Great video! Is the 2007 H2 instrument cluster different from the 2003-2006? Everywhere I check for bulbs for It says 2003-2006 only. Do you have a P/N for 2007 bulbs? Thanks again.
Help my led light work with a tester but when plugged back in the the H2 lights don’t come on at all, my lights have a resister on one of the poles which is positive, but how do I know which four dots on the board is positive or negative to reattach to Dire need for HELP, About to drive me NUTZ, first time fixer, TIA
The square pad is positive and I would suggest you swap the led connection and hopefully, it will work please make to test it before soldering. Good luck, thanks for watching.
I have posted many videos of HUMMER H2 & H3 on my other channel, please check it out. Thanks. Easy Steps - ruclips.net/user/EasySteps_Sidhu Sidhu DIY - ruclips.net/user/SidhuDIY
@@SidhuDIY Good evening, thanks for your awesome videos, quick question, do you think is possible to install the AutoMeter 7000 InVision Universal LCD Dash on my Hummer H3??
I am posting a thanks message to my viewers/subscribers for your support. You are most welcome, glad to help. Thank you so much for the like and thanks for watching. My RUclips channel was hacked/hijacked last month (4/24/2019) and I just got it back today (5/5/2019). The hacker has deleted the information under the description of all my videos as well as comments and many videos.
Sidhu, I should have been more detailed in my description. It is the grab handle in front of the passenger front seat about knee level. Also interesting FWI, we know vehicle mfg use experimental parts and follow the life span by VIN. My 2008 H2 must have experimental brake pads, I have 185,000 miles and they are not close to needing replacement. WOW. Thanks for the great advice.
I have not found anyone with a Hummer 2008 H2. There is a grab handle in th middle of the dash about breast high on the passenger side. I do not know how to access it, lose on one side. HEPL
Replace HUMMER Grab Handle Driver Side & Passenger Side - ruclips.net/video/P7o8KGZuZLQ/видео.html How To Remove Dash Grab Handle on HUMMER H2 - ruclips.net/video/xL6yBem0U4I/видео.html
Sydhu, thanks but all of your videos on grab handles do not address the only one I need? it's the "DASH GRAB HANDLE" no one addresses how to remove it. Your H2 2008 same as mine, there are NO CLIPS to remove, do we have to take the entire dash off? Help please Thanks Stan Heston
I am posting a thanks message to my viewers/subscribers for your support. You are most welcome, glad to help. Thank you so much for the like and thanks for watching. My RUclips channel was hacked/hijacked last month (4/24/2019) and I just got it back today (5/5/2019). The hacker has deleted the information under the description of all my videos as well as comments and many videos.
I wish I could... It's not hard at all as you have seen it. You can do it without any problems, please try and share the results. Thanks for watching, good luck with your DIY project.
Sidhu My 2008 H2 passenger side dash handle is loose, I tried prying the square area with plastic device but it wont come out, I think it will break if I pry any harder. Do you have a suggestion. I enjoy your presentations
Glad to hear that! You are most welcome 😊 glad to help. Thank you so much for the like and thanks for watching.🙏🙌 Replace HUMMER Grab Handle Driver Side & Passenger Side - ruclips.net/video/P7o8KGZuZLQ/видео.html How To Remove Dash Grab Handle on HUMMER H2 - ruclips.net/video/xL6yBem0U4I/видео.html
I am posting a thanks message to my viewers/subscribers for your support. You are most welcome, glad to help. Thank you so much for the like and thanks for watching. My RUclips channel was hacked/hijacked last month (4/24/2019) and I just got it back today (5/5/2019). The hacker has deleted the information under the description of all my videos as well as comments and many videos.
I recently did this on my Chevy Silverado with LEDs from amazon. They should have resistors in them already. I did a super clean job and I thought it turned out great. I tested them with a 9 volt battery and some wire to be sure they all worked and they did. But when I put it in my truck only the blinker lights want to work. Any ideas as to what’s going on? All the other dash lights and stepper motors work as well, just not the lights behind the gauges.
Change the polarity of those 2 leds, I think I did mention in the video for those 2 locations you need to solder opposite than others. I hope it helps please share the results, thanks for watching.
Great Video As a matter of fact I’m doing mine as I watch, One question when soldering does it matter which end is which, does the positive have to go back on the positive or can you just solder away, Very Helpful video TIA
Good question, these LEDs don't have a polarity so you just solder them. Glad to hear that! You’re welcome 😊 glad to help. Thank you so much for the like and thanks for watching.🙏🙌
I am posting a thanks message to my viewers/subscribers for your support. Thanks, glad to help. Thank you so much for the like and thanks for watching. My RUclips channel was hacked/hijacked last month (4/24/2019) and I just got it back today (5/5/2019). The hacker has deleted the information under the description of all my videos as well as comments and many videos.
