What a beautiful way you made your shelf and I thank you because I'm going to do this in my shed with wooden pallets... Thank you for this beautiful video
When I worked on a construction site, someone referred to them as "glass pallets". And said they're especially strong and rigid for transporting panes of glass.
What do you call the brackets(?) you used to hold up the shelves? I don't think we have them in my neck of the woods. Do you have a link to somewhere I can buy them online?
Excellent video! Can you share *what type of screws you are using?* For the most part, I've been using 2 or 3 inch deck screws. I'd like to get these screws you have but I don't know what they are. Thanks
idk i'm a perfectionist and have ocd for details, there's a few unpolished techniques i'd have to figure out how to modify personally if i went with your design like the joining of the 3 pieces and the metal L brackets. other than that good job.
Unless your cutting is dead on it will be wobbly and it has no cross brace system to rectify this. You are limited by the size of the wood and there is no stacking joins to overcome this. Actually you can buy carcassing wood very cheaply in 7 foot lengths plus so you can have floor to ceiling shelves. Try not to use a jig saw use a mitre saw. Or a mitre box and panel saw. If you used triangular metal brackets at the back you will partially brace it. Think whether you need to attach to a wall - kids - elderly etc.
Yeah, a lot of stolen plans from a spinoff of "Ted's Woodworking" BS with a fake guy for the brand. Go to the site and watch your adblocker go berserk with "unsafe" links. Plus the 25 minute advertorial there that repeats the same five sentences over and over, while demonstrating obvious variations in the plan styles - because they're stolen - is just breathtaking in its incompetence. Don't give them your money.
I thought I'd seen the most dangerous table saw before, but this truly takes the cake. Holy smokes. This is truly breathtaking.
Ahah😂You are not the first who write about it 😄
Wont be the last cause here I am comin in to say something about it. Gawdawmn ! All ten fingers still??@@diywithandrew784
Same, I think the saw will randomly appear in my nightmares from now on
2:15 That’s actually pretty smart. That’s such a great tip
What a beautiful way you made your shelf and I thank you because I'm going to do this in my shed with wooden pallets... Thank you for this beautiful video
Thank you so much!
Killer table saw😁 'n' great guitar 🎸🎸🎸
Nice video, no B.S. and right to the point! Thanks!
love this. i collect a lot of free pallet wood. will give this a try. it looks so beautiful sanded down
Thanks for comment!
That’s awesome, I had something similar in my mind & that’s why I looked it up first. Thanks for great ideas.
Great video, love your spinning wheel of death!
that’s so awesome and great instructions!
Thank you!! 😃
Looks great, good job. Now ro find those brackets... they're beauts...
Well I am so gonna replicate this.... but a shelf for the garage. Just finishing building patio furniture. Lol
Good luck for you!
Terrific ideas. Thanks 👏🌈🇺🇦🌻🇭🇲👏👏
Man where did you find a pallet that heavy duty? I have access to unlimited pallets, but I've never seen one with such thick cuts.
Maybe they are not used in your country. I got a bunch of them
When I worked on a construction site, someone referred to them as "glass pallets". And said they're especially strong and rigid for transporting panes of glass.
Love your channel man! Great work
Thank you! 😊
Greate Shelf! Good job
Thank you! 👍👍
Nice job.
muy facil y barato hay que hacer
I don't have a skillsaw handy, do you think a handsaw would work alright?
Great
Thanks for guidenc
Thanks mate.
Nice idea, thanks!
Thanks for comment!
Very good! 👍
Thank you!
I would like to try this… excuse my ignorance, but what are those little metals where the screws go to hold up the shelves to the studs?
Thanks you sir for nice vedeo
Thank you!
Beautiful 😍 😘
Thank you! 😁
What do you call the brackets(?) you used to hold up the shelves? I don't think we have them in my neck of the woods.
Do you have a link to somewhere I can buy them online?
Excellent video! Can you share *what type of screws you are using?* For the most part, I've been using 2 or 3 inch deck screws. I'd like to get these screws you have but I don't know what they are. Thanks
Muito bom
idk i'm a perfectionist and have ocd for details, there's a few unpolished techniques i'd have to figure out how to modify personally if i went with your design like the joining of the 3 pieces and the metal L brackets. other than that good job.
I can't get past step one. I've gently tossed my crowbar towards my pallet but nothing happened...
😂😂😂😂😂😂
well done
Thank you! 👍
Could I do this with an old bookshelf made from like that wood composite?
Olx mkveis usados prateleiras
Where can i find those cute little brackets you used? I dont have a saw like that but I wanna try this so bad
Man you just gave me idea
This was a good inspiration for me but that table saw made my fingers hurt. Lol. Be careful.
Unless your cutting is dead on it will be wobbly and it has no cross brace system to rectify this. You are limited by the size of the wood and there is no stacking joins to overcome this. Actually you can buy carcassing wood very cheaply in 7 foot lengths plus so you can have floor to ceiling shelves. Try not to use a jig saw use a mitre saw. Or a mitre box and panel saw. If you used triangular metal brackets at the back you will partially brace it. Think whether you need to attach to a wall - kids - elderly etc.
❤❤❤❤❤
❤
Now make one where you make it into a $1000 desk
👍🏽👍🏽👍🏽
Where's your safety guard on the circular saw!!!!! OMG
i didn't get the measurments i'm gonna watch again
👌👌👌👌🌹🌹🌹🌹
Чувак, де палети береш? )
З будівництва залишились
My DIY Levitating Book Shelf Video: ruclips.net/video/q3orNRGwZbc/видео.html
Now all I have to buy is a big fucking table saw.
Couldn’t watch the video because of the Music
Womp Womp
Show
Woodglut has a lot of plans to choose from.
Thank you!
Yeah, a lot of stolen plans from a spinoff of "Ted's Woodworking" BS with a fake guy for the brand. Go to the site and watch your adblocker go berserk with "unsafe" links. Plus the 25 minute advertorial there that repeats the same five sentences over and over, while demonstrating obvious variations in the plan styles - because they're stolen - is just breathtaking in its incompetence. Don't give them your money.
P
Couldn’t watch …..the music so annoying
Mute it.
Just old worn out bug infested two by fours
Wobbly aeak base ''''. That thing is for what ? Could not put it in the garage useless junk
Hope you don't think you could 😊ever sell that.
Now all I have to buy is a big fucking table saw.