Excellent excellent 👍🏻👍🏻 wondering if you can use any kind of material on this vinyl transfer like polyester,, cotton or is a specific material to use this vinyl??
The cameo is basically the same when it comes to tracing. We have a trace button as well! We can work on other stuff as well while cutting things too. We can work with rolls and let it cut nonstop for things up to 10feet which is pretty cool, they did just drop a new 24in cameo I’m looking at buying it
Hi, do you know another program that is free or will cost less than Adobe illustrator and I would be able to do an image trace and do what you did in your video from min 3:40 to min 4:05 when it became lines
@@HustleNinjas even though it’s small? About 2-5 cm on sleeves. I’m trying to find a specific tool that will allow me to place QR code’s on sweater sleeves and other small garment. Any direction would be great! P.S: just followed, love your channel.
@@edwinescobar4356 It's not really about the size, it's the intricacy of the design. You would have to weed a lot of the negative cavities within the design. You can look into screen printed transfers like supacolor, fmexpressions, etc. and just press it on.
I have a Question how come some people do another press for a few seconds after they peel it or is that only for ink transfers?? To like seal it in the shirt all the way? But you don’t need to do that with vinyl?
Hi Rich, I am looking for the softest inkjet transfer paper to print my own image. Do you have any suggestion? Or did you make a video to show that? Thank you.
This one is a bit cheaper: ruclips.net/video/tFg7ZbWcg8E/видео.html&lc=UgzIMCzAXNHA1lOijtF4AaABAg And then you have the cameos and what not, I'm not a huge fan of them, but they are cheaper.
Hi! Thanks for this tutorial, it really helped me. However, I have a question. I am a beginner in this topic and just starting heat transfer. I make T-shirts using vinyl (Stahls foil), but I have trouble transferring it. I use 100% cotton T-shirts, I follow the manufacturers' recommendations (temperature and heating time). However, when I remove the transfer (transparent) foil - using the cold and warm method, the transparent (transfer) foil pulls the vinyl very much, as if the vinyl would not stick well to the T-shirt. You on your film take it off with lightness, with one movement of your hand, as if the transparent film could fall from blowing air. And for me it sticks very strongly to vinyl. Why, what could be the cause? The thermal transfer press (ordinary, relatively cheap) heats up well. What am I doing wrong?
The puff vinyl link is pinned in the top comment. You get the design on the vinyl through the cutter software of your cutter. For instance I have a cricut so I design my image in canva or photoshop then upload that image into cricut design space. You start with getting a cutting machine and learning how to create designs or buy them from Etsy or other online sources. Hope this helps.
Loving that Adobe software....definitely going to give it try. I can always come here when I need advice on how to work with these selections. Thanks and God bless! 🤗
Great video i must say bro hope everyone is taking advantage of this but before i go Im starting my heat transfer business on a low budget and would like to know if i can use the HP 2775 PRINTER TO USE WITH MY INKJET HEAT TRANSFER PAPER??
Hey Rich! Any recommendations on a Heat Press like the Wala? Auto open, clam shell with a drawer. They discontinued the WalaPress that you have in this video :[
Can someone explain to me please. If i want to print a graphic I made in photoshop it;s colorful and I don't want it to be a square do it uise printer and then cutter or how does it work?
Do you have issues with customers when vinyl on cotton?, mine have issue when vinyl on cotton, after few wash using washing machine, it became vinyl not hold on cotton, easily peel, but vinyl on microfiber, polyester, honeycomb shirt work great
@@hamizishah3177 it depends on what the heat transfer vinyl recommends, they're all different, but you'll want to make sure your heat press is reading accurately with a temp gun or sensor and make sure the pressure is good.
I really liked the sweatshirt. Is it a Bella + Canvas? I am new to sweatshirts and I am unsure which brand to purchase. Love all your content. I have binge watched almost all your videos. They are easy to watch and I like the laid back atmosphere. Have a good week. 😺
@Hustle Ninjas have you had any issues with Cutting master 4 working in AI. My cut/plot option is gone since the 2020 update? A lot of others having the same problem.
Graphtec Cutter:
bit.ly/myvinylcutter
Cameo Cutter:
bit.ly/cameo-cutter
WALAPress Heat Presses:
bit.ly/walapress
WALAKut Puff Vinyl:
bit.ly/walakut-vinyl
Pattern Heat Transfer Vinyl:
bit.ly/pattern-vinyl
That's hot mang... Lo... Yo it looks like it feel like swade.... Ima get that...
had to watch again. man it looks like a patch.... i want to double color a design like that for my retail.
