2012 Ford F550 "RhinoCHARGE" Walkaround and Test Drive! BULLETPROOF
HTML-код
- Опубликовано: 11 сен 2024
- This is a fully Armored Vehicle with OneWay Glass
Description:
Bullet Motorsports Inc. specializes in the sale of niche market / unique vehicles. What we have here is a 2012 Ford F550 that has been fitted with a fully armored body nicknamed the “RhinoCHARGE”! It is 1 of only 2 produced in the WORLD. Original MSRP was close to 400K. This is the perfect vehicle for advertising / Personal Protection / or a unique addition to a personal collection. It weighs 17,000 Pounds, and that weight consists of Armor plated steel and Oneway™ bulletproof glass. If you are looking for a perfect driving truck this is NOT for you, This truck was built for the sole purpose of Protection. This specific truck has been tested to 100mph during a showing with a government agency.
Interior:
The interior consists of the factory f550 Dash, other than that all the other components were hand built. It is protected by ¾ plate steel. Visibility is very good throughout the cabin. The A/C blows ice cold. The bullet proof glass is patented technology that protects the occupants from external gunfire, but allows for occupants to shoot through the glass during hairy situations. The seats are all aircraft grade, and are shock resistant. All of the seats have 5 pt harnesses with quick releases. The Radio works well, and has touch screen and a Bluetooth feature. The interior is very rugged and looks great. It serves one sole purpose, to keep you alive.
Exterior:
The Exterior is setup with sharp angles to reflect bullets. The Michelin Tires have 500 total miles on them, and they are mounted on Bead locks with the highly sought after Kevlar ring to protect from shrapnel and small rounds ( A spare front wheel and tire come with the purchase) The whole Cabin Is Armored even the underside. Please look through the gallery to see how great she looks. The front end is a one off design made of foam and rubber, and the fender flares are custom one off pieces made to fit the body. The exterior lighting is all Hella branded. The exterior coating is similar to a Line x coating for durability. There are minor scrapes and nicks from testing, but overall it is like New. She has only been stored indoors since birth. The Hood does not have latches, as it weighs 800lbs, A Forklift is needed to open it.
Drivetrain:
The RhinoCHARGE is essentially a F550 Chassis with the 6.7L Turbo Diesel Motor. It has been fitted with a Mini Maxx Programmer and DPF delete. This allows for up to 200 more hp at the push of a button. Stock configuration is 400hp and 800tq. It weighs 17K pounds and you can feel every LB of it as it goes down the road. There are no check engine lights, or hiccups. We did notice the steering is very heavy due to the added armor plating. We personally have taken this truck on the highway at 65mph with no issues. It is equipped with 4x4 and it operates, as it should. The rear suspension has been modified for the weight but the front-end suspension is still all Ford OE. This Particular RhinoCHARGE has 500 miles on it.
Key Facts:
• 1 of 2 produced
• original MSRP close to 400K
• Fully Armored
• One Way Bulletproof glass
• 4x4
• Titled as an 2012 F550 with original Vin Plate Included. (Original purchase order from dealer comes with truck)
• Aircraft grade seating with 5 way quick release harnesses
• Armor is equivalent to NIJ Level 3
• Florida Title
• Full Hella Light Conversion
• Michelin X Tires with Kevlar outer belt for added protection
• New Batteries
For Full Details on this vehicle please visit:
www.bulletmotorsports.com
As Always Please Subscribe!
Social Media Links Below:
Facebook: bulletmotorsports
IG: #bulletmotorsports
Drives better than my old lifted pickup full leaf suspension hurts. This is awesome
That thing is 3/8 steel not 3/4 just sayin.
I wants this , i wants this . Ooohhoo woww i love this.
whe he said "lets go to the beach" all i thought was GTA
Rayyan Ali it kinda looks like an insurgent
The way things are going around here we might actually need vehicles like that.
This is a must have for that hell of a place called Johannesburg...
I like it but with all the money spent to build it it has a Harbor Freight winch..
mark a , yeah you saw that too right
It was their demo truck.
ah ok, still a neat truck. an really those wenches have pretty good reviews , just surprising it didnt have a big name brand one on it.
wenches = Pirate Sluts.
mark a
Useless. And the fuel cap is wide open for making a burning coffin.
thats the placement of your rain wiffer very style unique
But will it blend
04:50 has a 12,000lb winch, which wont pull this truck.....ohhhh that's really useful.
