5 Speed to 6 Speed Transmission Swap + LSD Swap | 2006 NC Miata
HTML-код
- Опубликовано: 22 авг 2024
- In this video Brandon swaps out the 5 speed transmission in his NC Miata for a 6 speed along with replacing his differential with a limited slip differential. He goes through the parts needed to do this swap while showing you the steps he takes to do this job in an 8 hour timeframe.
Parts List
Six speed transmission
six speed driveshaft
LSD
Transmission fluid
Dif fluid
Clutch - Exedy 10810
Flywheel - 167918
Transmission output shaft seal - 710818
Timken Rear Main Seal - 710600
Input shaft seal - Mazda P501-16-103
Axle seals - Mazda P043-27-238A
Shift boot kit - Moss 910-388
Reverse lockout - 903-478
NC 6 speed Shifter Bushing - 908-221
Short shifter
DI heat shield - 10950
Support our channel: T-shirts and hats available at www.uwrenchaz.com/merchandise
Music - Epidemicsound.com
Gravel and Stone/Northside
I'm Not Crying (Instrumental Version)/Of Men And Wolves
Streetlight Jam/The New Fools
All That Talks/A Month of Sleep
Homeward bound, I'm glad to be homeward bound. Outstanding Brandon!
I did not know that the Miata had that much bracing in the chassis......looks substantial.
It’s a very strong chassis.
You make it look so easy. 👍🏻
Very happy mine was already the 6 speed with the Torsen. 😉
Enjoyed that video. I love hard work, I can watch it all day...
In a day AND making a video for the duration. Awesome.
R501-17-335A is the 6 speed output seal. I had the exact same issue and ordered about 4 of them from different Mazda dealers saying it was the right one Atkins rotary came through, looked it up and nailed it.
Cool to see the process. Definitely motivating to get it done is have it be your ride home! 😂
Best MX5 tutorial in history! Very helpful for me. thank you!
show them Pro moves Brandon !
Keep up with all the great videos!
We spin together, like rama, lama, lama
Kadingy, kading-a-dong
I see you on your way to work as I'm heading the opposite direction doing the same. Car looks rad!!
Thank you!
Excellent video!! I will be using this video, when I get to finalize my build. I'm building from scratch a Locost, with the same exact drivetrain as yours(I will have throttle bodies though). Hopefully the whole car will be less then 1500lbs.
If that's the Ford Motorcraft XT-M5-QS trans fluid, I find that it doesn't last very long before it...wears out... I guess? I've swapped over to TriboDyn TRI-EX 2 and that seems to be holding up better. Quick note: I also have a transaxle with a Quaife LSD so that might be important to note.
Being a FWD trans there’s a lot more going on, but I recommend doing the fluid every 30k which should be fine for the Ford MTF.
Didn't seem to last more than maybe 5-10k for me.
8ft lbs= 1 uggas 0 duggas
32 ft lbs = 2 uggas 1 dugga
😂😂
Just to make sure I don’t need the differential to do this correct
Don't LSDs require a friction modifier in the lube?
This one only calls for the GL5 because it’s not a clutch type. You’re thinking of clutch type.