We Made It to 10k Subs! Join In On the Giveaway 👀
HTML-код
- Опубликовано: 2 окт 2024
- Thank you all once again for helping me reach yet another HUGE milestone in my RUclips journey! A special shout out to all of the members of The Hangar for helping to shape and create such an awesome community centered around Gunpla and helping other Gunpla builders!
**GIVEAWAY IS NOW CLOSED**
RULES FOR THE GIVEAWAY!
1. This giveaway is not sponsored or endorsed by any company, especially RUclips. All of the prizes were purchased with my own money.
2. Once the prize has been shipped, I am not responsible for any damage that may have been caused during shipment
3. To enter, comment below what your Gunpla Goals are for 2023, and whether or not you think you'll achieve them this year
4. Entries will be open until the winner is announced via livestream between February 3-5, 2023
-Additional entries are provided automatically for members of level 5+, as specified in the giveaway video. The current members eligible for extra entries have already been captured and catalogued into a list; joining and getting to level 5 before the giveaway ends will not grant additional entries!
5. SUBSCRIBE to keep up with future videos and when I go live on stream!
6. The prize is as follows:
-1x ZeroGravity Judge Battle Machine Moonnight Version
7. Winners will need to contact me via email at amillagunpla@gmail.com or directly through Discord (aMilla#1058)
Thank you for all the support, and good luck!
The prize was purchased from ShowZStore/GunDamit. It's currently on pre-order for a reprint!
gundamit.com/z...
Check out HobbyLinkJapan! They are one of the most popular vendors in Japan and offer great prices, even if you factor in the cost of shipping to the US! Check them out with my link here:
shop.hlj.com/a...
Wanna become a Patreon, join The Hangar (Discord), or follow me on Instagram?
linktr.ee/amilla
****************************************************************************
Current toolbox:
Makeup Organizer: amzn.to/3yPU1CX
USAGS Single Bladed Nippers: www.usagundams...
GodHand Single Bladed Nippers: newtype.us/p/5...
USAGS Hobby Knife: www.usagundams...
Gunprimer Tools: majinhobby.com...
DSPIAE ST-A 3.0: amzn.to/3hv0363
Generic Glass File: amzn.to/36j797g
GSI Creos Scriber: amzn.to/3yBWkJz
Tamiya Panel Liner: amzn.to/36nOUxm
Tachikawa Pen & Nib Holder (calligraphy pen): amzn.to/3xxQDMM
Pointed Cotton Swabs: amzn.to/3iNJDVr
Scribing Tape: amzn.to/2SUzX2G
Iwata Eclipse HP-CS Airbrush: amzn.to/3hpngq8
Paasche D3000R: amzn.to/36kP9td
Part Separator: www.usagundams...
Congratulations. Always good content. My Gunpla goal is to get better at customization with paint and leds😅
my gunpla goal is to build 1 kit for every 3 i stockpile..
Congratz!!! My goal 2023 is to finish up my backlog gunpla. I think i can do it.
I believe in you, but I also believe that backlogs have a tendency to grow when we don't want them to. Haha, good luck and start building!
Congrats! 🥳 Can't wait for the next 10(12)k! My goal is to keep chugging through my backlog. And maybe messing with paint. 🤔
Your hand painting is already there! Time to airbrush!
My gunpla goals? It's like new years resolutions it's never going to get done, but I can still make a dent.
My gunpla goals for 2023 are to
1. Build a bunch of kits to make a dent in the never ending backlog
2. Find a space for an IKEA-grade shelf
3. Build shelf to store gunpla
????
4. Repeat process for 2024
The whole point is to speak it into existence! I believe in you 👊
Oh my God, what a giveaway!!!!!!!
Also: Gunpla Goals for this year are to finish as many kits as I can and to not buy any more kits until I do. Backlog is too big rn! Pretty loose goals, so I think I can do it. I get one mulligan if the MG Spallow drops though!
No such thing as "backlog is too big"! Jk, I believe in you! And looking forward to some nice fluorescent paint jobs!
Hey congrats it's a great channel
Thank you so much 🙂
Awesome!! Congrats, you deserve it!
