I'm a residential plumber and I would only recommend those hole saws for thin fiberglass or metal. For someone cutting wood I would recommend the Milwaukee hole hawg bits, those bits eat 2x4s with ease
I work in the tracs and I'm a piece worker you need both because sometimes when you need to make your hole and half way threw you find there's a nail and you can get the nail out but sometimes it's a very difficult spot and you'll possibly spend 30 min trying to take out and will be frustrated after so if you switch over to the hole saw and take it out easily and back to work make making money
Electrician here, for panel and trunking work the hole dozers are so good I've started replacing my starrett with them as the starrett burn out. Do limited wood so I stick to cheap flat bits if I'm unsure of the wood and Irwin selffeeds if clean wood On a side note I've the 14-30mm fixtec arbour, they really needs make one of these for 30mm+ as it's a huge time saver
@@ToddGT3 I'll be honest, I dont use ally much. We tend to gland into steel trunk, then slot between trunk and board with paxolin as grommet. Dont do many singles, all 4 core SWA so no Eddie currents to worry about
My 2018/19 kit that sized up to 1" ate through four studs easy 🤷 This kit is larger sizing, no experience yet. Given Milwaukee's screw ups recently I hope the larger sized kit I got today lives up. Yet, $15 for 4 ain't bad. Fvckers used to be $17 apiece lol. Aww, economic depression 🤗 /s Edit- most no one watching this will ever have the need for a Hole Hawg...
Awesome deal...but couple years ago i got the 20 piece bi metal kit that retails roughly $119 i got it on sale for $79.. everyone i work with says u didnt need that many.. but if i ever need some of those sizes i have them...
I called 2 local depots and neither one had them. I found it on the website for $74.99. I called them to see if they would match the price I saw on your live and they said yes. You order it and then you call them with order number and they issue a credit for the difference. Thank you for showing me the great deal.
@@leviramirez4276 They didn't ask for any. I mentioned that I saw it on a RUclips video and gave her the price and she said she searched and found it. No problems at all.
I know this is a year old, but just bought this hole kit for $15 HD. Back in 2018/19 bought a different 7 piece; they used the adapter 'trick ' then too. Four years still strong, adapter and arbor still solid. My preexisting kit was the smaller sizes whilst this was the larger sizes. Woo hoo!
I pick up a 13 piece hole saw kit for 40 dollars, just didn't have the pack out kit. Last month ago. Haven't used it yet, but know it will work on whatever I need it for. You have to scoop on the deals on the holidays.
I bought that hole saw set in the Packout box at Christmas for $54. I thought that was a great price. But this new deal really is a bargin because we can never get enough Packout boxes.
I’m a locksmith, the adjustable hole saw case is a great idea. Normally the hole saw cases don’t fit the sizes I need. I would get this for the cases alone.
The hole saw case is nice but a little flimsy but looks like it would hold up fine if it lives in the pack out box also. Also my Lenox hole saws are a little longer than Milwaukee still fit in the case
Can confirm that the Carbide tipped hole saw does kick ass. I do HVAC and I buzz 4-1/4” holes through hardi-plank siding and it’s still going strong (roughly after one year)
To stop the arbour from bottoming out and tightening against the the whole saw, I just wrap a piece of copper wire around the top of the arbour threads , I found that 14 gauge from standard electrical wire works perfect.
Where can you just buy the cases? I want one of the larger general purpose boxes since everything is right there displayed rather then a bin with everything thrown in
Got the packout with the small hole dozer set for 40 bucks yesterday and I also got the 13 pieace hole dozer set for 40 as well. Both worth it at that price brotha. On sale it's all worth it 😆👍 happy camper.
@@brandonjohnson901 nice, yeah I needed them to. Last time I let a deal like this pass I had to almost pay full price for a tool when I had no choice since I needed it at the moment. Not this time 🤣👍
Hey I’m about a month into tearing down and putting together portables for schools we put in lag bolts that are huge I believe they are about 6 inches long and have a head that a 15/16 socket fits it what size impact tench should I buy from Milwaukee
At the end of the video he says the deal is not online or on the app. In-store incentive 👍👍. Go getcha some! I'm gonna get me mine. Thanks cuzzin Vinny!
@@albertalmaguer7362 @VCG Construction Success Story! Huge shout out to my people at The Home Depot on brinkman in Houston Texas. We looked all over the store. Couldn't find the kit. So they let me build the kit and sold it to me for $34. These guys are FIRST CLASS (just like VCG construction!) And just as an added bonus I got to keep the part organizer trays too.
