I had a Yamaha YZ 85 2015, gold cylinder top, öhlins front and rear suspensions, fmf exhaust and a race carb... Around 48 hp! I sold it for around 44.000 Norwegian Currencies and bought myself a welder, a anglegrinder, a welding table and a lot of other shit. I have free metal because my grandfather used to work at a metal dealer so i can get great quality metal for free! I'm building a buggy right now. I just finished the chassis and i'm about to install the suspensions! :D Nice video man
i agree with Austin Beals... try a new set of reed valves. (not expensive, or difficult) the motor is definitely not hitting its full power band. also yes Zack Pack is correct, it seems rich. keep up the great backyard projects!!
hey bro i appreciate wot you did but i would advise you to put in 100% coolant as if you mix antifreez with water it reacts with the aluminium as it gets so hot and leaves a calcified white residue im not criticising i think your sick and do a great job and your projects are sick just tryin to help you out .thx
i think you maybe have to change the o rings between the motor and the exhaust pipe. my 85 sounded like that before and i only had to change the o rings because it was leaking a little bit and after that it runs perfect!
Seems to run ok. A little boggy on the low end. what are you mixing it? Also your jetting seems off. Main jet seems ok, but your pilot which controls the low end is to rich. Either that or you need to move your clip on your throttle slide. also probably wouldnt hurt to find factory settings on your air fuel mixture screw because i garentee thats not adjusted correctly. I just had to jet my bike not that long ago. Its a long and frustrating process but ones you get it dialed in its like a whole new bike.
i live near brown mountain ohv trails. i ride my Suzuki DRZ Dual sport up there sometimes! fun place to ride! one year me and my friends took some modified mowers up there and we made it all the way to the top of the mountain. other people on dirt bikes and quads were following us and cheering us on lol
You're dumb. There are two types of motorcycle riders. Those who have fallen,and those yet to fall. It's bound to happen for whatever reason. And you're not dumb. :)
Are you using gopro branded cameras only. Im looking to get a clone because im on disability cant afford gopro orices. I found a few between 100$ ish and 280$. The 280 is still slot but uts compared to new hero 6. Looking for at the very least 4k 30fps with stablization. Want 60fps or better gor 1080p. Without break bank. Ill save for a gimble after that to make shots even more stable
When I built my computer I felt the same way I was right in ur position where u have been working on something so long and it’s just not working and ur worried u broke something expensive or that ur going to have to spend more money and all u wanna do is just get it to work
Oh, some advice also, when you do your top speed run, be careful they're not designed for full revs long distance runs, it'll either get too hot or blow up quicker than you think. I'm not trying to tell you what to do, just some advice from my experience or riding and building them.
congratulations on your first build of a motorcycle ! You have done what maybe 1% of the population has done abd that is taking apart and putting together a motorcycle engine that was literally a basket case ! Enjoy it ! It sounds a little rick what is the % of 2 stroke oil in your gas ? You may want to look that up because when its all right it will give you a thrill !
iv had 3 yz 85s and a cr 85 and on those it feels like your flying but they top out at 35 stock i put a ton of motor work in the race bike and still only got 45 just wait till you get to a big bike with motor work and always wear a helmet the first thing you hit when you go down is your head
nice job! it sounds like u may be having some jet issues or your runing your fuel to rich. it should pull power wheelies on pavement when u hit the gas. but as far as your riding your doing a great job. get some gear because i know from experience you can really get hurt even on little bikes. keep up the good work!
I have been racing/riding for 10 years an you can change up and down gears with out using your clutch I only use it to stir or start that's it and its a 2stroke so you should be holding the throttle on the stopper every gear
Shit yah!! It's a keeper, LOL. Fuck the neighbors, I'd just drive it like it is just to piss them off. I got a 90cc Baha, It hauls my 240lb ass around pretty good. Strong little motors probably because of the gearing in the gearbox. Look forward to the speed test. Hope you keep it and fix it up.
by me people love that i ride my mini bike and such, but then i moved and its a bunch of cranky old people and now i cant ride it so i got rid of my mini bike. i miss it so much lol
Ha. I live in Raleigh. I took me all of 5 minutes to get pulled over and have my bike impounded. But what part of Raleigh do you live in, as that changes things up?
i live in iowa. here it depends on the cop and how they feel that day. sometimes they will impound it and then other days they let you go and let ya ride it home.