My goals are to take apart and clean and panel line all of my early builds because I was too skittish with sanding and clipping in the beginning. They all look like a mess! I already did it with a God Gundam and I'm still riding that high...
Panel lining is a great way to appreciate a kit you've already built in the past. Give it the details it deserves!
Well my goals for 2023 is to build my very first Gundam kit, freedom Gundam. Then to keep building!
To build my first kit this Friday 😎 my gunpla wish list is growing
Congrats on the milestone!
My gunpla goal for 2023 is to finally “finish” my gunpla room.
My goal for 2023 is to begin spray painting my kits, I first need to build them, but I’d like to finish my HG Kshatriya first
My goal is to build my first RG gunpla! I have a Crossbone ready to go. Just have to pull the trigger!
My goal is to save up enough to buy a Gundam 00 Perfect grade and build it
Congratulations mate. I have a very simple gunpla goal, which is to make no mistake for one build 🤣🤣
Gunpla goals 4 the year are learning to scribe and quite possibly airbrushing too! I feel like i wanna take the next step into customizing some smaller models b4 i try tackling the one i wanna do.
Nothing wrong with starting small! I'm still learning scribing by tracing over existing panel lines
Props for the 12k! 🎉🎉🎉
Still gotta admit, that giveaway Judge looks spectacular...
My gunpla goals for this year? Probably get a glass display for them, I had a shelf and a drawer in which I displayed them, but now I'm running out of space 😅
Congrats! My goal is to work on my panel lining for sure!
Congrats and glad to see you're back making videos!
My 2023 goals are to finish the MG EW Wing series and get them topcoated. Should be doable, so I'll say "yes"
Congrats on the subs. My goal for 2023 is to be able to fully airbrush paint a kit
grats on 12k+!, My Gunpla goal is to start on painting my kits both hand and airbrush
Thank you for your video sir about tutorials and the do and dont's for gunpla im a newbie it helps me a lot
Congratulations man!
My gunpla goal this year is to finish my build of the RG Sazabi and try my hand at pla-plating, I really like how imposing that kit is for the 144 scale!
Congrats on the milestone!!!
My gunpla goal is to hopefully make more models as I've only started recently. It's definitely a dent on my high school pockets but hopefully I can achieve this goal!
Hey congrats on the milestone. Best gunpla youtuber no 🧢! My gunpla goal for 2023 is to perfect a full custom build and enter it in a contest
Congrats dude on your 10k subs, your videos are helping me a lot. I just started getting into Gunpla and I just finished building my very first kit(RX 78-2 Beyond Global) recently and I just finished applying some panel lining. My goal for this year is to enhance my skills in building Gunpla especially on removing nub/stress mark and also to enhance my panel lining and also learn to apply some waterslide decals and apply topcoat. Keep up the good work my dude! Thanks as always!
My goal this year is to paint my first kit. I'm aiming for a red candy coat for my MG Epyon. Your tutorials and comparisons are the best!
In 2023, I want to build any mono-eyed models and of luck comes my way land me a job after graduation this August, I'd reward myself a Sazabi (my dream unit since I knew what gunpla is) if not I'd get myself a cheaper mono-eyed unit (even bootleg ones [I know it's mostly frowned upon, but beggars can't be choosers] just to satisfy the cravings to build a zeon unit). 😁
Nothing wrong with bootleg/3rd party kits! I personally don't choose to build them, but I hear their quality is getting better at least!
@@aMillaGunpla bootlegs tend to break parts easily, joints magically get loose even when you're not constantly moving them, but nonetheless they're good for display.
Good job dude, keep up the good work, found your videos really helpful.
I've only just gotten into Gunpla but My goal is to build more kits (maybe even a master grade) and get better at it and maybe step into customisation. Really hope I can reach it this year
My goal is to learn how to use lacquer paints so I can make more of my gunpla pink!! I will achieve it as soon as i get a respirator to use the paints safely!
Congrats! My goal is to try panel lining a kit (and getting all the Demi trainer variants)
Your content has been unbelievably helpful in figuring out what tools to get as a beginner
My ultimate goal this year is to learn to paint properly without it being weird and lumpy or too bubbly and perhaps try to make some space and get the things needed to learn air brushing
Hope I am not too late to join in this as I was always too late on all my gunpla builds. My goal is to build more than ever this year!