I got one las summer and put my laser in the other half. I wanted my laser in a packout so even though I had the previous hole dozer Packout kit set in styrofoam
Also hey hold the two half’s together of the modular homes we use a big 1/2 m18 impact wrench but it’s super heavy and I’m only a month in still gaining muscle to lug that shit around all day is there something smaller that can put out the same power
He Filmed a new outro! I love the channel and I love Milwaukee tool but unfortunately the nearest home Depot is 45 minutes away from me and it's just not worth it to go there
I love the red packout wish we had it in the UK I have packout but it's black and red here it looks much better great review I watched the whole video I'm normally out after 5 minutes 🤣👍
Just saw leaked pics of Milwaukee push mower on tool boss channel. Had no info other than an in store pic. So should be out month or 2. M18 FUEL. You have anyway to find out info on it with your contacts???
They should make kit for electrician or plumbing pipe like 1” pipe sizes to 2-1/2 pipe Or make a wafer hole saw kit. Said 4 “ wafer light hole saw cuts is 4” and 4 -1/8” a 4-1/4 inch 4-5/8” and 4-7/8 inch are all bits I used for 4 inch wafer light Make a kit for 6” wafer Make a kit for 5 “ wafer light And make a kit for 4” I be more inclined to buy it if for wafer lights I buy a lot of hole saw blades. If they bundle save a few bucks I buy it
Searched up the product numbers... These items do not come up . And the only thing available in my area I guess is the smaller pack the hole saws come in. The big pack out box isn't part of the deal anywhere I can find
Home Depot doesn’t even stock the Milwaukee carbide teeth hole saws in their Emeryville, CA store. I think I heard them say that store does more business than any Home Depot store in the United States so it sounds like you got misinformation. Why would Milwaukee discount the non carbide model to make room for the carbide model HD does not carry in their stores?
Thanks for the tip Vince. My local Home Depot (3 different stores Central Michigan) have these but they're asking $ 74.99, must be a regional deal ? Btw I picked up the Makita rear handle circular saw deal with the free batteries yesterday on your recommendation. Best deal for me even if it isn't on my battery platform aka Milwaukee. Thanks again.
It will be like $74. Buy it and them immediately call the customer service number listed on the website. Give them your oder number and they will issue a credit for the difference. I did it last week and it works.
My HD shows the $74 price online, however, the store shows them for 39.88 (W.Jordan, UT) upon scanning. Also, they were hidden on a shelf in the “No Home” aisle.
I've attempted to have several stores in Ohio price match other local stores and every single time they tell me to kick rocks. It seems that HD's "price match guarantee" really just comes down to how ethical the manager is at that particular store. And in my experience, that happens to be exactly 0% of the time.
Is it me or is this kit not worth it? You get an incomplete hole saw kit and an incomplete pack out box. However it does cost more to get both separately.
At my local Home Depot that’s been on the shelf since the Memorial Day sales I was thinking about it but I already have a lot of hole saws but Diablo had the spade but kit for 10 bucks and I got that
New outro! Nice!
Thanks for noticing Cuz! 👍🏻
I'm a residential plumber and I would only recommend those hole saws for thin fiberglass or metal. For someone cutting wood I would recommend the Milwaukee hole hawg bits, those bits eat 2x4s with ease
I work in the tracs and I'm a piece worker you need both because sometimes when you need to make your hole and half way threw you find there's a nail and you can get the nail out but sometimes it's a very difficult spot and you'll possibly spend 30 min trying to take out and will be frustrated after so if you switch over to the hole saw and take it out easily and back to work make making money
Electrician here, for panel and trunking work the hole dozers are so good I've started replacing my starrett with them as the starrett burn out.
Do limited wood so I stick to cheap flat bits if I'm unsure of the wood and Irwin selffeeds if clean wood
On a side note I've the 14-30mm fixtec arbour, they really needs make one of these for 30mm+ as it's a huge time saver
@@darylsavage119 are they any good and survive ally gland plates?
@@ToddGT3 I'll be honest, I dont use ally much. We tend to gland into steel trunk, then slot between trunk and board with paxolin as grommet. Dont do many singles, all 4 core SWA so no Eddie currents to worry about
My 2018/19 kit that sized up to 1" ate through four studs easy 🤷
This kit is larger sizing, no experience yet. Given Milwaukee's screw ups recently I hope the larger sized kit I got today lives up. Yet, $15 for 4 ain't bad. Fvckers used to be $17 apiece lol.
