Thanks for that clear explanation and that good video. This confirms what I imagined. I would put the tower and the sub 1( internal side of the tower, not external) on the stage and put the sub 2 on the floor under the sub 1. I think that the sound will improve further.
The HPF setting settings on the sub2 does not affect the Submatch Thru signal to the sub1. It only works if you used XLR from LINEOUT sub2 to LINE IN on the sub1
Excelente video! Será que con 2 piezas de sub 1 puedo generar el mismo bajo que el sub 2? O de plano seguiría siendo muy superior 1 pieza del sub 2 que 2 piezas del sub 1?
@@josealfredfernandes Adding a Sub1 to a Sub2 doesn't do much. At lower volume the Sub1 does add some different frequencies, but once you turn up the volume the Sub2 takes over and the Sub1 disappears! Not worth the effort and definitely not worth the money.
Does anyone know if its possible to make a subwoofer using Bose Sub1 into the TX312 ALTO PA speaker...just wanted to get an insight for those who are familiar with this...Thanks
@@emmanuelquinones5084 this are gears for the road they are not home systems or toys if im going to baby them i woulnd't get bose. Beside the buttom has rubber feet for it it is meant to be plain solid on the ground.
Thanks for that clear explanation and that good video. This confirms what I imagined. I would put the tower and the sub 1( internal side of the tower, not external) on the stage and put the sub 2 on the floor under the sub 1. I think that the sound will improve further.
The HPF setting settings on the sub2 does not affect the Submatch Thru signal to the sub1. It only works if you used XLR from LINEOUT sub2 to LINE IN on the sub1
Excelente video! Será que con 2 piezas de sub 1 puedo generar el mismo bajo que el sub 2? O de plano seguiría siendo muy superior 1 pieza del sub 2 que 2 piezas del sub 1?
definitivo que un sub 2 es mejor que 2 dubs 1. hice otro video acerca de eeso chekealo en el canal. Gracas.
congratulations great video great explication!!!!
115 to 90hz mid bass 60 to 30hz sub bass frequencies
Good video
Mid bass and sub bass frequencies
I got a 20mm threaded pole at Guitar Center for $25 which holds 100 pounds! Bose is trying to squeeze every penny from their customers.
In India, it's quadruple more expensive!
Hey! According to your opinion, adding additional Bose sub1 does any midbass change?
Eg: Bose L1 Pro32 with Bose Sub1+sub2
@@josealfredfernandes Adding a Sub1 to a Sub2 doesn't do much. At lower volume the Sub1 does add some different frequencies, but once you turn up the volume the Sub2 takes over and the Sub1 disappears! Not worth the effort and definitely not worth the money.
@@WWeiss-nv5vz thanks
I run my s1p and sub1 at 10:00 I believe it give more headroom ie less clipping
sub1 buttoms out past 10 even without red light
Have you updated the sub to see if it gives you less clipping
I did but i really dont see the difference
Does anyone know if its possible to make a subwoofer using Bose Sub1 into the TX312 ALTO PA speaker...just wanted to get an insight for those who are familiar with this...Thanks
🎊🔥🔥🔥🔥🙏🙏🙏exelente Video
You put the woofer on the concrete? 🤣😂
Emmanuel Quinones What about it?
I would never, I like taking good care of my things
@@emmanuelquinones5084 this are gears for the road they are not home systems or toys if im going to baby them i woulnd't get bose. Beside the buttom has rubber feet for it it is meant to be plain solid on the ground.
@@llaugercastillo I just couldn't do it...I would put a mat underneath
@@emmanuelquinones5084 Some people just like to keep their gear free of scratch, I am that kind of ppl.