@@sabirnini4251 its a quote from the movie John Wick describing John Wicks personality. But I used Justin's name at the start instead. Justin is the name of the guy who's channel is Studio G
That paint failure was heart breaking. I understand the frustration when it goes terribly wrong, and I'm glad that you were able to power through the pain. Your skills may be admirable, but your dedication even after the mistakes is what motivates me to keep on building.
People who say that his videos suck are capping because once you watch them there's no denying that they're amazing. Studio G you are doing amazing, keep up the good work and if you ever need a break take it and we'll understand. Have a good day Gunpla builders!
You know you did good when you made someone unintentionally smile, and even cry a little, because this is so beautiful. Never stop building, studio G!!! I wish I lived in Paris so I could see this!!!
Inspiring. The journey of an artist is never easy, especially when the medium involves details as tiny as Gunpla parts and scribing. But each and every detail makes the kit truly shine in ways you won't always expect, making it worth the effort. Thanks for persevering and giving us yet another masterpiece dude. Never stop building.
@@genesis_v2_ its easy dude, you just gotta put two of these * , one at the beginning and one at the end of a word/sentence you want, to turn it into bold letters.
This design is so beautiful, I really like it. Although you are not the most professional and the best, I can say that you are the most dedicated of many builders I have seen. Of course every builder has its own special, but I like your design the most. I am a player who has just contacted gunpla and is also a fan of you. I watch every one of your videos. Thank you for teaching me a lot. I hope your videos will continue. And never stop building !
Justin: Watched ALL the videos and Tutorial Tuesday has been such a blessing. I put down my first scribe lines tonight all thanks to you. Best tip you gave: Don't be afraid to make mistakes. This video shows that advice never loses value.
I use a nail clipper for cutting runners too ! Everyone said I was odd for using it but it works really well and gets really flush cuts, use what works I say
I've been building since the original 80's kits (pre first grade) and I'm still learning and being inspired to improve watching builders like him ( his builds make mine look like they were done by an amateur ) keep building and improving you'll get there one day just remain dedicated to the craft and who knows what may happen in the future ( gbwc entrant one day )
A word of advice with that paper cutter, i used to work with one on a daily basis, be careful with large pieces, those blades tend to cut at an angle the longer you go, and if you dont do it already it would be wise to tape the sheet in place. The weight of the blade handle has a tendency to slighly move whatever you're cutting as you're cutting it. Granted, you're probably the best builder on youtube, so im sure you'll be okay.
I feel your pain so much when you had to sand and repaint most of your parts, I don’t have an air brush yet so this has literally been my life for weeks now with rattle cans, I’ve been waiting till Christmas cause you never know but I feel your pain man, keep up the amazing work!
I just instantly thought of the parable about the great swordsman... that whether you give him a toothpick or a sword he will still know how to slay. And StudioG surely slayed this custom
@@kerythan they used to cut the piece from the spruce using clippers in Japan back in the day... I think he wanted to show that any clippers will do, and that anything is possible.
The last part start 23:56 you guys gonna see the most beautiful part ever. Thats what I called worth my 25:32 watching this video. Love it justin keep it up !!
Happy to see Studio G come back with another custom, even after a long wait it's always worth it. 😎 Even finished my own HG IBO kitbash during the wait.
Wow! Just WOW! I LOVE THIS BANSHEE! I LOVE YOUR WORKS! AND I LOVE YOU BRO! Congratulations! This is another milestone for you, and we all know you deserve it :) We'll wait for more of your work, learnings and success! StudioG for the win!
Speechless. My jaw dropped when you unveiled the final battle and then seeing the little "Coming Next." Surprise was crazy! Super excited for what's coming up next. Amazing, always giving us the very absolute best in your videos.
I just recently bought my first gundam and I started looking through everyone's painting in RUclips. Then I realized, I'm not really patient. So, I'm not sure if I can make mine with all these hours and details like yours. Lol!! Anyway, your painting is awesome.
