FIESTA ST REAR DIFFUSER INSTALL! | TRIPLE R COMPOSITES
HTML-код
- Опубликовано: 7 сен 2024
- I decided to change up the rear of the car with the addition of a rear diffuser from Triple R Composites (TRC). It comes in gloss black ready to replace the stock parts!
In this video I install it on my Fiesta ST!
The TRC diffuser will match my TRC front splitter visually and in terms of aero (although the actual aerodynamic benefits are debatable lol)
Subscribe to my channel: bit.ly/29hfAm6
Instagram: bit.ly/2930j8A
Twitter: bit.ly/2930j8A
Music by Joakim Karud / joakimkarud
I had the Triple R side skirt extensions on my old Fiesta and they looked really good and always attracted admiring glances and it would finish off your ST really well
Damo 666 Hi Damo! I have been considering them indeed, I was wondering if they would cause any issues with access to jacking points - did you ever have any problems?
Adam Rainey - They do stop you being able to take off the jacking point caps on the side skirts but you can still jack it up safely. I had them on my Zetec S and never saw anybody else in my area with them, so they are quite unique. I have a ST now (spirit Blue) and might get some more as I like them that much as I sold my old Fiesta with them still on
Nice one Damo, cheers!
Adam Rainey - Get it done mate, you won't regret it as they look smart, just don't park really close to kerbs lol
Very nice videos and channel Adam, thanks. You're my Fiesta bro on the other side of the ocean. Enjoy the car!
gray25xt Cheers mate 😀 Keep up with your channel too 😊
Hello Adam, I have placed a ST diffuser on my Fiesta mk7.5. Do you know how I can install the corner spoilers on the rear bumper? Regards, Frank
Another awesome vid Adam big thumbs up bud.
Cheers Taff!
I've seen this part listed on the site, thought it was cool, but wasn't so sure about it being glossy, but seeing it in a video it looks great, good job and thanks for the video
Like it but do miss the blue trim underneath that the stock one has
Looking good! I have one on my 1.0L Red Edition and love it over the stock Zetec S diffuser!
Nice one Danny! Cheers!
Yo Danny, i'm looking to do this to my Red Edition aswell, what did you do about exhaust? Would you need an exhaust that fits the st valence for it to fit the trc diffuser aswell?
Will this fit a USA model fiesta st?
Wow good work Adam. Looks really good
Thanks Simon!
These do look good, just a shame that the front plastics are more a matte finish and this highly gloss black. I have seen people paint their front plastics bit can you buy a lower front grille and fog light surrounds in the same gloss/gel coat black?
You can't get official Ford ones but I'm sure someone sells them pre-modded to be shiny
Damn good job dude! Looks the part! 10x easier to clean too 😉
Cheers Frosty! You are right, that honeycomb was always a laugh trying to clean lol
Tried to put it on today. The bolts on either side are a pain in the ass. Any ideas on how to get it secured?
Hi Adam do you know if the zetec s rear diffuser fits on a zetec
I would guess so but it is hard to know for sure
@@AdamRainey Thanks Adam I think it will to again thanks for taking the time to reply
Looks awesome. Nice video! 👌
Cheers Kevin!
Hi Adam
I see you using a pair og grips to lower your jack,is something missing or broke,because the jack handle should have a wee bar in one end that fits the 'nut' that releases / locks the jack.
However,iam impressed you got the jack and axle stands to match in blue,lol.
Yea for some reason I thought it would be quicker when filming a video. Call it a hopeful experiment lol But yes, I'm a bit OCD about things matching like that so had to get the same brand and color lol
Can you do this without jacking the car and taking the wheels off? Also what drill bit did you use?
Hi, I was wondering if you could help, you referee to them as plasticy boils things , I’ve lost one on my st and I can’t for the life of me find any
Hi, just wondering as i cant tell from the video but where are you jacking the rear of the car from, it looks like your axle stands are on the sill but cant tell where you jacked it up from?
Great Video! Looks awesome!
Cheers dude!
Another Good vid man!!!
Thanks Dave, much appreciated!
Does this fit on base model fiestas? Haven’t really looked into the compatibility between se and st models
Hi Hiro, yes it should fit but if you dont have the fiesta ST rear spats, the sides will sit out a bit. Cheers :D
Looking really smart mate. I have a base model fiesta and I'm fitting the ST rear bumper (like the one you took off in this video) and side skirts to it. My car is deep impact blue, obviously the parts are gonna be spirit blue. Do you reckon it'll be massively noticeable? I know they're very similar
Cheers!
