bons freins pas chers faciles à raccourcir. J'ai utilisé une bonne pince coupante et une clé plate, bien serrer pour écraser l'olive, mais pas trop quand même. Bien remplir d'huile la poignée comme montré sur le tuto, perso j'en ai rajouté un peu du flacon
Hi, I'll unfortunately have to reply in English! We do recommend to use a similar hose cutter as shown in the video. We have the exact one from the video that can be bought via our dealership partners. The product number for that is: 0321233 The issue with some "normal" cable cutters or even less specialized cutting pliers is that they will squish the brake hose rather than doing a clean cut.
Où trouver cet adaptateur pour le tournevis dynamométrique ?? (visible à partir de 2min12s : ruclips.net/video/JNSYtDeMQL8/видео.html ) J'ai beau chercher, je ne trouve pas. ça porte peut être un nom spécifique ?
Je n'ai trouvé que le tournevis en entier : bikeimport.ch/shop/product/25852/search_magura/Drehmomentschl%C3%BCssel%204%20Nm%20inkl%208%20mm%20Steckschl%C3%BCssel%20Aufsatz/
It's possible to shorten the brake hose without needing to bleed the brake afterwards, but you should always check if bleeding is necessary by checking the bite point. To be on the safe side, you can use our Fast Bleed method to bleed your brakes afterwards: ruclips.net/video/l8UF37hrpg0/видео.html (The Fast Bleed method will only give a good result if the air is primarily located towards or in the master).
bons freins pas chers faciles à raccourcir. J'ai utilisé une bonne pince coupante et une clé plate, bien serrer pour écraser l'olive, mais pas trop quand même. Bien remplir d'huile la poignée comme montré sur le tuto, perso j'en ai rajouté un peu du flacon
Bonjour comment dois-je faire si mon étrier arrière ne passe pas avec le cadre puis-je utiliser une patte de déport ?
Feel free to contact us on Facebook, Instagram, or via the contact page on our website if you need help with a particular issue!
salut je retrouve pas de coupe cable similaire a celui de la vidéo, n'importe quelle pince coupante peu marcher?
Hi, I'll unfortunately have to reply in English! We do recommend to use a similar hose cutter as shown in the video. We have the exact one from the video that can be bought via our dealership partners. The product number for that is: 0321233
The issue with some "normal" cable cutters or even less specialized cutting pliers is that they will squish the brake hose rather than doing a clean cut.
@@MAGURAPassionPeople ok i’ll see for that thanks
Où trouver cet adaptateur pour le tournevis dynamométrique ??
(visible à partir de 2min12s : ruclips.net/video/JNSYtDeMQL8/видео.html )
J'ai beau chercher, je ne trouve pas. ça porte peut être un nom spécifique ?
Je n'ai trouvé que le tournevis en entier : bikeimport.ch/shop/product/25852/search_magura/Drehmomentschl%C3%BCssel%204%20Nm%20inkl%208%20mm%20Steckschl%C3%BCssel%20Aufsatz/
Bonjour faut il purger le frein ensuite ?
It's possible to shorten the brake hose without needing to bleed the brake afterwards, but you should always check if bleeding is necessary by checking the bite point. To be on the safe side, you can use our Fast Bleed method to bleed your brakes afterwards: ruclips.net/video/l8UF37hrpg0/видео.html (The Fast Bleed method will only give a good result if the air is primarily located towards or in the master).