Ya knocked it out of the park again G, also congrats on having your build displayed on rise of Gunpla(or Gundam? I don't remember), glad to see you grow bigger and bigger each day. I just, have no words to describe this, it's magnificent
That build is well beyond the title of MGEX! This is by far your best build yet I’m glad you made it through the struggles that are the MG Banshee and completed this amazing build!
After watching more and more of your videos I’ve realized you and I have a very similar sense of style when it comes to color schemes. I thoroughly enjoy every video you make!
Yo this was insane!!,you are really dedicated!!,if im the one who try to built this im problably gonna cry in the first day of building it lol.You earned a sub!
Started watching your videos 2 days ago. Now I’m down the rabbit hole 50 bucks. Can’t wait till the rest of my tools come in. Just picked up ageis knight , getting everything off the spru for a test fit.
How do you cut out the entire runner and know what's what? I feel like I'd mix everything up! (I've only built a couple of kits so far so maybe it's just lack of experience)
You are amazing! Your have become everything you have set out to be and you keep going. The builds get better and better each time. Your an inspiration.
What i would give to Build and custom paint, this is all REALLY awesome. This reminds me how much i love Gunpla even if i havent touched it in years!!!
Once upon a time. . .there was a man who call himself StudioG,he's a professional gunpla builder, he loves hia job so much he can spent days creating his own version of gunpla models. One day Bandai released MGEX Unicorn model kit,he was vsry excited because of it. However he noticed that Bandai only release Unicorn version of MGEX so he decided to build his own MGEX Banshee version, he kept on painting,modding and decaling for 27 days straight and uploaded his finishing product to youtube so everyone can see his work. In just a few days, StudioG already got more than millions of viewers and over thousands of comments. Later on that day Bandai sent a CEO out to fly all the way to StudioG's house and fined him 200 million dollars for copyright issues.
Bro really went the extra mile and literally turn his MG to an MGEX, great display of skill, knowledge, equipment and most of all patience. Am new to all this but do you need the softer and setter to apply the decals or can you do without? Also did you use glass paint for painting?
Despite the frustration and mishaps in this build, you turned it into a masterpiece. I might be a little biased bc the banshee is one of my favorite mobile suits but this is my favorite custom build of yours to date. Well done sir!
"Justin is a man of focus, commitment and sheer will"......fantastic job man, the end result is beautiful
@Justine Lawrence R. Banawa yes
He is talking about you... Justine ;)
@@kingarzal1502 I am in confusion
@@sabirnini4251 its a quote from the movie John Wick describing John Wicks personality. But I used Justin's name at the start instead. Justin is the name of the guy who's channel is Studio G
@@robw5088 I know
It’s epic, feel like I've finished watching a movie.
This mans dedication is insane!!!
Thats exactly how i felt...and the last part, i feel like im a waiting for a sequel
Yea i felt tha too
dude you're a monster. look at those details, the explosions, it's freaking glorious
Woah didn't expect to see you here
Wow I love ur animations btw
3th i guess im ur sub
@@samuelhinkle4092 ๆๆไๆๆๆๆๆ444444444444444444
Agree
I love his dedication to every single kit he build. He doesn't even give up although he failed so much in that painting step
That paint failure was heart breaking. I understand the frustration when it goes terribly wrong, and I'm glad that you were able to power through the pain. Your skills may be admirable, but your dedication even after the mistakes is what motivates me to keep on building.
People who say that his videos suck are capping because once you watch them there's no denying that they're amazing. Studio G you are doing amazing, keep up the good work and if you ever need a break take it and we'll understand. Have a good day Gunpla builders!
I felt that on the sanding the colors part....its hell
Ikr
You know you did good when you made someone unintentionally smile, and even cry a little, because this is so beautiful. Never stop building, studio G!!!
I wish I lived in Paris so I could see this!!!
