excellent video; thank you for NOT continuously mugging at the camera like so many other talentless buffoons on RUclips who call themselves "influencers" you sir are a no BS doer.
One of the better designs I have seen so far because it seems very stable and the guides are only on the inside of the rails so you can pass road crossings and track changes.
Ottimo video, ma devi rendere stabile la ruota di dietro...un suggerimento è 2 ruote avanti e due dietro. è quello che vorrei provare io se trovo un fabbro a collaborare 😁@@RobertKocian
An excellent design in concept and execution. If I may add one small suggestion that would lower the parts number and speed both the fabrication and set up times: Instead of the four floating Rod Clamps to hold the two Connect Rods, construct four-sided tubes that the Connect Rods would telescope into and be held with a set screw at each end. This would eliminate 16 each of the ISO 7089 - 8 - 140 HV, ISO 4032 - M8 and ISO 4762 - M8 x 40 (parts #7, 8 and 9 in RK0002-01-0002_side_guide_001.pdf) as well as having to drill 32 holes for their placement. Instead, just four threaded holes or welded nuts for the set screws would be required.
i really like this version... i'm keen to ride with my son, or friends, and this adds the ability to bring one's own bike, easy convertibility, and, stability... i'd suggest, or may add for myself at least, a couple mounts for the front wheels (Yakima style?) on the cross-members, and, perhaps, a seat-post 'hitch' with connector, (and a 'smart caster'?) so rig can be towed by one of the bicycles? that said, most will likely DRIVE to the rail ride... so, i love what you got going here!! thank YOU!!
Brilliant Design! One thing I noted, I think you'll get less noise if you change out those steel bearings for roller skate or skateboard polymere wheels. I love the flexibility of the design, well done!
Here in the UK, many old railway lines have been converted to cycleways. I like this idea better, although I think a seatpost suspension will be needed for long journeys. :D
As an owner of a rail bike, I must compliment you for your work; best design I have seen yet. It solves a few problems that I have with my rail bike. One improvement I suggest is to add a platform for your poor little doggy to ride. Well done! Can you tell me where you are?
Hello. Thank you for your nice comment. It probably doesn't look like it from the video, but there is a lot of space for improvement. Of course you're right. Poor dog. That was a mistake. I'm not taking her to the rails anymore. I'm from Nesovice, Czech Republic. The abandoned railway we're on is here: mapy.cz/s/holuvebuta
@@RobertKocian It's a shame that we are on opposite sides of the planet. It would be fun to get together and swap ideas. I am in the PNW, up in the corner of the 48 lower states. If you have watched any of Peter Hoffman's videos, I have been on some trips with him, and a number of others on abandoned US rails, also some active roads by permission, with track warrants, believe it or not. Great adventures.
You do beautiful work but i dont understand why steel and not aluminum. Probly for strength. Its not too much material so maybe the weight is fine. I believe youre a great engineer. I dont understand why the back wheels stay on the tracks.
Congratulations on your work Robert! Greetings from México. I would like to know if this design is ok for riding "solo". This means with only one bike. I am not sure if my wife will want to ride along with me always, so I am considering that sometimes I would be alone with my dog. Thanks for your help! Mario.
Hi Mario. Honestly I never tried this on long distance. Just a few meters. It works for shrot distance. Of course the main idea was both option. Single biker or double biker. But, I have no experience for long travel in single. Sorry.
I like the dolly. Why is it so noisy? I don't think you need pneumatic tires (rails are perfectly smooth), just solid rubber to mitigate noise from there.
A motor car, or put-put(pop car) as we call them, has steel wheels and sounds like that. These are some motor cars: ruclips.net/video/XCwDnirGz3Q/видео.html
Да, я тоже что-то стремаюсь н счёт заднего колеса. Особенно когда руль не зафиксирован в одном положении - то шанс что заднее колесо слетит - есть. Так же - если это заброшеная ЖД - то рельсы могуть где-то быть шире если деервянные шпалы расползлись.