What’s the name of that sweater ?
Can u use that app n use a cricut
You would need to design it in Adobe Illustrator and then import that file to your Cricut cutting software.
I didn't think about heating the transfer up before I weed it. That's a good help.
Excellent excellent 👍🏻👍🏻 wondering if you can use any kind of material on this vinyl transfer like polyester,, cotton or is a specific material to use this vinyl??
Vinyl is pretty universal and can be used on just about anything.
@@NekoPrints thank you excellent..👍🏻
Thank you so much for the great thorough and great quality videos, I’m starting my own side hustle and this information is GOLD, thank you
How’d that puff vinyl hold up after washing? Looks super cool! Gonna try some out for sure!
Still looks good!
@@HustleNinjas what puff herb is this?!?
@@HustleNinjas any knowledge on how long or how many washes it holds up for?
The cameo is basically the same when it comes to tracing. We have a trace button as well! We can work on other stuff as well while cutting things too. We can work with rolls and let it cut nonstop for things up to 10feet which is pretty cool, they did just drop a new 24in cameo I’m looking at buying it
Q. When ya pressed first one it looked. Like it burnt a square in tshirt does it come out?
Can you put adhesive on the heat press pad so the shirt wont move???...thanks
Does the vinyl have to match the cutting machine or can we use any brand of vinyl like I have the cricut but do I have to use there brand of vinyl?
Waka Puff is nice. Recently purchased from HTW and applied on a few shirts. Also holds up well after a few washes. Thx for the video Ninja - Peace 🤙🏽
How many washes have you done ?
does it still hold up
Great video. What kind of vinyl is that. I want to make my labels with the material in the America Project Polos. Any Idea. Thanks
Thank you brotha man. This video helps alot
Great video. Why did you not cut green side up?
Super cool. Thanks where did u get the puff vinyl from.
Your camera's getting better and better! super clear!
For anyone who is have a problem with their vinyl not sticking to your shirt let it cool for a while after pressing worked like a charm!
You need the info of the vinyl. Some are hot peel, some are cold peel
That puffy ninja heat press is dope as hell! I’ve never seen that before!
Hi, do you know another program that is free or will cost less than Adobe illustrator and I would be able to do an image trace and do what you did in your video from min 3:40 to min 4:05 when it became lines
😂 you’re hilarious. First video I’m watching on your channel. Thanks for all the great info!
I also have a graphtec took me awhile to learn it I'm still learning. Thank you for a[[ you do.
Saw puff vinyl on my toddlers shirt from walmart and now I’m here haha. Super helpful video, as always.
while in Canva can you send designs straight to vinly cut machine ?
No
Hey! Can I make QR code’s with this and put it on sweaters and tshirts
Better off getting it as a screen printed transfer because that would be hard to weed as vinyl
@@HustleNinjas even though it’s small? About 2-5 cm on sleeves. I’m trying to find a specific tool that will allow me to place QR code’s on sweater sleeves and other small garment. Any direction would be great!
P.S: just followed, love your channel.
@@edwinescobar4356 It's not really about the size, it's the intricacy of the design. You would have to weed a lot of the negative cavities within the design. You can look into screen printed transfers like supacolor, fmexpressions, etc. and just press it on.
You're the MAN for this bro. Puff vinyl? I never knew. Definitely need this in arsenal. Lol
Rich laughs at his own jokes...lol
My guy!
i literally love you, i learn sooo much from you
Great information. Where did you get your purple heat press?
im going to order some of the puff vinyl.
looks really dope
Dope vid! Is there any website we can upload our own designs and have them use the puff vinyl for it?
I have a Question how come some people do another press for a few seconds after they peel it or is that only for ink transfers?? To like seal it in the shirt all the way?
But you don’t need to do that with vinyl?
Quick question, with the puff Vinyl you can’t create a multiple color logo to cut and press or it’s just solid colors
I have not tried yet
Hi Rich, I am looking for the softest inkjet transfer paper to print my own image. Do you have any suggestion? Or did you make a video to show that? Thank you.
Neenah brand
That’s cool, I’m just starting out and it’s a journey to get everything right. Great vid. Thanks 👍🏻
How can I use my adobe ps app for this
You would need to make the design as a vector. Or design it by layer/color
Hello.. you were saying "command" for the shortcuts did you mean "control"? Am setting up my hotkeys and I feel like you meant the control key
Control on windows, command on mac
Is sisser easy weed vinyl good?? How does it hold up with washing
If pressed properly, it should last as long as the shirt.
