hello buddy Have a good time and happiness It is not possible to connect several cameras to one esp32cam board. If you want to have several cameras, it is better to use esp32cam boards separately. 😉
I tried this with a newer model of the esp32 cam... They suck. they do not make good security cameras, the software is terribly slow. the image is bad and if you crank up the resolution, the refresh takes forever. if you want to grab one picture that is ok. anything else no way. the motion detection is so slow by the time you are notified they are already gone. do not waste your time.
hello my friend good time In order to make a good security camera, due to the problems of the slowness of the software and the lack of clarity of the image, I mentioned the following below. 1. You must know the resolution of your camera and then enter the same resolution in the software. You can connect different ov cameras and... there are good quality cameras on the socket. 2. As long as the camera does not have the power and that resolution, you should not enter any resolution in the software. This slows down the software and image updates. 3. When you connect a high-resolution camera, you can increase the resolution in the software to get the highest quality image at normal speed. 4. You can use the antenna socket that is placed on the module and connect it to that antenna with a small conversion and increase its range, while don't forget to put the resistance on the external antenna pin first. I hope this explanation will solve your problem.
good camera, but why not can connection ip whit other device, no working my phone, no working my win10, but working only whit raspberry pi4 table computer, if connect web browser ip addres, and not working VLC any device, add ip and say MRL not can connect. or somethik. i not know. i has add program whit raspberry pi to in camera and add SSID etc and wrking well raspberry pi and web browser, but not whit VLC
Hello buddy Have a good time and happiness This is a local camera. That is, when the camera is connected to the desired Wi-Fi, the other device must also be connected to the same Wi-Fi to see the images. And after entering IP in the browser, you can see the camera image. 😉
Nice video i appreciate
How can i connect multiple camera do i need to mske changes to the code lr just upload one at a time
hello buddy
Have a good time and happiness
It is not possible to connect several cameras to one esp32cam board. If you want to have several cameras, it is better to use esp32cam boards separately. 😉
I tried this with a newer model of the esp32 cam... They suck. they do not make good security cameras, the software is terribly slow. the image is bad and if you crank up the resolution, the refresh takes forever. if you want to grab one picture that is ok. anything else no way. the motion detection is so slow by the time you are notified they are already gone. do not waste your time.
hello my friend
good time
In order to make a good security camera, due to the problems of the slowness of the software and the lack of clarity of the image, I mentioned the following below.
1. You must know the resolution of your camera and then enter the same resolution in the software. You can connect different ov cameras and... there are good quality cameras on the socket.
2. As long as the camera does not have the power and that resolution, you should not enter any resolution in the software. This slows down the software and image updates.
3. When you connect a high-resolution camera, you can increase the resolution in the software to get the highest quality image at normal speed.
4. You can use the antenna socket that is placed on the module and connect it to that antenna with a small conversion and increase its range, while don't forget to put the resistance on the external antenna pin first.
I hope this explanation will solve your problem.
good camera, but why not can connection ip whit other device, no working my phone, no working my win10, but working only whit raspberry pi4 table computer, if connect web browser ip addres, and not working VLC any device, add ip and say MRL not can connect. or somethik. i not know. i has add program whit raspberry pi to in camera and add SSID etc and wrking well raspberry pi and web browser, but not whit VLC
Hello buddy
Have a good time and happiness
This is a local camera. That is, when the camera is connected to the desired Wi-Fi, the other device must also be connected to the same Wi-Fi to see the images. And after entering IP in the browser, you can see the camera image. 😉
'promosm'