It might be a little noticeable but if you get some other bits in spirit blue then it might look like a theme
Hey man, came across your comment now and wondering how did the project go? Did you install the full st kit (front, rear and side skirts) on a normal fiesta without much issues? Cheers
Hi! can you send me the photo of your fiesta? I'm trying to fit the same bumper to my fiesta but i don't know if that rear corners will fit or not
Hi Adam, just a quick question, I want to take my rear diffuser plastic but off and paint it gloss black, is this possible without taking the blue bit below it off??! And is it just clipped on
You will need to essentially take off what I took off here and then remove the bottom blue bit from that, do your painting and then reassemble and put back on the car
Where can I get a diffuser like this? Looked everywhere and having no luck
Hey Joe, I got mine direct from triple R composites. If they are out of stock they should be back in the near future
Adam Rainey Awesome thanks very much. I'll check them out!
Hi man, I'm looking for the diffuser you already had installed on your car, where can I find it? It's stock? Cause in my country the mk7.5 titanium version has a different one! I really like it.
Yes it was stock. I don't know, you may need to go to ford and ask for a part number. I actually have the original ST diffuser still in my garage. What country are you in?
@@AdamRainey I'm from Colombia, South America. I'm looking for the entire part have you removed.
@@AdamRainey have you still got the diffuser for sale?
now better look
great video dude.. i think the next mod should be spoiler risers. now u can find the Aesthetic Energy Spoiler Risers in spirit blue color. i think that they will be a great upgrate for ur car :)
Hi Mixalis, thanks for your support! I have already purchased some wing risers, just haven't had the time to get them on! Mine are boomba racing which a brand of excellent quality from the USA. They were one of the first (possibly even original) wing riser providers for Fiesta ST that I believe everyone else copies their design. I agree though, i love the look of the wing risers!
Looks good mate, enjoying your videos subscribed
Thanks Big Willy! I appreciate the support mate!
Ive got the same car, just need the mp215 and lowering coils.
Big Willy nice, the mp215 upgrade is so simple and really makes the difference!
I live right by Mountune HQ so can just roll down there anytime. Im liking the idea of a short shifter as well so will probably get a few things done at the same time. Best mod so far is my Mountune cat back, it looks and sounds great. Check out OC Motorsport they have some good things there as well. Where did you get those Boomba Racing cap covers and oil cap?
OC Motorsport built and tuned my car and couldn't be happier with it! Just waiting for them to release their Stage 5 package so I can leave Stage 4 behind :D
Are spat panels easy to install? I put on a zetec s diffuser and it's hanging of at the sides, would love your input mate. Cheers. I'm from Belfast btw
Hi Gary, I would imagine they would be easy enough to put on if you can get your hands on some. My guess would be a couple of holes drilled and a couple of rivets. Or maybe even just some tiger seal and clamps overnight. Cheers, hope to see you out on the Belfast streets :)
Thanks man. Got the spats gonna tackle them during the week! 👌🏼
Looks the part mate!
Cheers!
Im from spain me shearch this product in amazon and ebay nad no see ... please give you link for buy . Im from spain thanks .
triplercomposites.com
Você ainda tem o difusor antigo?
dove comprare un diffusore così in ITALIA
Does the trc gel badge come off???
You could pry it off I'm sure
Salut . super video . je pourrais avoir le lien pour ce diffuseur st que je puisse commander il et magnifique svp . merci .
Merci! www.triplercomposites.com/product-page/fiesta-mk7-5-zs-st180-rear-diffuser
Hi mate where do u buy them from look smart
Directly from triplercomposites.com
Any idea how often triple R re-stock these
Not sure mate, drop them an email 🙂
Adam Rainey I’ve tried, just not sending for some reason, I’ll give them a call Tuesday ... cheers mate
will it fit on my ford fiesta st line 2017?
Hi Pedro, it should fit on a MK7 ST line yes (I think!)
I really love the look but unfortunately it doesn't fit on the US STs
what is your mags and tire size sir?
Wheel specs: 4 x 108, 17 inch diameter, 7 inch width, 47mm offset. Rubber specs: 205/40 R17 W (84) Michellin Pilot Sport 3
What is the exhaust?
Hi Lucas, this is the Mountune cat back exhaust. Cheers :)
Where can we buy this?
www.triplercomposites.com
SWEET$
super sweet :)
I’m installing my own diffuser fins so I need to reattach the stock diffuser.
What size self-tapping screws do you think would reattach it where the rivets once were?
DannyMcCabe1991 hi Danny would self tapping screws be strong enough to hold it? If I was reattaching stock diffuser I would probably try to use rivets like stock uses
Love your video's man. The ST's looking sexy 🙌🔥
Rhodri Owen Cheers mate! If you like it now, keep am eye out for some upcoming developments... 😁
Adam Rainey Can't wait!
Hi dude is this still available to buy? Can’t find it online
Yes it is, google triple r composites fiesta st. It is on their website
Thanks Adam I’ll take a look
Very nice
Thanks
Hi, brow can i order?
Hello, I got it direct from the TRC website