@@HustleNinjas i see. thanks for the reply? also is it ok if I hot peal? thanks for the quality vids btw. helps a ton
@@kifter4254 Some heat transfer vinyls will be cold peel, some one will be hot, it will tell you on their instructions.
@@HustleNinjas thanks!
What's best affordable printer
Is there a cheaper option then graphtec cutter?
This one is a bit cheaper: ruclips.net/video/tFg7ZbWcg8E/видео.html&lc=UgzIMCzAXNHA1lOijtF4AaABAg
And then you have the cameos and what not, I'm not a huge fan of them, but they are cheaper.
Hi! Thanks for this tutorial, it really helped me. However, I have a question. I am a beginner in this topic and just starting heat transfer. I make T-shirts using vinyl (Stahls foil), but I have trouble transferring it. I use 100% cotton T-shirts, I follow the manufacturers' recommendations (temperature and heating time). However, when I remove the transfer (transparent) foil - using the cold and warm method, the transparent (transfer) foil pulls the vinyl very much, as if the vinyl would not stick well to the T-shirt. You on your film take it off with lightness, with one movement of your hand, as if the transparent film could fall from blowing air. And for me it sticks very strongly to vinyl. Why, what could be the cause? The thermal transfer press (ordinary, relatively cheap) heats up well. What am I doing wrong?
i got the same problem. its like the vinyl does not even wanna stick to the shirt
Pinoy Pride on that shelf hehe thank you for this video!
What’s the exact name for this vinyl and of what temperature u should be pressing
Very nice. Haven’t seen anything like this. Would it look as good if it were multi-color? Thanks 🙏🏾
Where do you get your shirts and sweaters?
alphabroder.. sanmar.. ssactivewear
why noone aswers the question where to get that vinyl paper, or how to get thendesign on them, and how to start
The puff vinyl link is pinned in the top comment. You get the design on the vinyl through the cutter software of your cutter. For instance I have a cricut so I design my image in canva or photoshop then upload that image into cricut design space. You start with getting a cutting machine and learning how to create designs or buy them from Etsy or other online sources. Hope this helps.
Loving that Adobe software....definitely going to give it try. I can always come here when I need advice on how to work with these selections. Thanks and God bless! 🤗
Yo Rich! I'm going to buy your course but I have one question. Are you gonna release a new one soon about new information you've learn?
If needed, yes, but at this time there is no new info that needs to be added.
wow i want to try that puff heat transfer vinyl wonder where can i buy this?
Hi Rich thanks for the video I was suggesting the other day. Awesome and informative as usual keep it up 👍
What is the ideal temperature for vinyl ?
Dependent on the vinyl, it’ll come with instructions
@@HustleNinjas cricut premium vinyl has no instructions on the packaging or anything.
Im not familiar with cricut vinyl but make sure it’s heat transfer vinyl and not decal vinyl
Great video i must say bro hope everyone is taking advantage of this but before i go
Im starting my heat transfer business on a low budget and would like to know if i can use the HP 2775 PRINTER TO USE WITH MY INKJET HEAT TRANSFER PAPER??
I hope you insert in video the set up of the settings of CE 6000-60 GRAPHTEC
Do you have a non-vinyl option for white ink designs?
i have try the puff vinyl by polyflex on a hoodie and its amazing no complaints
Hey Rich! Any recommendations on a Heat Press like the Wala? Auto open, clam shell with a drawer. They discontinued the WalaPress that you have in this video :[
They have the larger size available: bit.ly/wala-presses
Rich Brotherman Again a great knowledge content your providing to us
Hope more vids on T shirts soon!!
Is there a difference between doing HT from supacolor? And doing vinyl?
You're limited on design intricacy and colors with heat transfer vinyl, while you can do full-color intricate designs with supacolor.
Would it matter if I get a 15 inch graph tech if I'm only making clothes or is the bigger machine necessary?
I have a bigger cutter, but majority of the vinyl I use is only 15” wide
That puff vinyl look pretty cool. Great video! Thanks for sharing.
With the heat transfer vinyl , does it last on T-shirts’ for a while after washing it several times ?
Yes
Question: the sticky/clear sheet is that already part of the mint vinyl or you have to add that on the colored part before you cut????
Thanks
Already part of it
@@HustleNinjas thanks so much!!!!!
howdy,,,what is the force setting on your cutter?
My main problem is getting the shirt right on the press what did you mean parallel to the press
Does it make it easier to weed the vinyl under the hot heat press?
Yes, when the bottom platen is warm and you put the vinyl on top of it, it will help heat up the vinyl and make it easier to weed.
