Hello and thankyou. The video is well shot and well explained. My father is a 69 year old retired motor mechanic with a 1999 E46 318i. He changed the brake pads but was telling me how the light was still on. I emailled him a link to this video, he watched it, learnt how to install the new sensor, learnt how to reset the light and is now very happy! Job well done, thanks for taking the time.
Thanks for the explanation. I replaced the sensor but the light was still in. I was a bit frustrated about it. All I needed to do was to put ignition and wait for 30 sec. after that the light went out. Thanks
If you still have the sensor then you can just cut the end piece off and splice the two wires together and that will shut the light off with no need to buy a new sensor. It'll also last a long time. A little more reliable than using the wire in the female connector hooked up to the car. It'll keep the weather out better.
Awsome vid, I just purchased a used BMW and this light was on, thanks to your vid I was able to see the wear on the front left sensor and get it replaced. the light stayed on so I am working on the right rear sensor currently! Ill let you know if this fixes the bright light that bugs the piss out of me, thanks again make more vids like how to turn of the check engine light due to o2 sensor!....great job thanks again!
Thanks for posting.Very informative. mines just come on this makes perfect sence to me bimmer forums kinda go around the houses. saved me sh*t loads of faffing about. will fix at weekend.
Wow very good video..!! I changed my sensor twice but d light still on when I reset my 08/528xi. So I'm gona test Ur way to see if it goes off. Thank u very much..
Cool cool, just go the back done and the light went off!! wicked, thank you!!! Any ideas on checking transmission fluid lvl on a 2000 328i and fixing a leaky power steering thing that takes transmission fluid? jackass I got the car from put power steering fluid in it instead of transmission...and it leaks....ugh!!!
hi, i have 2 lights, the red handbrake always on and the dsc triangle, is this the blue speed sensor or the black brake pad sensor ????? thanks fo response erveryone.
Yo estoy preparando mi coche para circuito y calle. Necesito hacer desaparecer las luces de ABS, control de tracción, se puede hacer con este mismo método?
domo arigatou from japan. my light just came on half an hour ago. dont know how much that sensor is here in japan, but im daaaaaaamn sure its not gonna be ten bucks. by the way, i have a 2000 320. what kind of pads should i use? and what brand rotors? my car has only 42,000 kilometers on it, but when i eyeballed the pads last week, they were still at 50%, but the rotor may need to be replaced. so im just gonna wait til i get close to metal and replace the pads and rotors.
thanks for the comment. I don't really have a preference on brake pads. Why do you think your rotors are bad? Usually you can go through a few pad changes before the rotors need to be touched.
Better get the old wire, cut it to have like 3-5 cm long cable from the plug out, stip it, roll together, seal it with electrical tape or shrink tube, plug it back anf your connector wont be full of mud, dust, etc. But this sensor is really cheap, replace is the real solution after you replaced your break pads.
Thats it, how to switch the light of that's telling you the part of your car that stops you is fucked. That's handy for people selling cars who cant be arsed to fix the brakes.
JAhs Daddy Could be an open circuit (broken wire or connector not pushed all the way in) or crud or corrosion in one of the connections. I know this is six months old, but maybe it's still useful to someone.
Can anyone tell me why my Park light stays on all the time!! my battery gets drained every two days now and it it's the third new Battery by the AA in about a year and half, they said they could not see anything draining it, but I noticed this light on all the time now!! any clues how to make it go off!! as usual which is supposed to be 15 mins after switch off ignition, cheers
I don't know if you found your answer, but the light only stays on for 15minutes after you lock your car, it goes off after that. That light itself cannot drain your battery anyways if left on all night. Either you have a bad battery or something else is zapping your energy.
Thanks Joey, it is okay now it has actually stayed off, but If I don't use my car for 3 days It won't start, I had two new batteries from the AA about a year ago and they checked on a call out once and said the battery is fine!! so still not sure why it is doing it, maybe a parasitic drain somewhere!!
only a radio I put in but it looks like it could be the battery, as I took for MOT yesterday and get ball joint done and this morning my car would not start it normally last 3 days, I think the AA gave me two crap batteries
Did you have a bypass installed on the radio? You have to make sure people know what they're doing when messing with BMW electronics, luckily the people I was dealing with was smart enough to say NO and sent me to an authorized aftermarket installer (with insurance).
Hello and thankyou. The video is well shot and well explained. My father is a 69 year old retired motor mechanic with a 1999 E46 318i. He changed the brake pads but was telling me how the light was still on. I emailled him a link to this video, he watched it, learnt how to install the new sensor, learnt how to reset the light and is now very happy! Job well done, thanks for taking the time.