2stroke makes it fast, when my bike runin like shit i did a top speed and it did 55, also your pretty good at driving! looks like it's running pretty bad because my bike when running right picks the front tire off the ground when I shift, I got the wrong gas mixture so it does not run very well be careful when you get it running right it's insane. best of luck!
The reason why your bike picks up after you shift is you are doing fast shifts and you are just gassing it after you shift and maybe your to far back on your seat
Tom Leblanc i sit touchin the damn tank, if you check my channel out youll know why. I shift as fast as possible but not always give throttle, at 3/4 throttle it picks the tire up.
you could mig weld it if you have aluminum wire or stick weld it together if you have the right rods but yea you would definitely want to tig weld it cause there will be hardly any slag but you could always carry the side case down to a welding shop and have it done for little to nothing cause it is barely an inch long
get u a cell phone mount an put it on the bike an then get the speedo app for ur cell it works with the gps in the phone an they do a good job an give u an idea how fast ur going an u can check it with the speedo in ur car or truck to see how close it is good luck
Hey bud love this build serious im having a similiar build at the momment just started a kawasaki kx 1990 build if your interested on my channel its only new channel so go easy on me ha.Hope you get more bikes in the videos to come..
Great job on building this up and getting her going, i had a similer project with a kx 85 and those 2 stroke engines can be very tricky to deal with, ive just finished customising a pitbike as my latest project...got some vids on my channel feel free to check it out and/or subscribe if any1 intrested....lots more content coming soon !!!
You have people flip you off around where you live? I live in a much more up-tight old white people kind of neighborhood and I still get more positive reactions than negative while riding a go cart around and shit. Hopefully you have some good trails nearby, right?
who else thinks this guy and carsandcameras should build the most badass gokart
Yes that would be awesome
Oh yeah I agree
hell yea brother
Also grind hard plumbing co they do really good worl
I had a Yamaha YZ 85 2015, gold cylinder top, öhlins front and rear suspensions, fmf exhaust and a race carb... Around 48 hp! I sold it for around 44.000 Norwegian Currencies and bought myself a welder, a anglegrinder, a welding table and a lot of other shit. I have free metal because my grandfather used to work at a metal dealer so i can get great quality metal for free! I'm building a buggy right now. I just finished the chassis and i'm about to install the suspensions! :D Nice video man
Open up the bands dude
Let it warm up for abit before riding
Poor engine...
i agree with Austin Beals... try a new set of reed valves. (not expensive, or difficult) the motor is definitely not hitting its full power band. also yes Zack Pack is correct, it seems rich. keep up the great backyard projects!!
hey bro i appreciate wot you did but i would advise you to put in 100% coolant as if you mix antifreez with water it reacts with the aluminium as it gets so hot and leaves a calcified white residue im not criticising i think your sick and do a great job and your projects are sick just tryin to help you out .thx
Do you have to mix gas on that bike or is it separate
+rather B welding how much gears has it ?
i think you maybe have to change the o rings between the motor and the exhaust pipe. my 85 sounded like that before and i only had to change the o rings because it was leaking a little bit and after that it runs perfect!
Try hitting the power band you'll wheelie
BIG BEAR_17. He not a rider bru
how
and your shifting to fast those bikes love to be opened up in the power band
carb needs jetting before you melt a piston :|
why would he melt a piston if it’s running rich
Seems to run ok. A little boggy on the low end. what are you mixing it? Also your jetting seems off. Main jet seems ok, but your pilot which controls the low end is to rich. Either that or you need to move your clip on your throttle slide. also probably wouldnt hurt to find factory settings on your air fuel mixture screw because i garentee thats not adjusted correctly. I just had to jet my bike not that long ago. Its a long and frustrating process but ones you get it dialed in its like a whole new bike.
What country do u live in ?
is this the small or big wheel version?
Trippy 420 looks like small wheel
i live near brown mountain ohv trails. i ride my Suzuki DRZ Dual sport up there sometimes! fun place to ride! one year me and my friends took some modified mowers up there and we made it all the way to the top of the mountain. other people on dirt bikes and quads were following us and cheering us on lol
Danger Dave there's more then one brown mountain there is on in NC and one in Tennessee
Danger Dave from the looks of it he is by brown mountain Tennessee
i haven't seen a full video but does the 5-6 gear work?
Great job. Get yourself some motorcycle riding gloves,and always wear a helmet.
i was riding my friends drz 400 on the road and came off going 50 mph with no shirt or gloves or helmet and nothing happened
You're dumb. There are two types of motorcycle riders. Those who have fallen,and those yet to fall. It's bound to happen for whatever reason. And you're not dumb. :)
you are right cam torrie. ill never forget the day i fell of my bike doing a wheelie and detroyed my hands because i had no gloves on.
squid.