Wow, it really exist. Hey, perfect idea. I tried a few 3d flex print and some others plastic attempts. But it doesn't work. Every broke. Nylon bearing is ordered on aliexpress. Thank You 👍
This seems like the most stable and sturdy iteration I've seen yet. Great work 👏 I bought Mr. Bently's railbike plans but haven't gotten around to building it. Would you happen to have a spare build I could purchase from you?
Hello, If you mean existing parts, I don't have any. Just this prototype. If you're interested in the plans, you don't have to buy them. Look at the video description. Thank you for the compliments. But there's still a lot of space for improvement. I'm presenting this more as an inspiration.
Neboj, tvoje kolo tam není, tak se ti to stát nemůže 😜 Ale jo, občas to spadne. Vlastně vykolejí. Nesmím se moc vrtět. To je za cenu toho, že se to krásně vejde do kufru auta. Kdybych s tím jezdil často, asi to nějak předělám. Loni jsem byl s mladým jen jednou. Opuštěných tratí tady moc nemáme a s rychlíkem se mě závodit nechce 😀
This doesn't seem practical because we all seem to forget the rails are not perfect and might have trees or overgrowth on them. There's another RUclipsr that made an ebike rail bike that works on the street, off terrain and tracks. ruclips.net/video/R_JyDOIWHQk/видео.html
Наука
Good design. Your boy will remember this forever.
excellent video; thank you for NOT continuously mugging at the camera like so many other talentless buffoons on RUclips who call themselves "influencers" you sir are a no BS doer.
One of the better designs I have seen so far because it seems very stable and the guides are only on the inside of the rails so you can pass road crossings and track changes.
Hello and thank you for the nice comment. Yes, that was the goal. To get through the crossing and the turnout. But the stability isn't so great. 😊
Ottimo video, ma devi rendere stabile la ruota di dietro...un suggerimento è 2 ruote avanti e due dietro. è quello che vorrei provare io se trovo un fabbro a collaborare 😁@@RobertKocian
Excelente criatividade! Mostra que essas linhas abandonadas ainda podem ser útil!
An excellent design in concept and execution.
If I may add one small suggestion that would lower the parts number and speed both the fabrication and set up times: Instead of the four floating Rod Clamps to hold the two Connect Rods, construct four-sided tubes that the Connect Rods would telescope into and be held with a set screw at each end. This would eliminate 16 each of the ISO 7089 - 8 - 140 HV, ISO 4032 - M8 and ISO 4762 - M8 x 40 (parts #7, 8 and 9 in RK0002-01-0002_side_guide_001.pdf) as well as having to drill 32 holes for their placement. Instead, just four threaded holes or welded nuts for the set screws would be required.
Yes, that's a good idea. To hell with manufacturing, but tightening 16 bolts is a pain in the ass 😁
❤😂
,,
Looks like it needs a mower blade mounted and used on occasion
i really like this version... i'm keen to ride with my son, or friends, and this adds the ability to bring one's own bike, easy convertibility, and, stability... i'd suggest, or may add for myself at least, a couple mounts for the front wheels (Yakima style?) on the cross-members, and, perhaps, a seat-post 'hitch' with connector, (and a 'smart caster'?) so rig can be towed by one of the bicycles? that said, most will likely DRIVE to the rail ride... so, i love what you got going here!! thank YOU!!
Thank you for the plans - well done !
Brilliant Design! One thing I noted, I think you'll get less noise if you change out those steel bearings for roller skate or skateboard polymere wheels. I love the flexibility of the design, well done!
Very nice! Like the adjustments ! Maybe try that with an electric bike! Way too much fun!!!!
for less noise
you could use
rollerskaterwheels
instead of bearings
Ya, those steel bearings are way to noisy ! It was driving me crazy just watching the video ! skateboard wheels would work great and they're durable !
Sensacional !! Obrigado pela ideia e projeto !
How do you steer the thing?
Fantastic, well done!
Should make a second bigger box for your dog to ride in!❤🐕
Jste borec! Zdravím na Jižní Moravu!
I like everything but that NOISE! Could skateboard wheels or something else plastic, quiet…be used?
