You say alignment specs were a perfect? Like before you aligned it or after? I’m doing a 2.5” and am curious as to if I’m gonna need an alignment or mot
Thanks for the video on the kit, but I have a couple comments. The front end isn't level. It is now higher than the back end. I need to re-measure my truck on a known level surface, but in stock form I'm only seeing that the rear is about 0.5" higher than the front. Even if you get the Pro Comp 64170k kit that includes 1" rear blocks and shock extenders the truck still won't be level. Did you take any measurements to confirm the increase in vehicle height at the front?
Yes, you can find that information in the instructions. We have the pdf on our the product page. Drivers side spacer #94-10877 and Passenger spacer #94-10879 steps 21-23.Tire and wheel size is also on the top portion of the PDF after the parts list. If you have any more questions feel free to use the live chat on the product page.
Most underrated truck on the market is the Titan
Awesome! Helped a lot!
You say alignment specs were a perfect? Like before you aligned it or after? I’m doing a 2.5” and am curious as to if I’m gonna need an alignment or mot
You will need to get an alignment after install
Thanks for the video on the kit, but I have a couple comments. The front end isn't level. It is now higher than the back end. I need to re-measure my truck on a known level surface, but in stock form I'm only seeing that the rear is about 0.5" higher than the front. Even if you get the Pro Comp 64170k kit that includes 1" rear blocks and shock extenders the truck still won't be level. Did you take any measurements to confirm the increase in vehicle height at the front?
The 2" level kit looks great on this truck.
Would this kit work for a 2021 Titan xd pro4x?
Do you guys have them for non xd 2017 Titans?
I'd like to know this also
Doesn’t look level. Looks higher in front.
I looked at your webpage but don’t see where it talks about the bumper extenders or 305/55/20 tire option. Is that in the kit instructions?
Yes, you can find that information in the instructions. We have the pdf on our the product page. Drivers side spacer #94-10877 and Passenger spacer #94-10879 steps 21-23.Tire and wheel size is also on the top portion of the PDF after the parts list. If you have any more questions feel free to use the live chat on the product page.
LiftKits4Less thanks so much. Seriously looking at this kit. Your video was super informative.
@@timscott70 Let us know when you're ready. We ship for free if you're in the USA.
LiftKits4Less will do. Looking into the bumper extension. Never seen one with that installed.l but 305’s would be great! How much trimming?
@@timscott70 Max tire is 33x12.50 and the trimming was very minor. Mainly on the mud flap area in the front wheel well.
2” is too high imo. Interested in before/after measurements as now the nose looks slightly higher.
How much did you say it was again?
Truck runs a 275/60/20 factory. I run a 275/65/20 ON REGULAR TITAN.
I run 305/65/18 on my Titan Pro4x with a 2" level kit.
Is this only for XD versions??
What do kits like this do to the drive line angles, CV joint boots, etc?
This kit is not going to have any significant impact on your CVs or dive lines as it is a very conservative height
is this kit still available, cant find it online
liftkits4less.com/pro-comp-level-lift-kit-2016-2017-nissan-titan-xd-4wd-gas-diesel-64170#
Question have you heard of this happening to XD You could get coil bucket contact anything over 1.5” and you also might lose your ball joint?
Nope, I bet you can barely see out of the drivers seat. I'll pass on my '18 XD.