Congrats on reaching 12k subscribers!! My gunpla goal for 2023 is to finally learn and start panel lining my gunpla kits because I've been only straight building them so I can bring out the details of my kits. Keep up the good work aMilla!! 😄
Thank you! Panel lining is just the first step... eventually you'll start painting, scribing, and even making custom parts!
Way to go! My Gunpla goal is to honestly just organize my work space! I've finally had time to build but my office is a mess!
This is me since I moved in
Congratulations on the 10k subs. My gunpla goal is to actually build more gunpla
I think we all have the same goal here!
A judge!?!? Damn!! My goal for 2023 is to get my back log done and fully painted. Including the Psycho Zaku!
No such thing as a finished backlog! But I believe in you, let's see that 2-month long stream series for the PZVK!
Congrats!!!!! My goal in gunpla for 2023 is to get better at posing, taking pictures, and just making my kits pop with attention to the smaller details
subbed!
My gunpla goal is to learn how to scribe my kits and buy my first airbrush!
Smart idea to recycle the old sponges!
Congratulations!!!!!! Your vídeos have been very, very helpful to me when I build my kits.
My main gunpla goal is to build my Master Grades Gundam Exia and 00 Raiser. It'll be my first time building MG kits, but I hope I can finish it properly and cleanly. Already pre-ordered those kits and just waiting for them to arrive.
Thanks! If you can build a HG with no issues, you can build a MG with no issues. It's almost the same thing, just with extra parts!
Great mentoring channel! My goals this 2023 for my Gunpla is to keep perfecting my panel lining, buy good tools for getting rid of nub marks, get a God Hand, and hopefully hunt down a Lfrith. Oh, and finish building 3 MG that I got back in 2021, geez Louise...
All very reachable goals! Lfrith should be more and more available as the year goes by. And don't feel bad, I still have kits I've bought back in like 2018 that I haven't touched lol
Congratulations! I am new to the hobby and aim to grow my skill set and make more Gunpla.
Thanks, and welcome to the Gunpla community! 😃
More PGs and masterpiece kits lol way to go Bro on the subs
Heck yeah, let's see 'em!
Congrats!! My goal for 2323 is to make 2-3 gunplas, my backlog is only 1, so will have to buy 2 mores, and I need my first Zaku lol.
I don't think I'll be around during 2323, but that sounds like plenty of time to buy more kits 😂
Congratulations! My Gunpla goal this year is to finally build my first Perfect Grade. I've always just been too scared to try because I was scared I would mess it up.
If you can build a HG kit without mistakes, you can build a PG kit, only difference is that mistakes cost more on a PG lol
Get back to building consistently. It’s been so hard to sit down and build with the family. But I’m excited to get some kits made.
I'm the same way, but with just a dog and a gf lol. I need to stop doing other pointless tasks and put more focus on building!
Congrats on 10k!!! (now 12.4k)
My main gunpla goals this year are to finish at least 3 projects I've had in mind and to learn scribing. I think I might accomplish them, but it depends on whether I have the time for them.
You will finish them. And you will post them. And you will receive the deserved praise!
Amazing work passing the 10k mark! Hope your channels keep growing strong 👍🏻
As for gunpla goals for this year, I definitely want to get some Witch from Mercury Hg's (mainly the Lfrith, Aerial and the Michaelis), I tried to get them at a store near me but they sold out on less then a day.
Thanks! They're hard to come by, but it's been looking like the reprints are still coming, eventually the demand for them will fall closer to the supply levels, so should be easier to get at your usual Gunpla supply
My goal is to get an awesome building station uo and begin airbrushing, YES haven't built anything since my jesta, so I have had withdrawals
You can do it! Just build your set up one piece at a time, no need to get everything at once
That’s awesome!! I actually just subscribed a week ago. My gunpla goals for this year are to work on filling in my panel lines on previously built Gundams, I would like to get the MG Wing Zero Ew ver ka, and my wife has asked me to get her the MG unicorn ver ka because she likes the lights on it. Love your content and keep it up.