Aww, economic depression 🤗 /s
Edit- most no one watching this will ever have the need for a Hole Hawg...
Awesome deal...but couple years ago i got the 20 piece bi metal kit that retails roughly $119 i got it on sale for $79.. everyone i work with says u didnt need that many.. but if i ever need some of those sizes i have them...
I called 2 local depots and neither one had them. I found it on the website for $74.99. I called them to see if they would match the price I saw on your live and they said yes. You order it and then you call them with order number and they issue a credit for the difference. Thank you for showing me the great deal.
Okay I'll give it a try thanks.
Glad you scored Dan!
What did you show for proof for the price match
@@leviramirez4276 They didn't ask for any. I mentioned that I saw it on a RUclips video and gave her the price and she said she searched and found it. No problems at all.
@@danb2837 thank you ill let you know
I know this is a year old, but just bought this hole kit for $15 HD. Back in 2018/19 bought a different 7 piece; they used the adapter 'trick ' then too. Four years still strong, adapter and arbor still solid. My preexisting kit was the smaller sizes whilst this was the larger sizes. Woo hoo!
Bro get to the point. Half way through the video and still nothing relating to your headline.
Got the deal in Harrisburg p.a. they were not out I had to have an employee pull it they have 11 left
Glad you scored chris! 👍🏻
I CAN’T BELIEVE THIS WAS $40! I BOUGHT IT YESTERDAY! I LOVE THIS CHANNEL AND LOOKING AT THE DEALS!
Will pain you to know, it's $15 being clearanced out.
I'm not a Milwaukee guy but do have their hole dozers and I love em! I am gonna try to get this kit and see if my 13 piece kit fits in together.
I pick up a 13 piece hole saw kit for 40 dollars, just didn't have the pack out kit. Last month ago. Haven't used it yet, but know it will work on whatever I need it for. You have to scoop on the deals on the holidays.
I bought that hole saw set in the Packout box at Christmas for $54. I thought that was a great price. But this new deal really is a bargin because we can never get enough Packout boxes.
Got one yesterday but I had to ask the HD manager to help find it (it was up on a shelf top with "no home"). Thanks VCG!
Glad you scored! 👍🏻
Same at my HD
Same here how dumb lol
That is an awesome deal! Glad you were able to find that and share the info! Well done, have a great night! 👍
You da best ZZ!
I’m a locksmith, the adjustable hole saw case is a great idea. Normally the hole saw cases don’t fit the sizes I need. I would get this for the cases alone.
The hole saw case is nice but a little flimsy but looks like it would hold up fine if it lives in the pack out box also. Also my Lenox hole saws are a little longer than Milwaukee still fit in the case
Can confirm that the Carbide tipped hole saw does kick ass. I do HVAC and I buzz 4-1/4” holes through hardi-plank siding and it’s still going strong (roughly after one year)
Is that to put in dryer vents
Dryer vents, bathroom fan penetrations, running multiple line sets through a single penetration for a mini-split system, whatever I need it for😂
@Kilo5910420 Does it go through stucko? To make for linesets and for minisplits?
Me too
To stop the arbour from bottoming out and tightening against the the whole saw, I just wrap a piece of copper wire around the top of the arbour threads , I found that 14 gauge from standard electrical wire works perfect.
Copper washer.
Just picked up that kit in Las Vegas! Thanks for the heads-up!
Now I need to find a second small red box for inside. Any idea where I can get that so I have two red kit boxes in that box?
Glad you scored!
@VCGconstruction I picked up 5 cuz thanks for the hook-up!!!!!
Glad you scored Brandon! 👍🏻
Where can you just buy the cases? I want one of the larger general purpose boxes since everything is right there displayed rather then a bin with everything thrown in
Still $39.88 at my home depot, and I just got it. Vince, you are awesome!
Can find it anywhere
Thanks just got same set for 25 no packout great buy
Are regular Milwaukee non fuel tools as good?
Got the packout with the small hole dozer set for 40 bucks yesterday and I also got the 13 pieace hole dozer set for 40 as well. Both worth it at that price brotha. On sale it's all worth it 😆👍 happy camper.
Same hella good deal..also got 150 razer blades for 9.98 from the 4th of July sale sale stuff.
@@brandonjohnson901 nice, yeah I needed them to. Last time I let a deal like this pass I had to almost pay full price for a tool when I had no choice since I needed it at the moment. Not this time 🤣👍
Anyone know where you can buy the small kit box that fits inside solo?