Thanks for asking and thanks for watching, sorry I don't do repairs. I do a DIY job and share with you all so that you can do it also, as you seen it, it's not hard at all, good luck with your DIY project.
Do you havea a polarity diagram for installing the bubs. I can't tell what the polarity is for the cruise control light or the 9 main lights. I got the turn signals lights to work after flipping them and all the main lights go on, but they stay on constantly and it seems to be interferring with the information gauge.
Sorry, I don't have the diagram, but the cruise control light will light up once you use it. I think I did a shown in the video that there are 2 settings for the bulb testing one is turn on most of the bulbs and with the second settings, it turns on individual bulbs. I hope it helps, thanks for watching.
@@SidhuDIY thank you. I did manage to find a polarity diagram for the 7 main lights, and i had to trial and error it for the blinkers, but the cruise control is frustrating me. I guess if it does not light up when i test it, i'll take it apart and try the other way. Thanks again..
@@SidhuDIY I went with the blue and it really is nice. On my son's H2 i went with white and it is really bright and very nice. By going with the blue LED's it is still strong but the brightness is muted. Highly recommend the blue. The LED's you recommended were right on point. Strongly recommend anyone doing this to use the LED"s you posted on your video. Thanks again.
@Phil Day Thanks for sharing the info. I am glad that you and your son liked it very much. Thanks for watching, enjoy. Wishing you and your family a very happy Merry Christmas.
Yes, you can test it every time, and actually, you should test it because if you put the wrong orientation then you can change the direction, and also you can find out if you have a bad led. Thanks for asking and thanks for watching.
I won't suggest it AND I will never do it... safety first because life is very precious. PLEASE don't think this way...airbag saves a life. I hope you fix the issue, thanks for watching.
Sure you can do that but in this cluster panel, you don't have an option. The only option you have to solder to the board, new cluster panel or other cars/SUVs have the option where you remove the bulbs by rotating and then plug back in. Thanks for watching. 🙏🙌
Yes, my channel was hacked and I am glad that RUclips was able to get the channel back and it messed up a lot of videos. All the comments were deleted and RUclips wasn't able to restore them. Thanks for watching.🙏
I am posting a thanks message to my viewers/subscribers for your support. You are most welcome, glad to help. Thank you so much for the like and thanks for watching. My RUclips channel was hacked/hijacked last month (4/24/2019) and I just got it back today (5/5/2019). The hacker has deleted the information under the description of all my videos as well as comments and many videos.
Great video! Is the 2007 H2 instrument cluster different from the 2003-2006? Everywhere I check for bulbs for It says 2003-2006 only. Do you have a P/N for 2007 bulbs? Thanks again.
Great video, I need to do this on my 2006 H2 cluster,,, Thank you very much for this video...
You are most welcome.
Thanks, glad to help.
Thank you so much for the like and thanks for watching.
Help my led light work with a tester but when plugged back in the the H2 lights don’t come on at all, my lights have a resister on one of the poles which is positive, but how do I know which four dots on the board is positive or negative to reattach to Dire need for HELP, About to drive me NUTZ, first time fixer, TIA
My blinker lights work which are red led
The square pad is positive and I would suggest you swap the led connection and hopefully, it will work please make to test it before soldering. Good luck, thanks for watching.
There is no square pad on my 2004 h2 panel at any of the light locations. All the pads are circles.@@SidhuDIY
Great job once again. I love watching all of your H2 videos. Keep up the good work and thank you for all of the detailed information.
Thanks, glad to help.
Thank you so much for the like and thanks for watching.
Thanks for sharing great feedback, it really makes my day. Thank you.
I have posted many videos of HUMMER H2 & H3 on my other channel, please check it out.
Thanks.
Easy Steps - ruclips.net/user/EasySteps_Sidhu
Sidhu DIY - ruclips.net/user/SidhuDIY
@@SidhuDIY Good evening, thanks for your awesome videos, quick question, do you think is possible to install the AutoMeter 7000 InVision Universal LCD Dash on my Hummer H3??
Very nice video, bright lights.
Thanks for sharing.
I am posting a thanks message to my viewers/subscribers for your support.
You are most welcome, glad to help.
Thank you so much for the like and thanks for watching.
