Это видео недоступно.
Сожалеем об этом.
VESC Tool Setup & Programming Guide 2024: Black Mamba ESC Settings (Phase One Pt. 4)
HTML-код
- Опубликовано: 13 авг 2024
- In this video, we set up the VESC Based ESC (MakerX D75) on the Black Mamba Esk8 build. This board has a pretty interesting setup, using (limited) full current reverse, some higher power settings, and a PPM remote. Stay tuned for the first ride video coming soon! This video is heavily chaptered for good reference points so you can best learn how to program your VESC-based ESC. The steps I take in this video are pretty universal, but if you are unsure of something please ask questions, because you can easily brick your ESC if you do something wrong.
The Black Mamba build is a 14s6p VESC-powered electric skateboard, using a MakerX D75, Flipsky 6374 motors, Onsra TKP trucks, Newbee Impaler rims, SKP tires, a Hummie deck, and a Zmote from Kamen on Tindie.
Installing the electronics in this build was not too difficult, but it was time-consuming as I ran into a couple issues I didn't document on video. I accidentally fried a switch somehow when I was soldering up the wires for the light control, and that took quite some time to figure out. After getting the switch wired up, it's pretty awesome to have the remote controlling the lights, just like on my old Hummie build!
Check out the previous videos in this series, starting here:
• Black Mamba: ONSRA TKP...
Please feel free to ask any and all questions in the comments!
Motors: China - flipsky.net/co...
US - boardnamics.co...
ESC: www.makerx-tec...
Enclosure: www.eboardsper...
Gear Drives: boardnamics.co...
Battery: skyartpower.com/
Deck: www.instagram....
XMount: skatexboard.co...
Remote: wavrx.com/prod...
Leave any questions in the comments section!
Discounts (Some are affiliate links):
Exway: shrsl.com/3t7j3
$15 off use code RBEM
Onsra California: www.onsracalif...
$80 off use code RBEM
Momentum Boards: www.momentum-b...
5% off use code rbemotion, rbemotion as representative
Flipsky: flipsky.net/?r...
$10/off use code RBEM
ESKDIY:
Code RYAN2021
B-One Board: boneeboard.com...
Get $200 off with code RBEM
XBoard: skatexboard.co...
Get 8% off with code RBEM
Revel Boards: www.revelboard...
Get $20 off with code RBEM
Gyroor Board: code HOVER20 for Hovershoes
shrsl.com/3s3xj
Check out my gear below (these are affiliate links that help me out)
Main Camera: amzn.to/3j39fP8
Secondary Camera Equivalent: amzn.to/3DGYeuP
Overhead Camera: amzn.to/3BJS8tg
Lav Mic: amzn.to/3lJh12M
Panel Lights: amzn.to/2XblFge
Tube Light: amzn.to/3iZqMaX
Extra Light: amzn.to/3BIe0VX
Keep in touch with me and my projects on social media at the following:
/ rbe_motion
/
rbemotion
Create an account and message me on the skate forum:
forum.esk8.new...
Business email for inquiries:
rbe.motion.info@gmail.com
Timestamps:
00:00 VESC Programming 2024
00:39 Acquire VESC Tool
03:00 Attempting Wireless Programming
03:41 Using Metr Pro for TCP Bridge
04:41 Bridge Connected
05:07 What does "Old Firmware" mean?
05:46 Realtime Data
06:00 Motor Detection
06:24 Duty Cycle Current Limit Start
06:34 Motor Size
06:59 Battery Setup
07:45 Battery Current Max Explanation
08:26 Battery Current Regen Explanation
09:10 Mechanical Settings
09:50 Run Detection
11:01 Vesc Tool Fail 1
12:20 How to Update Firmware on MakerX ESCs
12:59 Bootloader
13:16 Flash Firmware
13:40 Swap Cable Over
14:11 Frustration
14:58 Board Open with Cable Connected
16:09 Motor Detection on 5.3 with Tool 6.2
16:30 Successful Detection
17:18 Input Setup Wizard
18:12 Setting Max Min Pulselength
18:51 Setting Control Mode
19:12 Pos Ramping
20:19 Final Vesc Tuning
20:54 Motor Current Tuning
21:11 Absolute Maximum Current
21:29 Batt Max & Min
21:36 Voltage Cutoffs
22:22 Fault Stop Time
23:20 Remote Throttle Curve
24:00 Explaining Smart Reverse vs Current
24:36 Current Brakes with ERPM Limit
25:40 Switching Sides of ESC
26:17 Replicating Settings
27:00 Reverse Demo
27:44 Summary
28:50 MakerX Switch Setup
30:57 Closing Thoughts
Media used in this video:
Track: Dominic Strike - Heartbeat
Music Provided by Magic Records
Listen To The Original: • Dominic Strike - Heart...
Free Download: fanlink.to/o9h...
