You can shutdown VTX from your radio. Check manual for GOKU F405 HD 1-2S 12A ELRS AIO V2 and check 9V Electronic Switch section at the bottom of the page
Yes absolutely it will be super cool! And yes we need a battery strap, I made one for the old flylens but It was weird having to go around the USB port, ended up using a rubberband
Happy you reviewed this drone, I was just looking at it on Flywoo last week, didn't even know about it. I have the Flylens85 and want this one too, but gonna wait for O4 for sure
For an outdoor cinewhoop, which would you recommend, this or an geprc cinelog20? I would really fancy a durable, human-save and light drone, that makes little noise and makes great videos...
Recommend everyone goes into ESC configurator and change the setting to protect the ESC's as they burn out very easily. Flywoo are fantastic for support.
My friend, what’s going on with your control? It’s not like usual. Are you worried about the VTX temperature, causing you to play so quickly? Btw thx for video ❤
@tornadoytp che esperienza hai? Normalmente consiglio Avata 2 goggles e FPV controller, è il kit con cui impari prima di tutti e ti permette in poche ore di fare video fighi, se lo rompi hai DJI care
I appreciate all your videos. You make me want to buy them all lol received my Speedybee Bee25 but waiting in batteries. Just ordered the BetaFPV Pavo 20 Pro Nightfire last night. Now I want this too plus geprc 35v2 and iflight 5” nazgul
Omg, so nimble, so capable, makes me wonder why did I bought the Avata2 xD Love the videos lately, many amazing drones and reviews. Have You got your hands on Mario Fold 8 by any chance?? :]
I really really liked this drone, you got 10 minutes of flight time with the 1000mah 2s? Really? Did I see it right? Edit: no, I didn't see it right. 10 minutes was the "on" time, not actually flight time. But still a very good drone.
Am I off-base or would 1103 11000kv motors be better for a cinematic drone? I built what i s basically a HappyModel bassline for freestyle with 1103 motors and it stood out to me that Flywoo chose higher KV motors for the Flytimes 85, which are less efficient. They are slightly lighter though, I suppose. 🤷♂️ My cinematic build will be: -Flytimes 85 frame/TPU -Goku F405 ELRS V2 -O4 Air Unit -T-Motor F1103 11000KV motors
Now I can see what you meant by the battery holders being a pain in the ass hahahaha 😅 I got my flylens 85 with two 1000mah, so I have to change the 750 that comes pre installed on it... and so far... my fingers are hurting and I'm still struggling with it! Omg hahahaha you should make a tutorial on how to change the battery holders and not die trying hahahaha😂
What an amazing drone, truely fantastic. It gives me an idea for You, that You could make a list at the end of the year of recommended drones, some kind of tier list maybe. That would be amazing. Classes, like best freestyle drone, best cruiser ¯\_(ツ)_/¯
You can shutdown VTX from your radio. Check manual for GOKU F405 HD 1-2S 12A ELRS AIO V2 and check 9V Electronic Switch section at the bottom of the page
"I didn't see a chicken explode" quote of the stream
Hahahahahahahahahahha I found them pecking at the lipos in the bag i left on the ground
Man you’re pushing out reviews like crazy, love that! Keep going mr Rimzler 🚀
You’re cranking out videos!! 🔥🔥🔥
happy to see the review of this..Thanks
One caution - if you brick the ELRS Rx, that's it - no way to unbrick it. (I just finished soldering on a Tracer Rx.)
Awesome video!!!!!! AMAZING! =) Great great great great great!
This drone is absolutely wild! Will post some cinematics with it!
I'll be getting the frame and making it a 3s for more punch. But I would like to see a battery strap option.