Hey man do you have a suggestion where I can get some decent quality shirts and not just entry level gilden but not to expensive?
Where to buy blanks:
ruclips.net/video/wdrNG43njZQ/видео.html
When I use dis vynl the designs always smush no matter wat pressure it’s on any tips, what am I doin wrong?
What kinda vinyl are you using? Where you get it from
Can someone explain to me please. If i want to print a graphic I made in photoshop it;s colorful and I don't want it to be a square do it uise printer and then cutter or how does it work?
Hey, it’s absolutely amazing! Can you please help out with puff vinyl, where I can find it on internet, price and colors?
Great job! Thanks
WALAKut Puff Vinyl:
bit.ly/walakut-vinyl
Great video! The puff vinyl looks amazing!
Did you use a gildan tshirt?
nice typ on weeding whike warm.
first time I hear that, but is so obvious.
Damn, now i wanna press shirts. Can you do crew neck sweaters amd hoodies with these machines or only cotton Ts?
Yes, hoodie:
ruclips.net/video/5qiNWlccMNQ/видео.html
Do you have issues with customers when vinyl on cotton?, mine have issue when vinyl on cotton, after few wash using washing machine, it became vinyl not hold on cotton, easily peel, but vinyl on microfiber, polyester, honeycomb shirt work great
No issues... sounds like you either have a heat press issue or cheap vinyl
@@HustleNinjas ,what your heatpress temperature and time for vinyl
@@hamizishah3177 it depends on what the heat transfer vinyl recommends, they're all different, but you'll want to make sure your heat press is reading accurately with a temp gun or sensor and make sure the pressure is good.
You motivate me a lot bruh
Can you do puff with any image or only simple images?
Simple
What kind of vinyl did you use on the first tee shirt? Was it Siser stretch?
I think it is, but just tried to look online and couldn't find it. I've had it for a long time so I cannot remember to be honest.
What were your pressure and speed settings for your HTV?
medium to heavy pressure - 10-15 seconds
@@HustleNinjas sorry, I didn’t explain myself. I was talking about the graphtec blade setting. I usually cut my decal vinyl at pressure 10-11
@@Obeysuls96 speed 15 cm/s, force 17.. this will also depend on how much your blade is sticking out of the blade holder
How did u get the logo
Dude that puff vinyl!! What!?!? Never seen that!!
How has this held up in the wash?
where can I get puff vinyl from, I'm from the UK
Link in pinned comment. I'm not sure if they ship to UK. You can check.
@@HustleNinjas whats the link pls
@@charminesesay5217 bit.ly/walakut-vinyl
Is that puff vinyl maybe also there from other companys? Maybe with shipping to EU? Because everything is sold out on the website.
I really liked the sweatshirt. Is it a Bella + Canvas? I am new to sweatshirts and I am unsure which brand to purchase. Love all your content. I have binge watched almost all your videos. They are easy to watch and I like the laid back atmosphere. Have a good week. 😺
G180 gildan
@Hustle Ninjas have you had any issues with Cutting master 4 working in AI. My cut/plot option is gone since the 2020 update? A lot of others having the same problem.
I have to save the design to an EPS and move it back to the Graphtec software to cut.
That puff vinyl is Sick! Im trying to come up in the t shirt game and get to your level of sales. Great video. Jus Subscribed!
What paper do you use
Lol aye man I enjoy watching yo stuff, thanks for the entail dawg especially that puff vinyl that’s hard 👌🏾
I bought the WalaPress because of you! Can you make a video on different vinyl brands?
I'll see if I can do that, but for the most part I just use Siser easyweed.
can you do a tutorial on using sublimation transfer vinyl aka Siser or Glitter vinyl
I'll look into it.
Can you layer several colors of the puff vinyl?
Not too sure, but I would think you would have to transfer them all to one carrier sheet first.
@@HustleNinjas Thanks bro!
Rich!!! Whts the best paper to use?
In regards to which process?
What degrees did u put that on?
I didn't know about puff HTV, will buy some through your affiliate link, thanks for the heads-up 😁👌
it will take your brand next level
Where did you get that he transferred from
Liked and subd been screen printing dtg and vinyl pressing for years.Keep the info comin fam
A lil secret on puff use fleece garments
Who have the other cutters and how you like it?
How much that cutter?
How do I make cut master 4 work with my illustrator it’s not popping up when I try to print from illustrator
Thank you. Your videos are very helpful.
What heat did you have your heat press at?
Heat is dependent on the media being pressed. Media being pressed will typically come with directions on heat temp and times.
@@HustleNinjas thank you for your reply!