I never thought Banshee could look any better but StudioG made it happen 😎
Good job as always bro, can't wait to see your PG build!! 💪💪
Inspiring. The journey of an artist is never easy, especially when the medium involves details as tiny as Gunpla parts and scribing. But each and every detail makes the kit truly shine in ways you won't always expect, making it worth the effort. Thanks for persevering and giving us yet another masterpiece dude. Never stop building.
Amateurs: Use Nippers
Legends: Use *NAIL CLIPPERS*
I used a *SCISSOR*
@@genesis_v2_ *YOU FOOKIN MADLAD*
@@TomatoChan123 lmao
@@TomatoChan123 btw how did you bold the letters?
@@genesis_v2_ its easy dude, you just gotta put two of these * , one at the beginning and one at the end of a word/sentence you want, to turn it into bold letters.
This was pure Awesomeness Bro! Even more Great Builds and Can't wait for the PG you Unleash!
Bandai: Alright lets make an MGEX B-
This guy: Done
this is just mind blowing.. The nail clippers were actually my first tool when I built my Exia.
This design is so beautiful, I really like it. Although you are not the most professional and the best, I can say that you are the most dedicated of many builders I have seen. Of course every builder has its own special, but I like your design the most. I am a player who has just contacted gunpla and is also a fan of you. I watch every one of your videos. Thank you for teaching me a lot. I hope your videos will continue. And never stop building !
I took 4 yrs off in gunpla building, your video inspires me to comeback in the world of gunpla..
That airbrush fail moment accompanied with the music broke my heart. Felt like I was the one making the kit.
I can't stop watching 😭 it just keeps getting better and better!!
Outstanding job Justin! I admire you for not giving up, well done!
every studio G video released truly reminds me of how much I genuinely love gunpla and gundam a whole
That was more of an MGEX than the actual Unicorn MGEX. Banshee is probably my favourite gundam and this just made my day
Same vanilla banshee and banshee norn is my favorite
This legend proves that no matter how painful or hard it is, to never give up
Justin: Watched ALL the videos and Tutorial Tuesday has been such a blessing. I put down my first scribe lines tonight all thanks to you. Best tip you gave: Don't be afraid to make mistakes. This video shows that advice never loses value.
I use a nail clipper for cutting runners too ! Everyone said I was odd for using it but it works really well and gets really flush cuts, use what works I say
Never give up never surrender in the face of adversity, that is the way to go. Keep up the master work quality
My jaw literally dropped, no lie, NEVER STOP BUILDING!! An inspiration you are, I’ve been doing this for 2 months and you’ve pushed me to get better
I've been building since the original 80's kits (pre first grade) and I'm still learning and being inspired to improve watching builders like him ( his builds make mine look like they were done by an amateur ) keep building and improving you'll get there one day just remain dedicated to the craft and who knows what may happen in the future ( gbwc entrant one day )
A word of advice with that paper cutter, i used to work with one on a daily basis, be careful with large pieces, those blades tend to cut at an angle the longer you go, and if you dont do it already it would be wise to tape the sheet in place. The weight of the blade handle has a tendency to slighly move whatever you're cutting as you're cutting it. Granted, you're probably the best builder on youtube, so im sure you'll be okay.
Last part gave me goosebumps for real. RESPECT THE GRIND AND HEART FOR YOUR WORK MAN.
That ad break was like watching anime on tv and then a commercial pops out and your just waiting for it to end because the best part is coming up 😂
The Carbon fiber look on the paint is insane!!!! amazing!
The craftsmanship, unrivaled.
I feel your pain so much when you had to sand and repaint most of your parts, I don’t have an air brush yet so this has literally been my life for weeks now with rattle cans, I’ve been waiting till Christmas cause you never know but I feel your pain man, keep up the amazing work!
BRAVO!!!! Amazing work! And I can’t wait what crazy idea you’ll come up for that PG!!
Another wholesome video. All the process and editing were superb.