My RUclips channel was hacked/hijacked last month (4/24/2019) and I just got it back today (5/5/2019). The hacker has deleted the information under the description of all my videos as well as comments and many videos.
Sidhu, I should have been more detailed in my description. It is the grab handle in front of the passenger front seat about knee level. Also interesting FWI, we know vehicle mfg use experimental parts and follow the life span by VIN. My 2008 H2 must have experimental brake pads, I have 185,000 miles and they are not close to needing replacement. WOW. Thanks for the great advice.
I have not found anyone with a Hummer 2008 H2. There is a grab handle in th middle of the dash about breast high on the passenger side. I do not know how to access it, lose on one side. HEPL
Glad to hear that! 😊 glad to help.
Thank you so much for the like and thanks for watching.🙏🙌
I do have videos posted, how to remove grab handles, let me give you a link.
Replace HUMMER Grab Handle Driver Side & Passenger Side - ruclips.net/video/P7o8KGZuZLQ/видео.html
How To Remove Dash Grab Handle on HUMMER H2 - ruclips.net/video/xL6yBem0U4I/видео.html
Sydhu, thanks but all of your videos on grab handles do not address the only one I need? it's the "DASH GRAB HANDLE" no one addresses how to remove it. Your H2 2008 same as mine, there are NO CLIPS to remove, do we have to take the entire dash off? Help please Thanks Stan Heston
Very good job, I am very much interested to do it on my instrument panel.
Thanks for sharing.👍
I am posting a thanks message to my viewers/subscribers for your support.
You are most welcome, glad to help.
Thank you so much for the like and thanks for watching.
My RUclips channel was hacked/hijacked last month (4/24/2019) and I just got it back today (5/5/2019). The hacker has deleted the information under the description of all my videos as well as comments and many videos.
I wanted to point out that you lose sound about 2:30 in
RUclips copyrighted music so they muted it.
Thanks for watching.🙏
Awesome....can i just send the cluster to you LoL
I wish I could... It's not hard at all as you have seen it.
You can do it without any problems, please try and share the results.
Thanks for watching, good luck with your DIY project.
Looks like your gauges aren’t zeroed.
Sidhu My 2008 H2 passenger side dash handle is loose, I tried prying the square area with plastic device but it wont come out, I think it will break if I pry any harder. Do you have a suggestion. I enjoy your presentations
Glad to hear that! You are most welcome 😊 glad to help.
Thank you so much for the like and thanks for watching.🙏🙌
Replace HUMMER Grab Handle Driver Side & Passenger Side - ruclips.net/video/P7o8KGZuZLQ/видео.html
How To Remove Dash Grab Handle on HUMMER H2 - ruclips.net/video/xL6yBem0U4I/видео.html
Nice video, thanks for sharing.
I am posting a thanks message to my viewers/subscribers for your support.
You are most welcome, glad to help.
Thank you so much for the like and thanks for watching.
My RUclips channel was hacked/hijacked last month (4/24/2019) and I just got it back today (5/5/2019). The hacker has deleted the information under the description of all my videos as well as comments and many videos.
I recently did this on my Chevy Silverado with LEDs from amazon. They should have resistors in them already. I did a super clean job and I thought it turned out great. I tested them with a 9 volt battery and some wire to be sure they all worked and they did. But when I put it in my truck only the blinker lights want to work. Any ideas as to what’s going on? All the other dash lights and stepper motors work as well, just not the lights behind the gauges.
Change the polarity of those 2 leds, I think I did mention in the video for those 2 locations you need to solder opposite than others. I hope it helps please share the results, thanks for watching.
I have the same problem Which two need to be changed ? Thx
Which two location ? Please
I watch all your video you make it very simple and easy thank you
max asghari I got it fixed
Just change the two
Thanks
Me gusto y me sirvio..gracias👍👌
Thanks, glad to help
Thank you so much for the like and thanks for watching.👍👌
Great Video As a matter of fact I’m doing mine as I watch, One question when soldering does it matter which end is which, does the positive have to go back on the positive or can you just solder away, Very Helpful video TIA
Good question, these LEDs don't have a polarity so you just solder them.
Glad to hear that! You’re welcome 😊 glad to help.
Thank you so much for the like and thanks for watching.🙏🙌
@@SidhuDIY Thanks again Keep on posting I’m learning a lot from your videos, H2’s are great as you are
Thank you.🙏🙌
Good job
I am posting a thanks message to my viewers/subscribers for your support.
Thanks, glad to help.
Thank you so much for the like and thanks for watching.