@VCG I got 3. Always got the hot tips.
Hot tips?
I just looked on the HD website and they INCREASED the price from $39.95 to $74.99 over the last 30 days! What is going on on with that?
I just cut in about 30 hi hats with the 6" Dozer hole saw, on a Gen 3 M18 Hammer Drill/Driver...yeah, Sh*t is NO JOKE....GO TEAM RED!
I'm digging the updated outro!!
Bought that kit soupy because I saw it here, thanx for the advice bossman!
Hey I’m about a month into tearing down and putting together portables for schools we put in lag bolts that are huge I believe they are about 6 inches long and have a head that a 15/16 socket fits it what size impact tench should I buy from Milwaukee
@VCG. Vince I like the scoop Cuz. 🙇🏾♂️✌🏾🏆🤙🏾
Thanks Antonio, we appreciate it! 👍🏻
Oh man might be store specific. I just went to purchase and it's being sold for $74.99
At the end of the video he says the deal is not online or on the app. In-store incentive 👍👍. Go getcha some! I'm gonna get me mine. Thanks cuzzin Vinny!
@@ThomasThiemeJr oh heck yeah thank you I'm actually on my way to the depot right now
@@albertalmaguer7362 @VCG Construction Success Story! Huge shout out to my people at The Home Depot on brinkman in Houston Texas. We looked all over the store. Couldn't find the kit. So they let me build the kit and sold it to me for $34. These guys are FIRST CLASS (just like VCG construction!) And just as an added bonus I got to keep the part organizer trays too.
Is that big box really useful without dividers or organisers?
Thanks Vince & VCG 👍
You got it Jamal!
I will get this! Thanks for the heads up Vince.
Let me know how you make out Michael!!
Are non fuel Milwaukee M18 as good?
I got one las summer and put my laser in the other half. I wanted my laser in a packout so even though I had the previous hole dozer Packout kit set in styrofoam
@vcgconstruction Newark, DE store 1601 has like 8 of them as of 8/8 bought one left the rest for the very cool gang
Thanks Alex! 👍🏻
Also hey hold the two half’s together of the modular homes we use a big 1/2 m18 impact wrench but it’s super heavy and I’m only a month in still gaining muscle to lug that shit around all day is there something smaller that can put out the same power
Where do I order this deal?
He Filmed a new outro! I love the channel and I love Milwaukee tool but unfortunately the nearest home Depot is 45 minutes away from me and it's just not worth it to go there
Can someone post the internet # so I can check brickseek? Can't seem to find this kit
Are the saws in that $34 kit the sizes needed to install a standard door knob? If that’s the case I’m picking one up if I can find it.
Shoot... worth it just for the Packout case really.
I got the previous gen 12 piece on sale for $39; now smaller kits are coming with pack out!? I feel like I got hosed some how. :(
Does it handle "ASBESTOS" wonder board?
I’m definitely scoring this deal. Thanks 🙏 Vince 👍😎
👍🏻
The deal is nice, but the video is too long. I'd have said all that in less than 3 minutes lol.
@@ItsNotInventedYet you can never have to much of a good thing
Time for a hole saw shootout! Milwaukee v. Starrett!
Can we maybe get a review on the new carbide hole saws? I'll be looking forward to that one
I love the red packout wish we had it in the UK I have packout but it's black and red here it looks much better great review I watched the whole video I'm normally out after 5 minutes 🤣👍
So we shouldn't buy these if we charge by the hour right? 🤔
Love the tanto spyderco what a great knife
Love the new exit too
The new exit is great!
Just saw leaked pics of Milwaukee push mower on tool boss channel. Had no info other than an in store pic. So should be out month or 2. M18 FUEL. You have anyway to find out info on it with your contacts???
Where are they available for this deal?
They should make kit for electrician or plumbing pipe like 1” pipe sizes to 2-1/2 pipe
Or make a wafer hole saw kit. Said 4 “ wafer light hole saw cuts is 4” and 4 -1/8” a 4-1/4 inch 4-5/8” and 4-7/8 inch are all bits I used for 4 inch wafer light
Make a kit for 6” wafer
Make a kit for 5 “ wafer light
And make a kit for 4”
I be more inclined to buy it if for wafer lights
I buy a lot of hole saw blades.
If they bundle save a few bucks I buy it
Ive used them for years i dont have too many complaints with it. For 2 bys i prefer their self feed forstner bits
I can´t believe it´s not butter !!