Me, seeing the nail clippers: ah yes, I see you're a man of culture as well
Every single video from him is a cinematic stroke of genius.
Your editing, your choice of music to evoke emotion at the right time. We'll done sir. BRAVO
Me: What pair of snippers is he using today?
You: nail cutters
Me: .....
Glad im not the only one thinking...wth???
I just instantly thought of the parable about the great swordsman... that whether you give him a toothpick or a sword he will still know how to slay. And StudioG surely slayed this custom
Yea, im not a gunpla modeler.......but just why man???????
@@kerythan they used to cut the piece from the spruce using clippers in Japan back in the day... I think he wanted to show that any clippers will do, and that anything is possible.
Noob like me: this plato nipper sucks!!!
StudioG - used nail cutter and damn old nipper
Me:🤯🤯🤯🤯🤯
I love watching his videos because he gasses me up the whole time he is making art work. Like the Gunpla Bob Ross
Another great piece of work the mg banshee is not good I just turned it into a MGEX that’s hard and this guy deserves respect
The last part start 23:56 you guys gonna see the most beautiful part ever. Thats what I called worth my 25:32 watching this video. Love it justin keep it up !!
Happy to see Studio G come back with another custom, even after a long wait it's always worth it. 😎
Even finished my own HG IBO kitbash during the wait.
Dude, i don't want u to die. Please God. Give this man 200yrs of life for him to build more of this. So that my kid's gon watch this.
Wow! Just WOW! I LOVE THIS BANSHEE! I LOVE YOUR WORKS! AND I LOVE YOU BRO! Congratulations! This is another milestone for you, and we all know you deserve it :) We'll wait for more of your work, learnings and success! StudioG for the win!
You my friend, you should be the next meijin this is a work of genius and art
This is one of the most impressive things I've ever seen! The video quality and editing itself was masterfully done. Bravo!
i never seen anything more epic in my entire life. when i thought the video was about to end, it kept on going lol
Speechless. My jaw dropped when you unveiled the final battle and then seeing the little "Coming Next." Surprise was crazy! Super excited for what's coming up next. Amazing, always giving us the very absolute best in your videos.
That's what I'm talking about. Dude.. I love the result. The color mixing is awesome. Like it more than before. You're awesome
Mind-blowing build here! Keep building man!
Dude you're great at editing and you're monster at Gunpla. Keep smashing it!
You have become a master creating true works of gundam art. Thank you
This is not banshee anymore, this is beast monster!!!!!!!!!!😍😍😍😍😍😍
Yo the Hype on this was insane, great job and looking forward to you turning that Perfect Grade into Gundamrium Grade.
That nail clipper is the epic builder moment 🤣👍🏻 rarely to seen
I just recently bought my first gundam and I started looking through everyone's painting in RUclips. Then I realized, I'm not really patient. So, I'm not sure if I can make mine with all these hours and details like yours. Lol!! Anyway, your painting is awesome.
got goose bumps when the final diorama is revealed! So awesome!
Your determination and patience is incredible
My favorite Gundam! I'm currently finishing up my own customizations on the High grade line before moving onto the MG and PG. Thanks for the review!!!
It's shocking to see the very first PG in @Studio G RUclips Channel. I can't wait!!!!
Ya knocked it out of the park again G, also congrats on having your build displayed on rise of Gunpla(or Gundam? I don't remember), glad to see you grow bigger and bigger each day.
I just, have no words to describe this, it's magnificent
Thank you so much for the links in the description! I have been looking for that scribing tape forever
Dude you are God at this ... never stop producing this masterpieces
That build is well beyond the title of MGEX! This is by far your best build yet I’m glad you made it through the struggles that are the MG Banshee and completed this amazing build!
Who would dislike this? Great vid man. Keep up the good work.
Gunpla can bring out all types of emotion. That's the beauty of it.
The amount of dopamine that hit my brain when I saw the final product. I felt like I was gonna pass out.