Yes, the bearing noise is annoying, but it fits in the track switch. A plastic something would certainly help.
That noise is good!
That (skate board wheel) would quiet up considerably ! Nice thought !
Nice build!
Love the design
Fodastikíssimo! Parabéns! Boa sorte e sucesso proces, sempre!
Rail bikes Yeah I like that idea Maybe I ll want to try them one of these days
Here in the UK, many old railway lines have been converted to cycleways. I like this idea better, although I think a seatpost suspension will be needed for long journeys. :D
They have rubber wheels which absorb all shocks on the rail. So no suspension necessary. It would be needed if you use steel wheel.
Nice work. Well done. Thanks.....
You get my dad-of-the-year vote
Nice Work!
Wat if a train comes ?? This is dangerous and legal ??
the rear wheel need guide wheels too.
excellent job.
Very Cool !!
Nečekal bych že toto bude dělat někdo z Čech, parádní práce 😁
As an owner of a rail bike, I must compliment you for your work; best design I have seen yet. It solves a few problems that I have with my rail bike. One improvement I suggest is to add a platform for your poor little doggy to ride.
Well done! Can you tell me where you are?
Hello. Thank you for your nice comment. It probably doesn't look like it from the video, but there is a lot of space for improvement. Of course you're right. Poor dog. That was a mistake. I'm not taking her to the rails anymore. I'm from Nesovice, Czech Republic. The abandoned railway we're on is here: mapy.cz/s/holuvebuta
@@RobertKocian It's a shame that we are on opposite sides of the planet. It would be fun to get together and swap ideas. I am in the PNW, up in the corner of the 48 lower states. If you have watched any of Peter Hoffman's videos, I have been on some trips with him, and a number of others on abandoned US rails, also some active roads by permission, with track warrants, believe it or not. Great adventures.
@@freewill1114I live in Ohio. Can you tell me where I can find abandoned railroad tracks?
I think I would be using an electric bike on both ends , and making a box in the middle for the dog to ride along .
Trop bien !❤
Awesome!!
That's pretty neat 👌 I don't care what anybody says.
love it!
how does the rear wheel not slide off the track? i feel like if u shift your weight too suddenly or something u may slide the wheel off ?
Yes you can. Especially if his steering is not locked.
this is the best design I've seen on the internet, the link for the plans isn't working anymore though
That is awesome.
Em sealed bearings need some thick O Rings or something. GREAT project/Hobby Craft, just that sound would drive me CRAZY lol.
old rollerblade wheels
Oh imma make something like this. Being on the east coast usa. We have ALOT of old railways.
Your design is neat but you also need to be commended on your video production as well ! 👍
Hello and Thank Your very much 🙂
You do beautiful work but i dont understand why steel and not aluminum. Probly for strength. Its not too much material so maybe the weight is fine. I believe youre a great engineer. I dont understand why the back wheels stay on the tracks.
Thay vòng bi gắn bên cạnh thanh ray đường tàu bằng bánh xe của giày trượt patin hoặc bánh cao su thì sẽ đỡ ồn hơn.
Working on it.
Bravo!
Congratulations on your work Robert! Greetings from México. I would like to know if this design is ok for riding "solo". This means with only one bike. I am not sure if my wife will want to ride along with me always, so I am considering that sometimes I would be alone with my dog. Thanks for your help!
Mario.
Hi Mario. Honestly I never tried this on long distance. Just a few meters. It works for shrot distance. Of course the main idea was both option. Single biker or double biker. But, I have no experience for long travel in single. Sorry.
@@RobertKocian Thanks for your reply!
Cool 👍
Is there something in the design that locks the steering to keep the back wheel tracking?
No
Very cool
I like the dolly. Why is it so noisy? I don't think you need pneumatic tires (rails are perfectly smooth), just solid rubber to mitigate noise from there.
Noisy is the side guide bearing. Metal on metal. And yes, it's annoying. But it fit in a track switch or a crossing. A skate wheel won't fit.
A motor car, or put-put(pop car) as we call them, has steel wheels and sounds like that. These are some motor cars: ruclips.net/video/XCwDnirGz3Q/видео.html
Nice design
Hope your solve the noise problem, would ceramic bearings do the trick?