Yes absolutely it will be super cool! And yes we need a battery strap, I made one for the old flylens but It was weird having to go around the USB port, ended up using a rubberband
never seen you crash so much in a video. great review as always
Happy you reviewed this drone, I was just looking at it on Flywoo last week, didn't even know about it. I have the Flylens85 and want this one too, but gonna wait for O4 for sure
That's alot of freebies🤙🏻 been watching your reviews ever since I entered FPV hobby🔥🔥
I'm having difficulty keeping up lately, too many products coming out, but it's an honor to be doing this reviews!
which whoop would you recommend for carrying a naked gopro and staying under 250g ? i love your reviews!
There is a TPU print to mount a strap for flylens85 that should fit (mounts in the same slot), I prefer that.
Can't wait for O4. with this combination it be just perfect!!
I wonder when that's gonna happen, I was thinking to buy this but I might wait. When you think it will happen?
@ in few weeks now according to rumours
@ImanIsmael oh no way! You're a boss thank you for the reply 🙏🏼 🙌🏻
What is O4 going to have? Any major leaps?
@@neuroticsdubstep comes with 2 versions Pro & Lite. Pro should be better than Avata 2 camera, which is already comparable to Gopro.
nice Drone i like it👍👍👍
Already one of my favs
No chickens were harmed in the making of this video
Never harmed chicken...yet🤣
Not with drones at least🍗
I'm curious about the new BT3.0 connectors if you swapped the XT30 out and fly some of those packs might get some more punchy more light weight?
Maybe save a couple grams from the battery yeah! But like 3/4 if you don't have the bt3 ecosystem don't know if is worth the hassle
If im flying near people indoor in a house for a wedding, is the flylens or the flytimes a better choice?
If you are mostly indoors and near people maybe the flylens
I came to see the flywoo, I stayed to see the chickens get chased 😂
Ahahahaha I gotta start getting more chicken then🤣🤣🤣
For an outdoor cinewhoop, which would you recommend, this or an geprc cinelog20? I would really fancy a durable, human-save and light drone, that makes little noise and makes great videos...
This looks awesome dude. Beautiful flight characteristics for something so small.
How do you think the camera protection is?
Recommend everyone goes into ESC configurator and change the setting to protect the ESC's as they burn out very easily. Flywoo are fantastic for support.
What do I change ?? And where?? With my betafpv 75 and 85 I often have the problem that the esc is dead
@@Woodyyes-- ramp ESC protection in ESC configurator from memory. Dont know about it in betafpv but its a common problem with flylens85.
Flytimes over the Flylens 85?
Was going to get the naked Flylens 85 but its sold out. Would really appreciate your opinion
Fly times flies better, more efficient And lighter, but slightly less protected for indoor, I like it better
Cant decide to get this or wait for the o4 air unit! Nice review 👍🏻👍🏻
maybe 04 will be easy to swap out
Thanks for this video and chickens but where is your cat? ))
Ahahahhaha we eventually found it, master vanisher🤣🤣🤣
I have a question, is there possible to put a thumb pro camera on it?
Thank you very much for your video.
It is designed to carry one.
My friend, what’s going on with your control? It’s not like usual. Are you worried about the VTX temperature, causing you to play so quickly? Btw thx for video ❤
SEI ITALIANO!?!?!?!?? grande!
Ahahaha italianissimo🍕🍕🍕
@@Rimzler che kit mi consiglieresti per iniziare? hai fatto qualche video a riguardo? perché non trovo nulla :(
@tornadoytp che esperienza hai? Normalmente consiglio Avata 2 goggles e FPV controller, è il kit con cui impari prima di tutti e ti permette in poche ore di fare video fighi, se lo rompi hai DJI care
@@Rimzler sono nuovo, devo ancora prendere un drone e pensavo che il cetus fpv kit fosse il più economico/migliore per iniziare
@tornadoytp diciamo che se riesci a partire in digitale non devi poi ricomprare tutto, consiglio il neo allora oppure l'usato sempre digitale
I appreciate all your videos. You make me want to buy them all lol received my Speedybee Bee25 but waiting in batteries. Just ordered the BetaFPV Pavo 20 Pro Nightfire last night. Now I want this too plus geprc 35v2 and iflight 5” nazgul
Go for the Bee35, its much better than the Geprc 35 or Pavo35!