Great tips here, and your other videos I had the privilege to watch. Thanks for sharing your knowledge .....
Thanks for the explanation. I replaced the sensor but the light was still in. I was a bit frustrated about it. All I needed to do was to put ignition and wait for 30 sec. after that the light went out. Thanks
Perfect, I have been doing brakes since before I could drive, all the sense in the world
The reset worked perfectly ! Thank you.
Thanks for the video.!! I got a 323i last week and the brake light was on I did this to both sensors and now its off!
Cool instructional video you made it looks so easy I need to replace mine soon
Thanks, I needed this info.
Good job
If you still have the sensor then you can just cut the end piece off and splice the two wires together and that will shut the light off with no need to buy a new sensor. It'll also last a long time. A little more reliable than using the wire in the female connector hooked up to the car. It'll keep the weather out better.
Thank you so much, didnt know i had to wait before i start the car. Problem solved!
Helped a couple of times thank you
Thanks for the video. To the point. Great job!
Worked for me so great video, many thanks !!
Great info and video, thanks for sharing.
Awsome vid, I just purchased a used BMW and this light was on, thanks to your vid I was able to see the wear on the front left sensor and get it replaced. the light stayed on so I am working on the right rear sensor currently! Ill let you know if this fixes the bright light that bugs the piss out of me, thanks again make more vids like how to turn of the check engine light due to o2 sensor!....great job thanks again!
Thanks mate. That light was doing my head in
excellent video, thank you very much!
Ignition on without starting for about 20 seconds to reset, thanks man
than you for the tutor. you save the day. thanks
Wow~~ thanks. I have 2003 BMW 530i with the brake pad warning lit. This will fix my problem. Good day!
Thanks for posting.Very informative. mines just come on this makes perfect sence to me bimmer forums kinda go around the houses. saved me sh*t loads of faffing about. will fix at weekend.
thank you very much !
greetings from Belgium, cheers ! :)
***** Happy to help out, thanks!
Wow very good video..!! I changed my sensor twice but d light still on when I reset my 08/528xi. So I'm gona test Ur way to see if it goes off. Thank u very much..
whats the difference between getting the amber light then the red light? has the wear sensor got two stages ??
Good info, hey man if you're reading this can the brake pad sensor trigger the ABS and brake light too??
Great sharing indeed!
Great video, thank you. Finally got my light to go out.
Cool cool, just go the back done and the light went off!! wicked, thank you!!!
Any ideas on checking transmission fluid lvl on a 2000 328i and fixing a leaky power steering thing that takes transmission fluid? jackass I got the car from put power steering fluid in it instead of transmission...and it leaks....ugh!!!
THANK YOU VERY MUCH JENNIESGARAGE!! YOU SAVED MY ASS BIGTIME, BMW WANTS OVER 100 FOR THE SENSORS, BUT YOU SAVED ME!
Good stuff, I hit a pot hole and the light came on. Will try your suggestion, thanks.
You have any temporary solution for the abs,dsc and brake red lights?
would this be the same on a 2010 model.friends car.he has a brake pad light on..thanks
useful vedio.... well I've got bmw 320i m 2003 it's attraction control is on plz help ....
Thanks, helped a lot
Glad you got your car sorted out, thanks!
Dude, I might as well do the brakes if I took the tire off.
This could be necessary to do even after the brakes are changed.
i have an e46 M3, im not sure if the brake light reset procedure is the same as for the 325 shown here.
Does the senor keep the light on the rear windshield on?
So u pull that jumper cable off or leave it on.
I have a 2001 325xi 5 door station wagon and the 3rd brake light on the back isnt working. Is there any video how to replace it or troubleshooting?
Thanks man
hi, i have 2 lights, the red handbrake always on and the dsc triangle, is this the blue speed sensor or the black brake pad sensor ????? thanks fo response erveryone.
brilll vid thanks
Glad it helped
thanks.very helpfull.wondered why that damned light stayed on
I'm glad the video helped out, thanks.
Yo estoy preparando mi coche para circuito y calle. Necesito hacer desaparecer las luces de ABS, control de tracción, se puede hacer con este mismo método?
Nice will do this noww
hi guys my fuel consumtion sesor stuck on 12.5liters wont go down or up any advice
Thanks for the tip.
Glad it worked for you!
***** byd 7h9bgvh8#tytcn6kgffcg6rr nim7ykfycvngcvhh o😳😲😒😧 😼😃😯😥😦 g7cccjjj
@jenniesgarage ..hello, I have tried Ur method but it stills didn't clear d light . I was wondering if there is a fuse for brake sensor? Please help
my x5 "BRAKE" light just came on,the one left of the abs light. what exactly does this mean, that i need new pads or is this a different problem
I tried shorting out my front sensor as shown but light remained on and it was the front that caused it as the sensor was touching the rotor
will this work on a 325 xi?