???
Sounds a lot better man good job
Are you using gopro branded cameras only. Im looking to get a clone because im on disability cant afford gopro orices. I found a few between 100$ ish and 280$. The 280 is still slot but uts compared to new hero 6. Looking for at the very least 4k 30fps with stablization. Want 60fps or better gor 1080p. Without break bank. Ill save for a gimble after that to make shots even more stable
did u put a fresh spark plug in it
pull your clutch in when you let of the trottle. 2 strokes do not get lubricated while enginebrakeing and will sease after a wile of doing it
u still got that lifted go kart??
you should try searching ebay for the kick starter
When I built my computer I felt the same way I was right in ur position where u have been working on something so long and it’s just not working and ur worried u broke something expensive or that ur going to have to spend more money and all u wanna do is just get it to work
U might need a new spark plug my yz85 does that when it needs a new one
Might need rejetting for it to run better.
You might burn out that top end, depending on how hard you ride it
brown mnt north Carolina?
Oh, some advice also, when you do your top speed run, be careful they're not designed for full revs long distance runs, it'll either get too hot or blow up quicker than you think.
I'm not trying to tell you what to do, just some advice from my experience or riding and building them.
That's a nice chipper truck in the back =P
Will you sell it?
what is the top speed?
Cool 😀
Hey bud don't shift as early. To avoid bogging shift down when coming to stopping or dead stop
nice bike
congratulations on your first build of a motorcycle ! You have done what maybe 1% of the population has done abd that is taking apart and putting together a motorcycle engine that was literally a basket case ! Enjoy it ! It sounds a little rick what is the % of 2 stroke oil in your gas ? You may want to look that up because when its all right it will give you a thrill !
Thumbs up if this dude reminds you of gary lewis lol love all ur vids man!!
improve your driving and make the most of the yz sounds incredible
there is nothing wrong with bike its just the nature of a 2 stroke. Also is 4th and 5th working yet?
New plug or coil needed i think by the sound of it .
Hmm, not sure if it was you feathering the throttle or if it was the bike hesitating but other than that it sounds fine dude.
Do u still have that bike
iv had 3 yz 85s and a cr 85 and on those it feels like your flying but they top out at 35 stock i put a ton of motor work in the race bike and still only got 45 just wait till you get to a big bike with motor work and always wear a helmet the first thing you hit when you go down is your head
fmx Bmx no way. only 35?
fmx Bmx no they dont they top at 65-66 mph bro not 35 my dude
Killa 701 nope about 65 - 68 mph
all you guys need to look up the factory specks its 30
Mtb Ridingog Good lord I had an 85 and could go about 50 but 60+ is more in the 125 area
BUEN VIDEO
nice job! it sounds like u may be having some jet issues or your runing your fuel to rich. it should pull power wheelies on pavement when u hit the gas. but as far as your riding your doing a great job. get some gear because i know from experience you can really get hurt even on little bikes. keep up the good work!
Pretty good riding for being your 4 or 5th time
Are you getting a stater for it because I have the Sam bike as you I have a lot of bikes
I have been racing/riding for 10 years an you can change up and down gears with out using your clutch I only use it to stir or start that's it and its a 2stroke so you should be holding the throttle on the stopper every gear
nice bike...u got a good deal
Really nice work, so far, just take baby steps until you know the bike better & get all the bugs worked out.
Try getting a carb rebuild kit!
Shit yah!! It's a keeper, LOL. Fuck the neighbors, I'd just drive it like it is just to piss them off. I got a 90cc Baha, It hauls my 240lb ass around pretty good. Strong little motors probably because of the gearing in the gearbox. Look forward to the speed test. Hope you keep it and fix it up.
Your gonna need a new piston before you know it gotta shift my man
just make sure you pull in the clutch when your not giving it gas so u don't engine brake
Why do you bump start it.
Casey Denbesten he doesn't have a kick start lever
nice video bro
dude round where I live shoots a sling shoots at me when I ride my 2 stroke bicycle past
brown mountian? u must be in NC bro thats where i live
Shane Steffey there is more then one brown mountain there's a brown mountain Tennessee
Shane Steffey. Me to
Hey dude , nice video but I really think you should work on your shifts
by me people love that i ride my mini bike and such, but then i moved and its a bunch of cranky old people and now i cant ride it so i got rid of my mini bike. i miss it so much lol
It sounds like you need a hotter burning spark plug. That or you were just going easy
I live around brown mnt I've been there once it's a dangerous place if you're not careful
I am going to have to show u how to ride a dirt bike my friend
Sounds like you didnt turn off the choke
Can you push start that too
You know when you get in the throttle and it starts to spit and sputter and a high rpm is the power band trying to kick in
+rather be welding do u still have the dirt bike
ever been caught riding on the streets? what are the laws in Raleigh North Carolina?