------------------------------
Music from Tunetank.com
Thank you so much for taking the time and effort to make this video.
The music in the background makes it about 100 times more difficult to listen.
Of course! Thank you for the feedback I will make sure to double check the sound levels and adjust accordingly next time 🙂
This is actually very timely. I had the mboards endurance for a week now. Thr vesc app connected on day 1 and now it doesnt anymore. Mboards says yhe makerx bluetooth module is faulty. The error says unable to read firmware version.
Hmm that's tough, I'd try a cable personally
@31:34. I am receiving the same (Read Firmware Version) error when I try to connect. How do I fix this so I can use the Bluetooth connect?
You'll likely need to use the USB cable, flash bootloader per/side and then also flash firmware per/side.
@@RBEMotion. I tried but it won't hook up to my table through the usb-c . Do I need to download a different vesc tool for it to work ?
I Just got done yelling on esk8 that we need RB to do a comprehensive guide to vesc programming.
Haha nice! Hope you enjoyed!
Hi.
I'm looking to implement regenerative braking on an ebike so I can have proper range of braking.
I'm from France
Depending on the voltage, you'll want to be careful to make sure you don't exceed your ESC's rated voltage. However, the setting you're looking for is going to be a combination of "Battery Regen" and "Motor Negative"
You can play with those settings until you find the configuration you like, but make sure not to exceed your battery's max discharge and charge and discharge amps.
So annoyed, it's not working on my laptop.. Spent a day trying to ensure the opengl is available, inline with the requirements and it's still not working :( Tempted to do it by the app, but my Vesc esc doesn't have bluetooth. Do you know or does anyone know if I can use my android vesc app and connect USB-c to Micro USB into the ESC? will it work?
Dang that sucks! I know VESC can be super finnicky. Are you on Mac or something? I haven't really had any issues with using it on PC, not like that anyway. You cannot use a usb to your phone, unfortunately, it's been asked before.
@@RBEMotion Yeah, just tried it yesterday with someone else's computer and his computer is older than mine?.. Not sure why it's not allowing it to load up? Says I'm missing.dll files and not able to find OpenGL or higher and I've got OpenGL 3.1. Think we've managed to put some new settings onto the esc.. need to go out and ride, see what happens?
I’m about to attempt (first ever DIY) programming my makerx dv6s. U think I should have any concerns strictly using the BT. 🙏thank u a ton for these how to videos. 💯😎💯🤙
Nevermind. I just ran into the same issue u had 😅😅gonna have to plug it in
You might haha
Well there you go 🤣🤣 thanks vesc
i purchased this and i have the flipsky 75100 v2 pro with bluetooth altho when i try to scan for bluetooth in the app nothing ever comes up. in android mobile app. any ideas?
Was the bluetooth module pre wired to the esc? Are you certain the ESC is powering on? Is it the right compatible bluetooth module?
@@RBEMotionits the inegrated bluetooth module that came inside the flipsky 75100 pro. ive tried multiple versiions but the one im wondering about is the android appfrom play store. this all works perfect on my laptop. id hope its compatible... thats why i bought it. it doesnt pick up devices on two of my phones
@@RBEMotionthe issue fixed randomly. i learned any device u have ever connected to the vesc u must disable if thees issues come up. as soon as i disabled my laptop this started working.
Sorry haha missed your reply. Classic vesc moment to just start working on its own. That's an interesting observation though.@@markj6984
@@RBEMotionnp ive learned so much about this controller in one week. you know much about connect a 3 wire pas sensor if possible? im also trying to tune my motor a bit more as its a bit shaky once and a while on startup. seems to be an erpm issue.i am using a 5500g geared hub motor 1200watt with higher running rpm.
Nice!!
What RC is that do you using?
If you mean which controller, it's a Zmote dual trigger from Kamen on Tindie. Been loving it so far, but it's still somewhat new so I haven't been promoting it yet.
What bms would you recommend for 18s minimum?
Usually I'd default to JBD or LLT BMS nowadays if you want a smart bms. If you don't need the bluetooth features, the ones from Daly work well too but may be larger in size.
can you maybe give me a super specific model for me to search for. I really respect your opinion. 12 - 18 maybe even 20s with Bluetooth and app for monitoring cells.
I went to the jbd website and just wanted to make sure I was getting the right one. I have built plenty of vesc boards but this will be my first battery build and I have everything except the bms and the Samsung 50s batteries
btw fairly experienced with vesc but this video is juicy and has some detailed things I learned. many thanks
@@JamesWaltnerWell, I personally use the little square 14s bluetooth one, and the 10-17s one. Let me know if that's useful. They're mostly the same. I usually pick the smallest discharge one since I don't run them discharge.
time to put the laptop away and show the settings on the phone apps
If that's something people are interested in, I'm willing to make a video on it, I can add it to the list.