Thank you! It's always more fun when your partner wants to get involved in your hobbies
I'm still very new to the hobby, but I think I'd like my first level up to be painting a few accents on my kits, either with spraycans or hand painting.
Nothing wrong with starting with hand painting, you don't even have to paint the whole kit!
Congrats on the milestone! My gunpla goals for the year are to build more than I buy and to finally build my first MG
Guilty of the first part 😅
Congratulations on 12k. I want to try and get my first perfect grade kit. As well as try doing a bit more customization. Ive done a couple custom kits with sharpie and some with spray paint. I want to try air brushing and hyrdrodipping a few. Ps i know im fairly new to the channel but i plan on staying lol
Plenty of room for customization, and hydrodipping is definitely one of the less common options. Would love to see how it turns out!
Congrats dog!! Honestly my only goal right now is too get more space for my kits lmao, but I also want to get better in general, learn how to scribe, how to airbrush and everything!
Space does become an issue after a while lol, I resorted to putting all my boxes on shelves in the living room
As a beginner my goal for this year is to improve the qualities of my tools! Started with a cheap beginner kit I bought online🤓 hoping to end the year with more quality tools so that it would make the building process smoother 😊
I love getting new tools! I probably spend more time trying out tools than I do actually building things...
I’m sure I will reach my goals but my goal is to finish painting all of the kits I have lined up. And possibly upgrade my airbrush set with a compressor and a better airbrush because I am using a portable one atm.
I've seen plenty of good paint jobs done with one of those portable airbrushes, an upgrade is nice, but don't let it slow you down!
Congrats! My goal is to start building again… between moving several times, and work/real life getting in the way, getting the hobby kickstarted again has been a challenge which I hope I can overcome soon.
I'm the same way. I keep making excuses, but I need to just sit down and build!
Congrats on the sub, my gunpla goal is to build the Aerial gundam, it's really hard to get one here in Italy 😭
It's still pretty hard to get one anywhere!
My gunpla goal is to just get more of my painting ideas out and get more kits painted
Yup, no more thinking, just doing!
Gunpla goal this year is to build a resin conversion kit, I finally feel confident enough to get it done.
That's a great goal, make sure to use the proper safety equipment when sanding resin!
hell yeah congrats! for 2023, id like to get more confident with my building, maybe learn how to use topcoat etc or even possibly get a godhand. i feel like if im able to get some more kits, i can work my way up to something like an rg as so far ive only build high grades and a single master grade. id also like to get better at cleaning up nub marks, whether thats just technique or getting something like sanding sticks and a raser.
With enough practice, you could get clean nubmarks done with just a hobby knife. Other tools like sanding sticks or glass files just make it a lot easier lol
Congrats on the subs! My goal is to properly panel line all of my previously built models. Hopefully I can get at least half of them done
Once you find your flow, you'll be able to breeze through panel lining a whole kit!
Well done on the massive achievement! My gunpla goal is to see if I can build a master grade this year
If you can build a HG will no problem, then you can definitely build a MG! It's the same thing, just more parts and a little bigger 🙂
Goals: Get ok at scribing
You got this!
Congrats man, can't wait to see how high this channel will climb. My gunpla goals are to spend money on only 1 kit per month whilst getting all the kits I want
Financial self control is a good goal to have, I need to apply that to all the things I spend money on lol, but 12 kits a year would still leave you with a good amount of nice picks!
Congrats! My goal is to do my first resin kit and also set up a display shelf for all the kits. I think I should be able to achieve these by the end of the year :)
Sounds doable! I'll probably be getting a few more display cases myself if IKEA doesn't keep raising their prices...
HELL YEAH, CONGRATS ON 12K! My goal for 2023 is to finally kitbash a MG, so far all of my kitbashes have been HGs and my only MG custom was just a repaint. I think it's about time I step up my game and really try something greater!
Kitbashing MGs is a crazy feat, good luck, you got it!
All i wanna do this year is to get back to airbrushing and doing at least 3 big custom pieces. Oh yeah, and get the courage to paint the PGU. That dude is just staring at me from across my desk, making me feel shame i'm not getting to it.
The PGU can be intimidating. I'm way too inexperienced with paint to start on that big boy just yet lol
amazing! Well done bro!
Thank you!