@@schweizerluchs7146 That Bee35 looks pretty good. What do you like more about it than the Pavo35?
Omg, so nimble, so capable, makes me wonder why did I bought the Avata2 xD
Love the videos lately, many amazing drones and reviews.
Have You got your hands on Mario Fold 8 by any chance?? :]
Thank you for the review. Wow the diffrence between the stabilized Video and the DVR is crazy would you be willing to share the Gyroflow settings?
Subbed n 🙌 👌🏼 🎩 blessup from #Scotland
Thank you so much! I'm planning to visit Scotland hopefully soon!
with such a perfect place to do race tracks, you should at least try some racing. It is lots of fun! :)
Love your videos!
Do you ever try locking your exposure on the o3?
Rarely, only when needed and when I'm shooting!
Give those chickens a break😂 nice video though👍
What controller are you using
90% of the times the DJI FPV controller 2
Do you know if it’s possible to fly without the prop guards?
Yes you can just unscrew them
Love flylens :)
Yeah that's what I want to see companies aspire to, light drones that work fenomenally
I really really liked this drone, you got 10 minutes of flight time with the 1000mah 2s? Really? Did I see it right?
Edit: no, I didn't see it right. 10 minutes was the "on" time, not actually flight time. But still a very good drone.
I wonder how will it be with an 1s walksnail vtx and a insta go 3s camera
Am I off-base or would 1103 11000kv motors be better for a cinematic drone? I built what i s basically a HappyModel bassline for freestyle with 1103 motors and it stood out to me that Flywoo chose higher KV motors for the Flytimes 85, which are less efficient. They are slightly lighter though, I suppose. 🤷♂️
My cinematic build will be:
-Flytimes 85 frame/TPU
-Goku F405 ELRS V2
-O4 Air Unit
-T-Motor F1103 11000KV motors
Is it digital and if so what goggles work a best with it.
Will the O4 require these models to have a different design to hold it?
They need to set the VTX on a pitt mode switch to turn the VTX off.
does this work with the dji controller 3 and goggles 3
Amazing chicken chase
What goggles are u using
Chicken chase! haha
It's a standardized test ahahah
just ordered mine
@rimzler Are they using motor plugs or did they direct solder?
Direct solder.
Moltisantiiiiiiiii 🎉
I cannot apply discount code:/
Ne too
What's the range on this drone?
Great review. Looks like this frame will get stuck in trees even better than a traditional whoop, lol.
Would this #drone work the new dji goggles v3? Ty peeps 🎩 ☆
It works with the goggles 3, not yet with the n3
Ty its the newer cheaper ones u get in tge neo bundle was hoping to buy and thought they made get an update?, that possible? Ty again ✌🏻@Rimzler
They will most probably make an update but sadly it's not out yet, keep you posted!
I crashed it on the concrete from 2 meters high and the aluminum propeller protector and the frame where the engine is attached were bent
Bom,ho capito ,dopo il Nazgul 5 eco mi prendero' questo :D
Now I can see what you meant by the battery holders being a pain in the ass hahahaha 😅 I got my flylens 85 with two 1000mah, so I have to change the 750 that comes pre installed on it... and so far... my fingers are hurting and I'm still struggling with it! Omg hahahaha you should make a tutorial on how to change the battery holders and not die trying hahahaha😂
Tree love
ha! seriously though - thanks for the crashes. I was wondering how this drone would hold up.
Remove the aluminium parts and this thing would be so light
So this is meant to get hung on a tree branch. ...😂
facts
What an amazing drone, truely fantastic. It gives me an idea for You, that You could make a list at the end of the year of recommended drones, some kind of tier list maybe. That would be amazing. Classes, like best freestyle drone, best cruiser ¯\_(ツ)_/¯
$400 ?
That's outrageous.
that's dji for ya
Wow, most crashes ever...it seems like the drone is much tougher than it looks👍👍👍