Very cool gang 🤘
Searched up the product numbers... These items do not come up . And the only thing available in my area I guess is the smaller pack the hole saws come in. The big pack out box isn't part of the deal anywhere I can find
It's a set have them look it up in store under no home. It's online as well cuz.
@@brandonjohnson901 thank you sir
These are on sale now for $98 Canadian for just the flimsy case, hole saws and no half pack out.
@VCG I wish they had it available to buy that is a killer deal but it says out of stock
just got this tonight and it is now $30 at HD
I am a milwaukee guy but for cutting metal i will go with lenox,bosh an eclipse.
I got the 13 piece for $39.88 back when it was on sale.
I'm gonna go out on a limb here and say that they had that mispriced and you got lucky before they realized it. Good going dood!
Nah, these are priced the exact same way in my local Depots. It’s a promo.
That is a cool deal, I may snatch one up.
I got it and used foam for my oscillating tool to fill in the packout. Worth 40 bucks!
Scored on Monday ☝️
Sweet Tad!
Where?!
I bought A Milwaukee Hole saw set today at Home Depot. I will tell you what I think of it.
when
Home Depot doesn’t even stock the Milwaukee carbide teeth hole saws in their Emeryville, CA store. I think I heard them say that store does more business than any Home Depot store in the United States so it sounds like you got misinformation. Why would Milwaukee discount the non carbide model to make room for the carbide model HD does not carry in their stores?
Thanks for the tip Vince. My local Home Depot (3 different stores Central Michigan) have these but they're asking $ 74.99, must be a regional deal ? Btw I picked up the Makita rear handle circular saw deal with the free batteries yesterday on your recommendation. Best deal for me even if it isn't on my battery platform aka Milwaukee. Thanks again.
See my comment. You can get the deal online. I got mine delivered yesterday 👍
Not showing up on my HD app at that price.
It will be like $74. Buy it and them immediately call the customer service number listed on the website. Give them your oder number and they will issue a credit for the difference. I did it last week and it works.
My HD shows the $74 price online, however, the store shows them for 39.88 (W.Jordan, UT) upon scanning. Also, they were hidden on a shelf in the “No Home” aisle.
Thanks I'll check tomorrow, I can always use more packout.
At my local HD the kit is still $74. I will keep my eye open for it to go on sale
Update it just went online for 39 buck i just ordered 2
Got the kit... Filled it with bits. Wish the hole dozer case was constructed better, its kinda cheap.
I got 2 of them today!
August 25th need a one year review of the Veto Pro PAC tech!
I regret not buying 2 and it is definitely is a good deal
Love how in some of the pictures the trigger isn’t even pulled on the combi
Will they match other stores sales?
I've attempted to have several stores in Ohio price match other local stores and every single time they tell me to kick rocks. It seems that HD's "price match guarantee" really just comes down to how ethical the manager is at that particular store. And in my experience, that happens to be exactly 0% of the time.
Yo sweet deal, hope I can get one these at my homedepot too.
i got it on sale for 40$ cant go wrong
Wish we had these deals n belfast
As of today I was able to find these hole dozer pack
I Need a 28 piece kit. Hopefully the make one. Metal wise the 1st gen hole dozer is great!
If this is the VCG Construction channel, why is it announced that it's self sponsored...
Is it me or is this kit not worth it? You get an incomplete hole saw kit and an incomplete pack out box. However it does cost more to get both separately.
Thanks VCG!!! Always passing the deals on. 💯
I just bought this kit on clearance at HD for $29.
I got the same kit
I found some even know they showed them out of stock
ThAts right Cuz, you gotta play to win!
Vince, I see you are using a different Spyderco knife, what happened to the Yojimbo? I have that blade and MAN it is sssssharp!!!
At my local Home Depot that’s been on the shelf since the Memorial Day sales I was thinking about it but I already have a lot of hole saws but Diablo had the spade but kit for 10 bucks and I got that
These deals never make it up across the border, or I’d jump on them!
Your from Canada too eh! Tell me about it!
Can’t find them no where
🍩🍦☕☕☕ I already did when you were at Lowe's I mentioned it to you Won't be available at all stores until next month that's what my rep said
Thanks Kona! 👍🏻
2inch is not 4inch. Why would i need a kit with 2inch as top?
Good deal but not at our Home depot☹.
im not sure im a fan of that storage box they come in. Tool itself look good but not that box and the way it closes.
Any gutter guys out there?.well 2:them hole saws come in handy for outlets.
Hi Vince, Milwaukee always produces quality tools and always will, I like those whole saws sharp,