I’m sure we’d all love to see a video/review on 46v and 46g alone. I know they give a lot of people some serious trouble. We’d all really like to see your take on those paint codes specifically! Love your work man keep it up!
I use 50 micron strainers with certain paints. They are hard to get (not to many places offer them) They do wonders for paints with strange pigments that don't won't dissolve.
Hey mate, great channel and I have learnt lots. I’m going to attempt a respray on a Vw beetle. I noticed you use lots of different brands of paint but can you recommend a good brand for 1st time painter for epoxy through to clear coat that is available in the Perth area? Thanks again Chris
Lovely finish gunny what a cracking job well done this is why iam subscribe to your channel loads of helpful information are you going to do the top 10 base coat paint guns
What is your preferred gun for sealer? I feel like alot of my peel is due to my sealer. I'm spraying a tekna copper with a 1.3, using ppg sealer. Any tips?
May i ask do u turn that air valve on the sagola all the way open or is it in he middle. I'm having difficulty with mine. The valve on bottom of gun? Thanks!
Hi Gunny, great video as always mate I've always wanted the Sagola 4600 but for some reason I never got one, they do look nice guns and lay the clear very flat it's just a shame that the prices are so high these days. My Sagola RC1 reg also went wrong a while back, I was wondering why my finish was peeley but it turned out that the RC1 was reading high🙄 You were using PPG in this video Gunny so this must have been at your other shop as you are using Standox now🤔don't tell me you have moved again😨😂John UK
@@leahmay1011 I've been using the 1.3XL, beast of a gun. Please take some advice, don't buy one until something new comes out in about 15 days. (I'm not meant to say that)
Hey Gunny! We paint furniture here in the states with precat lacquer your tips and advice have really helped the last 3-4 years , eventough we spray very different products the advice still transfers. Love my flg5's and my prolites as well. Even have perfected my craft with the Supernova novas. I as of this week have bought a sagola 4600 one for base, one for clear. Thanks for all the tips and hints! Just searched your page for a paintsuit couldn't find one.. Just out of stock?
@@fredg4785 I recommend the ANi gauges, be a little careful with the thinners, it can seep in and ruin them, but if taken care of properly they'll last years. $23 USD www.spraygunsdirect.co.uk/product/ani-pressure-gauges-regulator/
I’m sure we’d all love to see a video/review on 46v and 46g alone. I know they give a lot of people some serious trouble. We’d all really like to see your take on those paint codes specifically!
Love your work man keep it up!
THE 4600 IS GOING FOR MORE LIKE 700 USD.. STILL A GREAT GUN.. GREAT VIDEOS ALSO..
I love Sagols 4600s ! It's a bazooka ! 💥👍🏼
Thanks Gunny!
Hell yea brother love my sagola trophie trucks edition 👊
Keep up the vids.. I learn something every time I watch them.. good work
I use a Sata 5000 RP with a 1.4 for the candy. VM350 in 530 clear.
I use 50 micron strainers with certain paints. They are hard to get (not to many places offer them) They do wonders for paints with strange pigments that don't won't dissolve.
Another lovely job mate👍🏼
Would love a video on how to control dust ‼️‼️‼️ thanks‼️
Hey mate, great channel and I have learnt lots. I’m going to attempt a respray on a Vw beetle. I noticed you use lots of different brands of paint but can you recommend a good brand for 1st time painter for epoxy through to clear coat that is available in the Perth area? Thanks again Chris
Lovely finish gunny what a cracking job well done this is why iam subscribe to your channel loads of helpful information are you going to do the top 10 base coat paint guns
That looks clean
Looks amazing
Good review Gunnie…..
Comprei uma á dias e ainda não usei. O que recomendas para começar a usar?
On another note of feedback the intro song has held up I believe. And keeping it the same shows how original your content is in a good way cheers
46v soul red is a cool colour. Its less expensive than candy aswell.
The 4600 is a nice gun! . The ring that's on the trigger to move the fluid tip annoys the crap out of me though 😳 (I'm a bit ocd with cleaning) .
What is your preferred gun for sealer? I feel like alot of my peel is due to my sealer. I'm spraying a tekna copper with a 1.3, using ppg sealer. Any tips?
Could we get a review on the finer core guns by meiji?
May i ask do u turn that air valve on the sagola all the way open or is it in he middle. I'm having difficulty with mine. The valve on bottom of gun? Thanks!
Hello mr.gunman 1 ❤ youu...😊
Hi Gunny, great video as always mate I've always wanted the Sagola 4600 but for some reason I never got one, they do look nice guns and lay the clear very flat it's just a shame that the prices are so high these days. My Sagola RC1 reg also went wrong a while back, I was wondering why my finish was peeley but it turned out that the RC1 was reading high🙄
You were using PPG in this video Gunny so this must have been at your other shop as you are using Standox now🤔don't tell me you have moved again😨😂John UK
hello, can you give me the model and marking of the compressor you use?
Para capas de esatinta cuantas manos serecomiendan
Is there a Gunman edition Flg5?
What's your ideal wet on wet sealer gun for flat finish
I've been using the sagola, but mainly because it doesn't have any plastic seals and wet on wet is a bit rough on guns
@@TheGunmanChannel .3 fluid cap
@@leahmay1011 I've been using the 1.3XL, beast of a gun. Please take some advice, don't buy one until something new comes out in about 15 days. (I'm not meant to say that)
@TheGunmanChannel thanks man
Your shop switched from Standox to PPG?
That must be a different shop. The mixing room doesn't look anything the one with standoblue
@@iEvocatehe said he re arranged the mixing room in another video
When are you gonna tell us about switching to ppg??
I just did 😁
👍👍
😍
Hey Gunny! We paint furniture here in the states with precat lacquer your tips and advice have really helped the last 3-4 years , eventough we spray very different products the advice still transfers. Love my flg5's and my prolites as well. Even have perfected my craft with the Supernova novas. I as of this week have bought a sagola 4600 one for base, one for clear. Thanks for all the tips and hints! Just searched your page for a paintsuit couldn't find one.. Just out of stock?
Sata RPS Adaper #3 125252
First..from indonesia...
👌👌👌👌👌👌👌👌👌👌👌👌💪💪💪💪💪💪💪💪💪💪💪💪💪👍👍👍👍👍👍👍👍👍👍🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
I just left a shop that was a sand pit... I watched this guy do 200 nibs on a rear bar. What a joke this shop was lol
It's crazy, there's just something about this shop. There's dust floating everywhere
From Malaysia
Fc
First😂
Is spraygunsdirect legit ? Anyone know how much shipping is to the US ?
They're definitely legit, ship fast, like 2-3 days to the USA, generally they use DHL express and it's about $25-30 USD delivery cost.
@@TheGunmanChannel which regulator do you recommend?
@@fredg4785 I recommend the ANi gauges, be a little careful with the thinners, it can seep in and ruin them, but if taken care of properly they'll last years. $23 USD
www.spraygunsdirect.co.uk/product/ani-pressure-gauges-regulator/