One month in the making, this is epic! I hope you're happy with it in the end even after all the headaches it brought because it truly does look epic
Dude must have gone through an entire anime season with all the Sanding he was put through
I am speechless. 😶 🤩 w0w, Epic. U didn't gave up that's the spirit of Gunpla and Gunpla is freedom.
After watching more and more of your videos I’ve realized you and I have a very similar sense of style when it comes to color schemes. I thoroughly enjoy every video you make!
Gunplas in our hands: Toys
Gunplas in his hands: **GUNDAM**
of course we are still young
@@justsomerandomfishwithmap4185 But when you grow up you won't have the time to put into things like this unless you make it your career
@@eleventhus i am still 14 year old
@@justsomerandomfishwithmap4185 Uhm.... How does that affect what I said?
@@eleventhus yo mama
It looks so evil and powerful! I LOVE IT!!
As glorious as your craftmanship is, everytime you drop the part for the explosion it makes me feel very uneasy :P
Idk how I stumbled across your Chanel. Huge fan man. Makes me want to invest my time into gunpla.
Man! Your work is insane! Stay strong and healthy as you build and video-producing! Can't wait to see what you will do with the PG RX-78-2!!
You deserve all the respect man. Just built that kit and it was horrible. To see you do that. I shouldn't complain😂😂
Yo this was insane!!,you are really dedicated!!,if im the one who try to built this im problably gonna cry in the first day of building it lol.You earned a sub!
14:56: I cried, too, brother. I've been there. It's totally disheartening.
Wow! Just wow!!! Hands down another amazing build
Excellent work as always Justin!
OMFG, Just saw the end product. Your very talented, this Def deserves to be on display.
Started watching your videos 2 days ago. Now I’m down the rabbit hole 50 bucks. Can’t wait till the rest of my tools come in. Just picked up ageis knight , getting everything off the spru for a test fit.
Yo how is the build?
How do you cut out the entire runner and know what's what? I feel like I'd mix everything up! (I've only built a couple of kits so far so maybe it's just lack of experience)
I love being able to see more of the process. This was so much fun to watch!
You improved a lot sir G! I am proud that I am one of the early subs who witnessed your hardworks. Godspeed to u!
My favorite of the Gundams. That crown of a v-fin and the gold of a king.
What you do with these kits...unbelievable. The level of awesome is off the charts. Keep it up bro!
You are amazing! Your have become everything you have set out to be and you keep going. The builds get better and better each time. Your an inspiration.
I have most of the Gundams that studio has most of them not all
What i would give to Build and custom paint, this is all REALLY awesome. This reminds me how much i love Gunpla even if i havent touched it in years!!!
You really are a true artist.
greetings from Indonesia
Once upon a time. . .there was a man who call himself StudioG,he's a professional gunpla builder, he loves hia job so much he can spent days creating his own version of gunpla models. One day Bandai released MGEX Unicorn model kit,he was vsry excited because of it. However he noticed that Bandai only release Unicorn version of MGEX so he decided to build his own MGEX Banshee version, he kept on painting,modding and decaling for 27 days straight and uploaded his finishing product to youtube so everyone can see his work. In just a few days, StudioG already got more than millions of viewers and over thousands of comments. Later on that day Bandai sent a CEO out to fly all the way to StudioG's house and fined him 200 million dollars for copyright issues.
I can't believe the work, dedication and skill you put into customizing the gunplas and these videos. You're a beast. Well done.
Bro really went the extra mile and literally turn his MG to an MGEX, great display of skill, knowledge, equipment and most of all patience.
Am new to all this but do you need the softer and setter to apply the decals or can you do without? Also did you use glass paint for painting?
Despite the frustration and mishaps in this build, you turned it into a masterpiece. I might be a little biased bc the banshee is one of my favorite mobile suits but this is my favorite custom build of yours to date. Well done sir!
Congrats on the squarespace sponsorship!
its like asmr at 4:30
These videos are so satisfying for me to watch
i really love your art broo❤