if you set the wring voltage only in settings based on on your current voltage the voltmeter level in display will be wrong. and there are tendency your you will shut down when you reach the cut off voltage
hello Angelo, Need some thought. I have blade 10 that broke. Motor controller front and rear is dead. I have have 2x 1200w 60v motors, and one 60v 20.8ah battery. What can I upgrade, What motor controller, main wire, display that I can upgrade to?
@@JamesAngeloTV sana gumana. Problema ung pangtubeless valve tumatama sa motor. Pang may innertube lang kasi pwede ung hub ko. Salamat sa sagot sir. Gawa ka din video sir ng wiring para sa turn signal na 12v power supply ang gamit.
@@JamesAngeloTV ahh akala ko nagawa nyo talagang tubeless un 😁😁😁 may inner tube pa din pala. Thank you sir. Ako lang din kasi gumagawa sa scoot ko. Para malagyan ko na din ng turn signal na sa external batt ung supply. Thank you sir.
@@JamesAngeloTV yung nka tayu lang po range nsa 45k and up ang bilis ng takbo..pang service lang po sana sa work..pero ms mganda po DIY kung ma tulungan nyu po ako kung my listahan po kau ng pwede ko e bili sa pg assemble
hello angelo, I have one question, I have a teverun fighter 11, I'm interested in what is the difference when it is set to 72V - 60V and 48V?
if you set the wring voltage only in settings based on on your current voltage the voltmeter level in display will be wrong. and there are tendency your you will shut down when you reach the cut off voltage
hello Angelo, Need some thought. I have blade 10 that broke. Motor controller front and rear is dead. I have have 2x 1200w 60v motors, and one 60v 20.8ah battery. What can I upgrade, What motor controller, main wire, display that I can upgrade to?
you cab avail the blade gt v2 controller set check in ali express
Sir panu nyo po nagawang tubeless yang split rim?
kelangan mo lang bro ipress ng husto ang gulong para malock ng ayos. mas madali kung may katulong ka pag install
@@JamesAngeloTV sana gumana. Problema ung pangtubeless valve tumatama sa motor. Pang may innertube lang kasi pwede ung hub ko. Salamat sa sagot sir. Gawa ka din video sir ng wiring para sa turn signal na 12v power supply ang gamit.
@30blindbandit dapat interior tlga gamit hindi pwede ang valve lang sisingaw
@30blindbandit cge bro sa mga susunod na video salamat sa suggestion
@@JamesAngeloTV ahh akala ko nagawa nyo talagang tubeless un 😁😁😁 may inner tube pa din pala. Thank you sir. Ako lang din kasi gumagawa sa scoot ko. Para malagyan ko na din ng turn signal na sa external batt ung supply. Thank you sir.
Hi, can you put the purchase links please?
which one do you need bro
hi sir, pwede po mg tanong mgkano po sakali na gastoa mo sa ebike DIY at anong pwede ko simulan pg mg DIY at cnu pwede assistant ko sakali..ty po❤
anung klaseng ebike ba bro?
@@JamesAngeloTV yung nka tayu lang po range nsa 45k and up ang bilis ng takbo..pang service lang po sana sa work..pero ms mganda po DIY kung ma tulungan nyu po ako kung my listahan po kau ng pwede ko e bili sa pg assemble
@@IannBorlaza bili ka nlng frame ng ninebot max tapos controller set motor hub kung dual need mo mononim
10inch ba yung tire niya sir suitable ba yan sa 10x ko hehe salamat
yes bro pwede
Tapos pwede ko rin ba gamitan ng inner tube na 10x2.5 ?
@eancristopherfrancisco1270 pwede bro dapat tlga may inner tube
Can you share the link of the wire/csble protector link?
sorry i don’t have link i bought only in bikeshop that cable cover