Here is a link to the instructions on the label in PDF format. www.krain.com//content/files/images/LandingPages/Rotors/K1/K1%204%20Inch%20Pop%20Up%20Rotor%20Instructions.pdf
I have the same issue. I have the nozzle set to 90 degrees but it always to goes to 270. I'll be reviewing the instructions below hopefully I can get it corrected.
I have K-Rain Pros. When I try to adjust the left start the riser doesn’t seem to turn freely. If I really crank it it will turn but it doesn’t seem right. Almost like I’m turning the whole sprinkler and not just adjusting it. Am I missing something?
The K1 has a Fixed Left Start and Adjustable Right Start, this means that to change where the head starts on the Left side, the bottom section of the pop-up riser has to be turned. The right side of rotation is fully adjustable with the Arc Adjustment located on top of the K1. Some other brands of rotor heads have a Fixed Right Start position and K1 can be used to replace these brands as well.
If the head does not respond to changing the arc adjustment, this would indicate something is broken internally inside the head. K-1 has a 2-year warranty, replacing the head is the only remedy.
@@Krain I have the exact same issue. No matter what I set it on, it always only goes to the 270 degree position. I purchased this last year at Home Depot and they said I can't return it without a receipt, which i no longer have. Can I send it back to you for either repair or replacement? Thank you
If the K1 does not reverse direction once it reaches the left or right stop it is broken or defective, replacing the head is the only remedy. The K1 has a two year warranty, if still under warranty contact: customerservice@krain.com
If the K1 does not reverse direction once it reaches the left or right stop it is broken or defective, replacing the head is the only remedy. The K1 has a two year warranty, if still under warranty contact: customerservice@krain.com
I have one of those
awesome! thanks for sharing.
How do you change/ replace the K1 sprinkler head? Mine is not adjusting to the 120 degree angle which i want, it keeps spraying over 270 degrees.
Here is a link to the instructions on the label in PDF format. www.krain.com//content/files/images/LandingPages/Rotors/K1/K1%204%20Inch%20Pop%20Up%20Rotor%20Instructions.pdf
@@Krain thank you.
I have the same issue. I have the nozzle set to 90 degrees but it always to goes to 270. I'll be reviewing the instructions below hopefully I can get it corrected.
How do you make it go 360deg?
This is very confusing and it doesn’t seem to work.
Insert K-Key or flat blade screwdriver into Arc Set Adjustment slot. Turn clockwise to increase the arc or counter-clockwise to decrease the arc.
I have K-Rain Pros. When I try to adjust the left start the riser doesn’t seem to turn freely. If I really crank it it will turn but it doesn’t seem right. Almost like I’m turning the whole sprinkler and not just adjusting it. Am I missing something?
email techsupport@krain.com and we can help you.
Thank you!
You're welcome!
What direction do you reduce the distance of the spray (from the screw)? Clockwise or counter?
clockwise
Clockwise looking at it from above or below?
you should make the keyhole better hope the im going going to get the k2 k2 and i hope it is better
thank you for the feedback, I will send to the engineering team.
Thank you.
You're welcome!
Can you set it to not rotate? I just want it to spray straight for a particular area in my yard.
You can set it to the lowest at 40º, it will rotate a little but can't set it to not rotate.
@@Krain Thank you. I am hunting for one of your products that works the same but can be set to No rotation. If you have one please share.
@@nfn7121 A Pro-S Spray with a fixed nozzle. Not sure what GPM you need.
My gears are broken after trying to adjust
The gears should not break on adjustment, please return to the store you purchased.
Can it also start from right to left? Thanks
The K1 has a Fixed Left Start and Adjustable Right Start, this means that to change where the head starts on the Left side, the bottom section of the pop-up riser has to be turned. The right side of rotation is fully adjustable with the Arc Adjustment located on top of the K1. Some other brands of rotor heads have a Fixed Right Start position and K1 can be used to replace these brands as well.
Do these have a built-in filter that you can clean?
No but you can clean the nozzle.
@@Krain Thanks.
😂🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
Mine keeps doing 270 degrees no matter what I set it at
If the head does not respond to changing the arc adjustment, this would indicate something is broken internally inside the head. K-1 has a 2-year warranty, replacing the head is the only remedy.
@@Krain I have the exact same issue. No matter what I set it on, it always only goes to the 270 degree position. I purchased this last year at Home Depot and they said I can't return it without a receipt, which i no longer have. Can I send it back to you for either repair or replacement? Thank you
@@justfishing5837me too same problem but on two new heads bought today so nothing should be broken .
Mine is keep rotate 135d no matter what I adjust!!!!
What do you do if it stops rotating? Rotates to one side, then doesn't come back. Is there a way to clean them out?
If the K1 does not reverse direction once it reaches the left or right stop it is broken or defective, replacing the head is the only remedy. The K1 has a two year warranty, if still under warranty contact: customerservice@krain.com
@@Krain Thanks! I'll have to start keeping receipts 😄
Dd
Need any assistance?
doesn't rotate; a ripoff
If the K1 does not reverse direction once it reaches the left or right stop it is broken or defective, replacing the head is the only remedy. The K1 has a two year warranty, if still under warranty contact: customerservice@krain.com
Same. No rotation at all. As if digging this junk up isn't bad enough, no competition and no function.