My RUclips channel was hacked/hijacked last month (4/24/2019) and I just got it back today (5/5/2019). The hacker has deleted the information under the description of all my videos as well as comments and many videos.
I have a 2003 hummer h2 I to re solder my speedometer gages and how much do you charges
Thanks for asking and thanks for watching, sorry I don't do repairs.
I do a DIY job and share with you all so that you can do it also, as you seen it, it's not hard at all, good luck with your DIY project.
Are those LEDs dimmable? Do they work with the factory rheostat?
Yes, dimmable and will work.
Glad to help! Thank you! 😊😊.
Thank you so much for the like and thanks for watching.🙏🙌
Do you havea a polarity diagram for installing the bubs. I can't tell what the polarity is for the cruise control light or the 9 main lights. I got the turn signals lights to work after flipping them and all the main lights go on, but they stay on constantly and it seems to be interferring with the information gauge.
Sorry, I don't have the diagram, but the cruise control light will light up once you use it.
I think I did a shown in the video that there are 2 settings for the bulb testing one is turn on most of the bulbs and with the second settings, it turns on individual bulbs.
I hope it helps, thanks for watching.
@@SidhuDIY thank you. I did manage to find a polarity diagram for the 7 main lights, and i had to trial and error it for the blinkers, but the cruise control is frustrating me. I guess if it does not light up when i test it, i'll take it apart and try the other way. Thanks again..
Great, thanks for sharing the info.
Good luck and enjoy the new cluster panel, btw what color you have now?
@@SidhuDIY I went with the blue and it really is nice. On my son's H2 i went with white and it is really bright and very nice. By going with the blue LED's it is still strong but the brightness is muted. Highly recommend the blue. The LED's you recommended were right on point. Strongly recommend anyone doing this to use the LED"s you posted on your video. Thanks again.
@Phil Day
Thanks for sharing the info. I am glad that you and your son liked it very much.
Thanks for watching, enjoy. Wishing you and your family a very happy Merry Christmas.
I’m doing the solder but some lights turn on with the other ones while I’m testing the ones I put on, is that okay?
Yes, you can test it every time, and actually, you should test it because if you put the wrong orientation then you can change the direction, and also you can find out if you have a bad led. Thanks for asking and thanks for watching.
Does the dimmer still work?
Yes, thanks for watching.🙏
Can you share a link to bulbs you bought?? Thank you
In the description, I always list the things I use with online links.
You are most welcome, glad to help, thanks for watching.🙏🙌
Nice
Thanks, Glad it was helpful!
Thank you so much for the like and thanks for watching.🙏🙌
Thank you, because I fixed the tablet lights of my car. Good Job! Good blessings
Thank You very much.
it is okay to take off one of bulbs permanently? for example the airbag indicator light?
I won't suggest it AND I will never do it... safety first because life is very precious.
PLEASE don't think this way...airbag saves a life.
I hope you fix the issue, thanks for watching.
@@SidhuDIY thank you sir
You are most welcome.
Haha the music over your voice over? 🤣
copyright music...lol.
Thanks for watching.🙏
Where can i get a black panel like yours cause I have a white panel
I meant the black inlay like the one in yo our video
Let me check
I know the whole panel Instrument Cluster Upgrade Kit - amzn.to/2JzlAIl
I found some on eBay but not on Amazon. Only I found is the whole panel, thanks for watching.
Ok, whats it called on ebay?
Type in the search bar - FACTORY STOCK OEM H2 HUMMER CLUSTER GAUGE FACE INLAY ONLY
Why did the sound cut out?
the background music copyright
Cant you just buy the bulbs and plug them in
Sure you can do that but in this cluster panel, you don't have an option.
The only option you have to solder to the board, new cluster panel or other cars/SUVs have the option where you remove the bulbs by rotating and then plug back in.
Thanks for watching. 🙏🙌
@@SidhuDIY mines a 2006 so I guess I would have to solder also
did you get hacked? most of the video has no sound...
Yes, my channel was hacked and I am glad that RUclips was able to get the channel back and it messed up a lot of videos. All the comments were deleted and RUclips wasn't able to restore them.
Thanks for watching.🙏
mYY niggA!
Thanks, glad to help.
Thank you so much for the like and thanks for watching.🙏🙌
Thanks for sharing, very nice video.
I am posting a thanks message to my viewers/subscribers for your support.
You are most welcome, glad to help.
Thank you so much for the like and thanks for watching.
My RUclips channel was hacked/hijacked last month (4/24/2019) and I just got it back today (5/5/2019). The hacker has deleted the information under the description of all my videos as well as comments and many videos.