Ha. I live in Raleigh. I took me all of 5 minutes to get pulled over and have my bike impounded. But what part of Raleigh do you live in, as that changes things up?
i live in iowa. here it depends on the cop and how they feel that day. sometimes they will impound it and then other days they let you go and let ya ride it home.
+Eaves Street Oh cool. cops around here are kind of dicks. he said he lives around Asheville NC.
ohhh i heard of that brown mountain park. / he seems pretty sharp on building and fixing things.
2stroke makes it fast, when my bike runin like shit i did a top speed and it did 55, also your pretty good at driving! looks like it's running pretty bad because my bike when running right picks the front tire off the ground when I shift, I got the wrong gas mixture so it does not run very well be careful when you get it running right it's insane. best of luck!
I foresee motovlogging! LOL
The reason why your bike picks up after you shift is you are doing fast shifts and you are just gassing it after you shift and maybe your to far back on your seat
Tom Leblanc i sit touchin the damn tank, if you check my channel out youll know why. I shift as fast as possible but not always give throttle, at 3/4 throttle it picks the tire up.
lol no these little bikes are supposed to do that.
dude I live about 5 minutes away from brown mountain and just got a new yz 85
when r you gonna post more videos of the dirt bike
you should wrap the exhaust
hell yeah good vid keep them coming
is it for sale lol
More please ~ More Ryan !!!!
it could use a top end that's what the bogg your hearing probably the piston ring
I think it needs a little bit more of tuning it didn't seem like u hit power band
Would you sell it
Hey check if the reeds are good
How tall are you
damn, I gotta get my 125 running again
just needs tuned
Bro hit the power band let the thang have some fun
about that crack in the motor case you could just weld it togheter
It's aluminum so he would need a tig welder. And I don't think he has one.
+Nate Nan well if he ever gets one he could
you dont absolutly need a tig welder it would just be eisier
you could mig weld it if you have aluminum wire or stick weld it together if you have the right rods but yea you would definitely want to tig weld it cause there will be hardly any slag but you could always carry the side case down to a welding shop and have it done for little to nothing cause it is barely an inch long
jb weld
get u a cell phone mount an put it on the bike an then get the speedo app for ur cell it works with the gps in the phone an they do a good job an give u an idea how fast ur going an u can check it with the speedo in ur car or truck to see how close it is good luck
Hey bud love this build serious im having a similiar build at the momment just started a kawasaki kx 1990 build if your interested on my channel its only new channel so go easy on me ha.Hope you get more bikes in the videos to come..
I ride at brown mtn all the time it’s fun
you need to let it warm up more
you can definitely go faster than 50
god dammit. Now i wanna go ride but my pitbike's rear axle's bearing is broken-.-
olli lehtonen buy 1
olli lehtonen buy 1
Great job on building this up and getting her going, i had a similer project with a kx 85 and those 2 stroke engines can be very tricky to deal with, ive just finished customising a pitbike as my latest project...got some vids on my channel feel free to check it out and/or subscribe if any1 intrested....lots more content coming soon !!!
You are supposed to power shift not stay in the same gear just a tip
that is the reason why it sound like that
it might be the gas you put ???
I don't like 2 jokers because loud, fuel wasting, oil/gas mixing I prefer my simple 4 stroke
His horrible shifting tho but great job keep up the good work
wear dirtbike gear dude I broke my leg on my yz one day and from then on I wore gear
Was it power band
You have people flip you off around where you live? I live in a much more up-tight old white people kind of neighborhood and I still get more positive reactions than negative while riding a go cart around and shit. Hopefully you have some good trails nearby, right?
i had one old guy flip me off while i rode buy but he doesn't like me anyways the rest of my neighbors are cool about it
+rather B welding I had a woman jump out in front of me going like 25, then tell me that my actions were going to get somebody hurt
+rather B welding well won't to know what I do when people look at me I'll say you wish you hade a dirt bike
feminism at the best
+JKGamer you
My mates cr85 does 75 easy so when you can ride you should able to do atleast 70 on it