Thank you so much! My steamer on barista pro did not work and water leaked from the bottom. I thought i need to send it to repair or opening the machine my self to see what’s wrong with it, After watching this video I unscrew and cleaned it and it works! Thanks so much!
Hi Hoon! Many thanks! This one's been so helpful! I thought I should send mine up for repair, but... it's already resolved! Thanks again and best regards from Spain! Have a good day!
My Barista Express have the problem of weak steam power and lag of stop ,even i stamp the hole with needle stil not fix Until i saw your video and give a try, i also add a step soak in the water with cleaning power. WAH LAH~ steam just return to normal and strong than before! Thank you so much for the video
I had the same issue but what I also noticed is that during the steaming process the group head also pours some water out and the steam is still not powerful enough. What could be the problem here?
I have the same issue. I’ve done all the cleaning recommended here. Plus changed filter and flushed. Still spits and sputters then stops again. Doesn’t say needs descaled.
dude, you just blew my mind use the pokey tool to unscrew the steam wand head. I took it off and cleaned the rubber seal and my issue of the steam wand was still blowing air after I turned off the steam wand lever. Now it stops the steam as soon as turn it off. thought my machine was broken i'll sub now..
Hi I have this issue: when pulling a shot some of the water would dispense via the steam wand, and This resulted in a really poor quality espresso shot and the coffee became pretty disgusting. Kindly advise which part causing this problem. Thanks
Hi Hoon. Hope you are well. I have the Barista Express. Was wondering if that steam tip will fit on the express? I know you have both of them, so would be much easier for you to check if you could. I would really like to use that 4 hole nozzle instead of the little 2 hole nozzle. Thanks for the great channel!
Good advice on cleaning the tip! But not such a great idea testing the steam output with your finger. My guess is that you had a burn blister on that finger the next day.
HOOOOON! You're one of my favorites on RUclips! Thank you for all the great troubleshooting, cleaning, and coffee-making advice videos!
I've had my espresso machine for 3 years and never done this little nifty trick. Worked like a charm! Thanks for sharing.
I watch all your videos and you single handedly have taught me everything to know about my breville espresso machine thank you Hoon! 🙏🙏
Thank you so much! My steamer on barista pro did not work and water leaked from the bottom. I thought i need to send it to repair or opening the machine my self to see what’s wrong with it,
After watching this video I unscrew and cleaned it and it works!
Thanks so much!
Hi Hoon! Many thanks! This one's been so helpful! I thought I should send mine up for repair, but... it's already resolved! Thanks again and best regards from Spain! Have a good day!
Thank you, solved a steaming wand issue where the steam kept coming from the tray. Once cleaned the head it was all good.
Thanks God I found your video because I was just about to return the coffee machine. So I did everything u said and my steam are back again.
You are a lifesaver. Thank you so much. I thought something like this would be too hard to fix on my own, so thanks so much for the insightful video.
Glad it helped!
Thanks for your videos watching from Scotland 🏴 and very helpful with my machine :)
My Barista Express have the problem of weak steam power and lag of stop ,even i stamp the hole with needle stil not fix
Until i saw your video and give a try, i also add a step soak in the water with cleaning power. WAH LAH~ steam just return to normal and strong than before! Thank you so much for the video
Thank you, you really saved me when my steamer stopped working
Thank you so much for posting these incredibly helpful videos! Fixed my frother thanks to you. Keep up the fantastic work!
I had the same issue but what I also noticed is that during the steaming process the group head also pours some water out and the steam is still not powerful enough. What could be the problem here?
Did you find anyway to fix it? Because I have the exact same problem with my machine
I have the same issue. I’ve done all the cleaning recommended here. Plus changed filter and flushed. Still spits and sputters then stops again. Doesn’t say needs descaled.
Anybody find out? Mines doing the same and I just bought it yesterday
Hoon you just saved our caffee milk :) Thanks again for all your videos
where to get the needle
dude, you just blew my mind use the pokey tool to unscrew the steam wand head. I took it off and cleaned the rubber seal and my issue of the steam wand was still blowing air after I turned off the steam wand lever. Now it stops the steam as soon as turn it off. thought my machine was broken
i'll sub now..
I just got a used machine. Is the thump thump sound during steaming normal?
Thanks! My Barista express work is fixed now!
Thanks alot. I never checked my tool box before.
Hi
I have this issue:
when pulling a shot some of the water would dispense via the steam wand, and This resulted in a really poor quality espresso shot and the coffee became pretty disgusting.
Kindly advise which part causing this problem.
Thanks
Thank you for this video almost cried thinking my machine broke 🎉
Hi Hoon. Hope you are well.
I have the Barista Express. Was wondering if that steam tip will fit on the express?
I know you have both of them, so would be much easier for you to check if you could.
I would really like to use that 4 hole nozzle instead of the little 2 hole nozzle.
Thanks for the great channel!
Hi my washing machine Venezia Breville doesn’t the pover turn on
I had the same pumping sound while steaming, is that normal? Thanks
But if it's not the tip, what will be the next step to do? My steam wand is super weak and I just descale the whole barista express not long ago
Hi! Could you solve it? I have this problem now
Totally unrelated Hoon, auto tamper video.. what was coffee, grinder, tamp lbs/pressure, did you wdt? TY cost of tamper beautiful crema ..
??
This helped a lot!! Thank you mate!
Thank you so much! Your videos are so useful.
Thank you so much 😊 Your video helped me solve the problem.
Good advice on cleaning the tip! But not such a great idea testing the steam output with your finger. My guess is that you had a burn blister on that finger the next day.
I tested with my finger yesterday several times, and several times since I become a barista...no blisters evere
Awesome.. Thanks for this. It fixs mine stright away.
Thanks that seems to be all I needed to do. 😊
Bang this worked like a wonder! Thank you
Just tried and it work for me thanks
Great tips thanks so much
Regarding the unblocking tool... Check the other end. It contains a secret ohhhh!
I’m back in business, thanks!
Thanks you are the best is the second time you help me
Just had visitors and tried to make them a good latte and failed because my steamer was not working so disappointed
I have 3rd machine already. Every time something different broke. If that happens with that 3rd machine I will ask them for refund.
Fixed mine, thanks!
It works well!!! Thanks
You are a life savour
Thank you Sir,
Thanks mate
Thank you
I have the same unit
Hi Hoon… can I ask you where can I find the needle that u are using? Got the same problem with my Barist the steam wand not working.🥹
thanks for help boss
Thank you so much man you saved my machine 🫡