00:58 If that's 3/4 inch, my husbands unit is 12".
I hope that's ar500 steel and not mild steel Because .308 will penatrate 3/4 inch mild steel.
Avery Voight Yes. .308 will penetrate 3/4 mild steel with ease.
Lvl 3... lvl 3 steel... do you really think the brand matters? Lvl 3. Also, that doesnt look like 3/4 to me..
Yeah that doesn't look 3/4 inch steal to me either. Even if it's ar500 half inch is what it looks like but armor-piercing 308 can still penetrate that
I thought the same thing....not even 1/2".
ar500 isnt a brand, its a rating.
Let's go to the beach.
i'd love to see what's left of someone who tries to brake check this monster. i need this thing in my life
I feel like .75 inches isn't that thick especially considering that's the whole door, there isn't insulation or other plastics on the inside which could at least help slow a bullet if one got through
probably because he is full of shit and that door is only 1/2" thick. also plastic does not slow down a bullet at all whatsoever, unless its 4" of solid poly.
hes probably mixing up 3/8 of an inch with 3/4 of an inch, cos it just looked around 3/8 (10mm) to me...
Imagine locking yourself out of it.
Nice
really Kool concept and would make a big difference in SHTF Scenario.
nice truck but that armor is a bit thin don't you think?
Does it come in blue? Will it fit in a McD"s drive thru?
First thing I'd do if I was able to buy one is hot box it.
Rofl. When you're getting attacked here, getting attacked there, all the attacks. Who are all these rich people that are constantly being fired upon who would need such a thing? lol
Exactly!!
They sell them to the military and government. I used go see a lot of them in Afghanistan.
You could use that winch to pull this vehicle by adding a pulley block and hooking the winch hook back to the bumper. Effectively allowing you to winch 24000 lbs
Great job on the video, Great looking vehicle.
Mpg?
single layer wont work well on explosive
Or just buy a marauder
can I order this with the Bentley interior?
HBY hi WhatsApp me 00971529415787
Would like to see demo of the one way glass - bullets go out but not in ? Shoot a dozen shots out, then sit inside and fired a few shots from outside.
awesome
Zombie apocalypse ready!
I'm a little confused 3/4 inch steel on doors? I don't see that with comparisons to his hand
Dan Muscarella it's 3/4 of an inch thick armored steel.
no its not. post up a tape measure next to it, because that is 1/2"
I have a transformers toy car a green jeep which is quite similar to this the difference being the open back
I'd love it if you'd do a video on the green gun truck my friend Kelvin makes models out of card board and he'd love to make one of this ford...
Sounds like demon!
droppin the kids off to school in this
That can stop 7.62x51 ?
Question:
So their is BAD WEATHER
and it’s hailing out side
Hail the size of
Softballs
Regular vehicles
Windshields getting smashed
Y’all never talk about
THAT,
Please talk bout that!!!!!!
Would I be SAFE
im guessing no air ride because one grenade would likely cripple the vehicle, would've been nice to have with that extra weight.
Perfect truck.. but the resting position of the wipers would mess me up 🤦🏾♂️🙆🏾♂️
I’ll volunteer my Mother in Law to test it’s bullet resistance LOL
“War is a racket!” - Gen. Smedley D. Butler, USMC (Ret) Not to mention extremely expensive!
Bro that’s 3/8 plate maybe 5/8. Not 3/4
Is that thickness enough to stop bullets ?
And I'm dead before I can get in the drivers seat..lol......yea id take one for the heck of it.
The greatest weakness of all amor vehicles gas consumption and energy use need eco mode and somewhat of a sports mode. So you don't have to get out and refill it every few minutes and I have a little quick boost to speed and Agility.
nice
Got a 2020 version And ship to Mexico?
so what kind of mpg is this armored truck getting??
What brand bedliner was painted to the vehicle ?
How much would this go for?
Bringing it to Iran?
Civilian 50 bmg will still go through this.
I want one
1:05 Wie die Türe oben "wabbelt" wenn er sie schließt (und irgendwie schließen die Türen oben am Rand gar nicht richtig ab). Und überhaupt sieht die Verarbeitungsqualität (siehe auch den Innenraum, oder Spaltmaße außen usw) sehr schlecht aus.
So a Hellcats' weight??
Cost of the vihical
forget the one way ballistic glass and just add gun ports for each seat.
how much like this car？
That was a lot of black smoke coming out of it. Be OK for the school run
Holy Shit
GBA 🇺🇸🦅⚓⚔️🛡️
Insulation?