Woo, congrats!
My goal in Q1 2023 is to get through my backlog before April because I'll be going to Japan to get even more gunpla! 😱
Hope you bring an empty luggage!
@@aMillaGunpla That's the plan! Just carry-on until we get to Tokyo, then buying a new suitcase to carry stuff back with
Congratulations! My Gunpla goal is get to all my backlog!
We don't believe in finishing backlogs here 😂
@@aMillaGunpla so true 🤣
Love your work! Might build my first MG this year
You can do it! Just make sure you have the room, eventually you'll be building your 10th MG!
The enigma of the ever self replicating gunpla!
10k!! Nice man! The main goal for this year is to customize an MG from head to toe. I'd like to paint, scribe, panel line, and maybe even modify with pla plates. I'm getting to the point where I'm building efficiently, which was one of my goals last year 😎. Anyways, congratulations, and here's to 10k more 🍻
Nice! Goals on goals, you can crush 'em this year too!
@HiNewDaniel you've got something waiting to be claimed! You've got until 10PM EST on 2/6 to claim your prize, or I'll have to re-draw another winner!
Email me at amillagunpla@gmail.com, message me on Instagram (@ayemilla), or DM me on Discord!
My goal is to find a place to put all my Gunpla when I move back home. I’ve been separated from the fam for over a year, and building has helped pass the time outside of work/school. Congratulations on 12k, looking forward to more amazing videos this year!
Good luck with the move!
@@aMillaGunpla Thank you!
Awesome! I've gotten some great tool recommendations from your content so hats off to you. My gunpla goal is actually two. One is to start exploring scribing as part of my detailing work now that I have two painted kits under my belt. Two is to build through my stack of Gundam Wing MGs. I've basically got every suit from the series in Master Grade and I really want to get them built beautifully and arranged in a display!
Nice! I'm still trying to track down two more kits from the Glory of the Losers line up, and I'll be doing the same thing!
@@aMillaGunpla Heck yeah! The Glory of the Losers versions of all of them are so great. Basically a whole slew of Ver. Ka designs.
Congratulations on the 12k. My goal is to make a diorama for my kits and get a light box to take pictures of my kits.
You can also make your own light box for a good amount cheaper! There's some nifty videos out there that can help you out
@@aMillaGunpla thanks for the suggestion, I'll look for the video.
My gunpla goal is to finish building my first master grade kit and work on making my nub removal cleaner and not damage the pieces.
I like to think that each kit is practice for the next kit. Don't let nubmark removal put you down, as long as you keep aiming to do better than the last 🙂
@@aMillaGunpla definitely doesn’t bring me down, I simply don’t like it when the parts end up being damaged and the kit looks very poorly assembled
Congrats on the 10k. One of my goals is to be able to get more mg kits since now all I have is one rx-78-2 so yeah definetly looking forward to a likee maybeee a sazabi!
Sazabi is a good one, definitely one of the top choices out there!
@@aMillaGunpla Yes it is! I have the 1/144 banshee norn destroy mode coming in today! Also your beginner tutorials helped so much when i was a beginner😭
Congrats on the subs, well deserved! I want to set up a spray booth and start airbrushing some custom paint schemes this year, should be able to do it once I redo the floor in my spare room.
You and me both! I have a bad habit of making room, then quickly getting disorganized again lol
Woohoo Congrats on the milestone! My main goal that I want to get to this year is finally busting out the airbrush from its packaging and get a custom painter build done! Waiting for the weather to get better (the excuse I’m telling myself) but hopefully will get to it by the summer!
If you have the space indoors, no need to wait for the weather! Well, I guess if you need your window open, you don't want it to be too cold...
Ugh lol i discovered you too late 😂
Or... you found the channel early for the next giveaway 😅
@@aMillaGunpla 20k will be here before we know it! 😁
Congrats on 10K dude!!! My gunpla goal for 2023 is to venture more into brush painting, and get to a point where I'm happy with the results. Sub-goal is getting you to build SOMETHING more often 😈
I believe you can get through at least one of those goals! 😅
My Gunpla goal is to finish my backlog, I keep getting kits then spending all my time watching gundam and looking at videos of kits rather than building them.