What kind of wire could it be?
What do I do if the light doesn't go out?
Do you figure out how to fix the BRAKE light? I have the same car same year same issue, can't figure it out
Only light on for me is brake in yellow. What does that mean?
nice vid man, will be sure to never buy a car off you! :)
I did my brakes, guess I have to replace the sensor to....derp.
HI!!
Step by step pleas!! After desconection sensor..
Thanks!
Arica - CHile
I had a blowout on my e46 on the rear right tire and I have the red BRAKE on and the yellow ABS is it damaged because of the blow out?
Was it due to the blow out?
hi can you do the temporaliy fix for the abs light
I only have the light that says “brake” on. How can I turn that off?
domo arigatou from japan. my light just came on half an hour ago. dont know how much that sensor is here in japan, but im daaaaaaamn sure its not gonna be ten bucks. by the way, i have a 2000 320. what kind of pads should i use? and what brand rotors? my car has only 42,000 kilometers on it, but when i eyeballed the pads last week, they were still at 50%, but the rotor may need to be replaced. so im just gonna wait til i get close to metal and replace the pads and rotors.
thanks for the comment. I don't really have a preference on brake pads. Why do you think your rotors are bad? Usually you can go through a few pad changes before the rotors need to be touched.
Go with Zimmerman rotors and jurid pads.
what about e36?
When you put on your brakes, your life is in your foot's hands...
nice
that was clever
my 528it 2000 got the brake light on yellow so as the abs light at all time. what could that be
Did you find the solution to it ? I'm having the same problem
its your front left wheel sensor. the blue one in the vid
Better get the old wire, cut it to have like 3-5 cm long cable from the plug out, stip it, roll together, seal it with electrical tape or shrink tube, plug it back anf your connector wont be full of mud, dust, etc. But this sensor is really cheap, replace is the real solution after you replaced your break pads.
Just use the old sensor wire to jump wires together
Thats it, how to switch the light of that's telling you the part of your car that stops you is fucked. That's handy for people selling cars who cant be arsed to fix the brakes.
neil law or you could just check the brake pads
I replaced both sensors & did the steps in the video, however the light remains on. What could be the problem?
JAhs Daddy Could be an open circuit (broken wire or connector not pushed all the way in) or crud or corrosion in one of the connections. I know this is six months old, but maybe it's still useful to someone.
use the wires in the old sensor and mask them together does the same trick.
And sensor is not a problem to replace or drive with sensor, the problem is the sensor turns on warning light on dash at 25% pads left! I
My (BRAKE) light its on and it turn from red to yellow why and how can I reset it
I'm having the same problem did you ever fix yours man ?
Can anyone tell me why my Park light stays on all the time!! my battery gets drained every two days now and it it's the third new Battery by the AA in about a year and half, they said they could not see anything draining it, but I noticed this light on all the time now!! any clues how to make it go off!! as usual which is supposed to be 15 mins after switch off ignition, cheers
I don't know if you found your answer, but the light only stays on for 15minutes after you lock your car, it goes off after that. That light itself cannot drain your battery anyways if left on all night. Either you have a bad battery or something else is zapping your energy.
Thanks Joey, it is okay now it has actually stayed off, but If I don't use my car for 3 days It won't start, I had two new batteries from the AA about a year ago and they checked on a call out once and said the battery is fine!! so still not sure why it is doing it, maybe a parasitic drain somewhere!!
Star Light You have anything aftermarket installed on/in the car?
only a radio I put in but it looks like it could be the battery, as I took for MOT yesterday and get ball joint done and this morning my car would not start it normally last 3 days, I think the AA gave me two crap batteries
Did you have a bypass installed on the radio? You have to make sure people know what they're doing when messing with BMW electronics, luckily the people I was dealing with was smart enough to say NO and sent me to an authorized aftermarket installer (with insurance).
Yea I woke up today n all 3 of those lights are on
no, thank you.
2001
Nice. Those sensors are a pain on the ass.
Your video is blurry AF. You also really should give a time frame for the light to go out, mine took about 15-20 seconds.
We don’t need these break pad sensors we will here the noise when it’s time to replace them.
so just to let you know this guy is incorrect. the light that went out was for the brake fluid level. the "BRAKE" light is the pad indicator light.
Man they really tried to rip you off! Try online about 20 bucks for front sensor,
useful vedio.... well I've got bmw 320i m 2003 it's attraction control is on plz help ....