Not yet, but I'm considering.
Excellent idea!! But...I have not abandoned rails near my home.
Что будет при повороте пути? Заднее колесо видимо соскочит с рельса...
Да, я тоже что-то стремаюсь н счёт заднего колеса. Особенно когда руль не зафиксирован в одном положении - то шанс что заднее колесо слетит - есть. Так же - если это заброшеная ЖД - то рельсы могуть где-то быть шире если деервянные шпалы расползлись.
Tres tres bon.
Would nylon bearing be durable enough instead of the steel ones ? Seems they'd be a lot quieter !
Wow, it really exist. Hey, perfect idea. I tried a few 3d flex print and some others plastic attempts. But it doesn't work. Every broke. Nylon bearing is ordered on aliexpress. Thank You 👍
Fabulous
Dobrá práce 👍👍👍
Zjišťoval jste, kolik a kde jsou v ČR tratě, na kterých by se to dalo využít?
Good! 👍 😊
Cool does it have to have two bikes or does it do good with one ?
One is enough. I hope so, haven't tried. But I suspect my son didn't tread much. 😀
😎
This seems like the most stable and sturdy iteration I've seen yet. Great work 👏 I bought Mr. Bently's railbike plans but haven't gotten around to building it. Would you happen to have a spare build I could purchase from you?
Hello,
If you mean existing parts, I don't have any. Just this prototype. If you're interested in the plans, you don't have to buy them. Look at the video description. Thank you for the compliments. But there's still a lot of space for improvement. I'm presenting this more as an inspiration.
Que sofrimento pro Caramelo!! Façam uma carretinha pra ele!!
sur le côté mais des roulettes de skateboard ça fait moins de bruit, elles sont en caoutchouc
Agreed. But they won't fit in the railroad switch.
could you build me one ? I can't weld...
would like to see a single bike set up as i have no friends and could hook up to my jetson bolt pro e bike
just don't mount the second bike
OMG รับน้ำหนักได้เป็นตัน ....
Думаю если с зади сапсан пустить веселей дело пойдет.
Se as rodas fossem de ferro ficaria mais leve p pedalar
Lack of a towing device for towing railway cars.)))
This seems really slow and inefficient. Needs to be a way to keep the back wheel on and less resistance on the front.
Do you have drawing for this?
Come on! Read the video description!!! ☝😉
Do you have plans for sale
Come on, read the video description 😉
Sve je dobro dok ne naiđe voz u punoj brzini.
Hezký :-) Já bych se bál, že mi spadne zadní kolo.
Neboj, tvoje kolo tam není, tak se ti to stát nemůže 😜 Ale jo, občas to spadne. Vlastně vykolejí. Nesmím se moc vrtět. To je za cenu toho, že se to krásně vejde do kufru auta. Kdybych s tím jezdil často, asi to nějak předělám. Loni jsem byl s mladým jen jednou. Opuštěných tratí tady moc nemáme a s rychlíkem se mě závodit nechce 😀
pov train comes 80kph behind
«POZOR VLAK!
(nebo horské koli)»
о Rockrider Decathlon
i guess in what ever country this is, it is not a crime to trespass on railroad property.
This doesn't seem practical because we all seem to forget the rails are not perfect and might have trees or overgrowth on them. There's another RUclipsr that made an ebike rail bike that works on the street, off terrain and tracks.
ruclips.net/video/R_JyDOIWHQk/видео.html
darwin was right
More compact version ruclips.net/video/NZXf3SVcoao/видео.html
More expensive version 😉
when u anoy everybody on roads and u need a new challenge...
Really ?? I cant open a jar of pickles without help. Nope dont think this is for me.
Those small wheels are nonsensical for long rides'
👎👎👎👎👎
Try some skateboard wheels/ ceramic bearings.. Swiss brand bearings I think.... nice work..
CHEERS😘. Get to the top FAST = Promo'SM !
Fuck your promo. I don't mind being invisible. 😉
@@RobertKociankefe