This should be the president's car
Atleast on the doors 1in 1/2
Watch demolition ranch and tell me those side doors are not less than a inch thick
price price
it looks cheap and a Humvee armored knockoff
Does it float??
Franky Franke it sinks
Just saw this truck in a trump rally in northern CA badass
You can tell this wasn’t made by Lenco
Who bought it? An organisation? Was it a speculative build for supplying to organisations like police who need a vehicle like that?
Also when you’re test driving it not wearing your seatbelt properly you have your priorities all wrong.
the zombie apocalypse
weak, and poorly designed fore real work
Who here in 2020?
Nah that's the insurgent from gta 5
Is that legal for civillian use?
Maybe?
Needs some gun ports.
Kmart cowboy ,
More of a Target type of guy.
i’d love to have this thing for the second American civil war, lol.
I wait for it to run out of gas.... wait for my target to get hungry. I see many weakness ...
that doors are not really that thick
can I get one in black and how much
the black ones go for $350,000. gotta add $50,000 for the paint
Only one homeless person was harmed in the making of this video,
then they need to redo this video and increase that number!!
👍👍🇮🇩🇮🇩
Make it out of 1 inch titanium then we will talk
Very nice truck I’m sure a lot of time was spent making this but what idiot put that rear step on that thing will become your coffin once you get hung up on a log or rock cause of it it’s all about that departure angle life off-road bro tell them to jump in haha
The door is too thin. Not good.
Mehedi Hasan you’re an idiot.
Those doors look thin af
con Ba 3/4 armored steel is thin?
+BulletmotorsportsInc the door flexed as you shut it, obviously it will stop most rounds but looks easily comprisable when parked etc your safety then is determined only by the strength of the door lock which has only one catch holding it shut, also as a purchaser regardless off the thickness of the steel and it's effectiveness, psychologically you want a fat ass door protecting you from the outside, just like in normal cars the doors are thicker now to make you feel safer if that superficial thickness was gone leaving just the thin bare steel you would feel unsafe driving it, I would add some lightweight internal structure to the doors as a manufacturer and add some redundancy to its level off protection.
Those doors are not 3/4-19mm thick. Someone told you a bunch of lies or you misread something.
They are more like 6-8mm thick.
that definitely isnt 3/4 inch, maybe 3/8. guy doesn't look like he did well in math class
asi que estos camiones son los que terminan en méxico 😑
Creo que te equivocaste de vídeo...🤔
Sadly, some people have more money than common sense. But hey, fear sells, right?
3 1/2 inches ??? Thats hallf an inch
Sgt Pepper 3/4 of an inch on the sides. 1 inch in the floor
BulletmotorsportsInc I could up amour my landcruiser to a high standard for way less
If you do a make up vehicle like that with all the benefits more than worth the money.
I woulda gone 1in 1/4 rather ther 3/4 in
Buy a 5ton 6×6 and some ar500 steel and build something better, cheaper!!!
how about RPG? cannot penetrate
lol a rpg will penetrate, doesn't have reactive armor.
wait, you mean it can't resist a FSAPDS round?? forget it then!!
One question......why? You mean to tell me that there is a big enough market in the public for you to start building these things? With this being a RUclips video, aren't you marketing to the public? What is the point? It seems that Ford is starting to market the same type of stuff. What is the message being sent here? By Ford and everyone else doing this? Aren't police departments all across the United States acquiring military grade vehicles all of the sudden? In my opinion, we are not headed in the right direction, people are missing the point here.
Nirada Jones it sold in one week, that tells me it’s a good market. We have several armored vehicles in process. Supply and demand dictate the price.
No problem. I understand business and price points. But what I don't understand is why we need to build them in the first place? A legitimate question, not knocking The Hustle.
Martial law will be declared in America within the next 5 years with out a doubt..america start waking the fuck up... why all of a sudden did over 200 major walmart stores shut there doors? why have there been reports of loud booms and explosion like activity being heard underground?? and now there are apparent tunnels underground leading to these locations.?? consentration camps WAL MART - MARTiaLAW!
Just needs side and rear gun ports and a top mounted machine gun turret for use against rioters.....Minneapolis, LA, Columbus, NYC, Jacksonville, Atlanta etc, etc.
Rather get an old Russian BMP or something for cheaper.
the LENCO BEARCAT is way better