Modifying My Evo 8 - GrimmSpeed Manual Boost Controller

Поделиться
HTML-код
  • Опубликовано: 11 окт 2024
  • Modifying my Mitsubishi Evo 8 MBC install by GrimmSpeed.
    Questions about buying an Evo? Msg me on Instagram @thatwillsanders
    **********************************************************************************
    _The Basics of Car Washing:_
    -Bucket(s) amzn.to/2YhCEbx
    -Grit Guard(s) amzn.to/2VRBaHw
    -Microfiber Towels -amzn.to/2VrqBLV
    -Wash Mitt - amzn.to/2Yg5vNG
    -Soap (safe in sunlight) - amzn.to/2V9ArNI
    Waterless Wash/Drying Aid: amzn.to/2KVgs3h
    -Regular Rubber Hose (Not the same I have but a good brand): amzn.to/2VMof9W
    -Hose shut off valves: amzn.to/2H9TPWY
    **********************************************************************************
    ____Pressure Washer System____
    -Small Pressure Washer: amzn.to/2Zs5bvk
    -Blue Hose: amzn.to/2U3U4aJ
    **********************************************************************************
    ____Wheels____
    -Wheel Brush: amzn.to/2H8C8H9
    -Lug Nut Brush Kit: amzn.to/2ZruqOg
    -Wheel Speed Brush: amzn.to/326M8bP
    -CarPro PERL: amzn.to/2Nts7YQ
    -Foam Blocks: amzn.to/2HopqE4
    **********************************************************************************
    #Evo8 #Evo9 #MitsubishiEvo

Комментарии • 20

  • @shireenparsi7876
    @shireenparsi7876 4 года назад +2

    Thanks for posting and for posting GSDs!!!!!!! I love fast manual cars and pups!!!!

    • @willsanders187
      @willsanders187  4 года назад +1

      Haha no problem! That_Enzo_and_Lotus RUclips channel to see more pups!

  • @audie54cunn
    @audie54cunn 4 года назад +3

    Hey Will, you need diff upper and lower intercooler piping along with different hose clamps... either that or you’ll have boost leak and/or the hose will keep popping off.

    • @willsanders187
      @willsanders187  4 года назад +1

      Lol funny I was planning to talk about that soon. Performance wise they don’t make a lot of difference with a stock/close to stock Evo.

  • @robbieoneill4364
    @robbieoneill4364 4 года назад +2

    Dude your into cars?! Sweet!

  • @migueljimenez6808
    @migueljimenez6808 3 года назад +1

    I have a quick question. So I’m thinking about doing this to my Evo so I can install the ets maf intake and I have the same setup as your vid. Just then cone filter! Anyways did you just cap off the hose that was coming from the intake piping? And when you capped off the stock bcs; did you end up getting a check engine light?

  • @joshuanickoloff2997
    @joshuanickoloff2997 4 года назад +2

    Love your videos

  • @thisguy092
    @thisguy092 4 года назад +1

    You can remove that stock air box bracket completely, the open intake filter will vibrate and puncture on that bracket. Speaking from experience.

    • @willsanders187
      @willsanders187  4 года назад +1

      Not sure exactly which one you mean. My filter is bolted down though so it’s not moving

  • @DanielRodriguez-sl4fq
    @DanielRodriguez-sl4fq 4 года назад +1

    Will you be doing an oil pressure and oil temp gauge install? I’m having trouble finding one that was filmed recently.

    • @willsanders187
      @willsanders187  4 года назад +1

      Not anytime soon. I want to get an all in one system eventually but that’s could be a while

  • @DonkeyzNAction
    @DonkeyzNAction 4 года назад +1

    I have a question. If I’m considering buying an evo and I want to build it, should I get one with low miles like 60k-80k Or one that has 100k plus. Please help me out.

    • @willsanders187
      @willsanders187  4 года назад +2

      If you’re rebuilding why pay for low miles... plus modding decreases value

  • @Smokingaces808
    @Smokingaces808 4 года назад

    Is it safe to be at that boost without a tune?

    • @willsanders187
      @willsanders187  4 года назад +2

      I'm stock boost; technically I'm a little lower.

  • @majinevolution7878
    @majinevolution7878 4 года назад +1

    you are missing one thing in that evo and that is a 6 speed swap.