure on the exhaust side of the engine. Please remember that, in a bare bones look at an engine, the gas operated engine is really a air pump. If you restrict the exhaust (output) you are losing power. Also with the added exhaust pressure, you are gambling on a blown head gasket. Keep in mind also that when you restrict the exhaust you are going to raise the temperature of the engine, causing unnecessary wear and tear in the motor.
it's amazing how simply elbows on a exhaust pipe can dampen the sound I drove cars that had only exhauts pipe from the engine to the rear bumper and this not very loud unless your engine runs an open camshaft
They have fixed that problem with a muffler. You can go quite or loud with a real muffler.
U would have a little more power if u straight piped it man u have 2 many curves in your muffler seat up for that motor and it will have better sound
Looks like you need a few hangers to keep the exhaust from bouncing. I think it will make a nice addition.
Nice vid.
Holy crap that's alot of work
The video is 5 mins long dude
I will admit it is a "different" design, one Ive never seen done before. Its always a pleasure to see what other countries are out there doing in the mower community., If you ever want a second opinion or some help on something shoot me an email.... Keep on building and riding... be safe!
Be careful welding galvanized pipe. The fumes can make you pretty sick, if you have to weld it, either grind the places where you weld down to bare metal, or weld outside like you did where there is plenty of fresh air.
That setup you built sounds pretty good for no muffler, anytime you can break up the sound waves, you essentially muffle the sound. You can build a bracket under the frame to support the pipe so it don't break off the bolts in the head.
or wear a resporator
Great idea, sounds good. Some paint and hangers and your good to go.
Sounds Cool
sounds awesome brotha
Use a old fire extinguisher to make a glass pack..it will sound good...
Each and every bend you have put in are right angle corners, not bends. This is building up back pressure on the exhaust side of the engine. Please remember that, in a bare bones look at an engine, the gas operated engine is really a air pump. If you restrict the exhaust (output) you are losing power. Also with the added exhaust pressure, you are gambling on a blown head gasket. Keep in mind also that when you restrict the exhaust you are going to raise the temperature of the engine, causing unnecessary wear and tear in the motor.
WilliamGarges If it runs good like it is it must have good back pressure as is. Just a lawn mower dude
Mark Camaro he has a good point though
Couldnt you have welded a pipe to origanal exhaust and do that for extra quietness?? i had a car/truck muffler on my 50cc atv
it's amazing how simply elbows on a exhaust pipe can dampen the sound
I drove cars that had only exhauts pipe from the engine to the rear bumper and this not very loud unless your engine runs an open camshaft
nice sound but you should definitely add a mount. You don't want it snapping off at the head!
i like how the tractor shakes
Lots of airflow restriction. Not a good idea
i guess that's one way to slow it down
Hey man how did u get where it says turf saver white?? Wanting to do the same
Countryboy7213 people use white tire marker just rub it on your letters
Hey man i have a question.. I am doing the exact same pulley sway as you and was wondering what size belt you used?
Nice gamma las machine !! xD
dude you are suppost to wear protection for your eyes or youll have arc flash and blindness
SmallEngineMechanic427 yeah right
id think that would restrict the flow.
die van mij gaat nu ong 40 maar ik denk dat ik liever voor een trechter vormige uitlaat ga
It was Silent!
deze staat toch op marktplaats?
Turbo ?
get a resonator off of a car or the muffler and weld it on
does it even mow?
Of course it doesn't were do you see the part where the blades are
Does it look like it dumbass
You will lose the bolts on the long run